Laser : Current status? Wot no power

NivagSwerdna

unread,

Feb 1, 2020, 6:58:56 AM2/1/20

to London Hackspace

In the space and found the Laser PC turned off.... turned it on.... The Laser itself however won't come to life... (the ACNode is glowing green serenely) but turning the key doesn't show any sign of life... I checked the obvious but all seems to be plugged in.

Any tips? Shall I put it out of order?

Simon Allcorn

unread,

Feb 1, 2020, 7:01:32 AM2/1/20

to london-h...@googlegroups.com

twist the red emergency stop button on the laser cutter then try again

Simon

Sent from my dog and bone

On 1 Feb 2020, at 11:59, NivagSwerdna <gavina...@gmail.com> wrote:

In the space and found the Laser PC turned off.... turned it on.... The Laser itself however won't come to life... (the ACNode is glowing green serenely) but turning the key doesn't show any sign of life... I checked the obvious but all seems to be plugged in.
Any tips? Shall I put it out of order?

--
You received this message because you are subscribed to the Google Groups "London Hackspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to london-hack-sp...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/london-hack-space/413d96e9-e04a-448b-8aa2-8c41738461ca%40googlegroups.com.

NivagSwerdna

unread,

Feb 1, 2020, 7:04:27 AM2/1/20

to London Hackspace

It lives! Thanks for the swift response!

On Saturday, 1 February 2020 12:01:32 UTC, Simon Allcorn wrote:

twist the red emergency stop button on the laser cutter then try again

Simon

Sent from my dog and bone

On 1 Feb 2020, at 11:59, NivagSwerdna <gavina...@gmail.com> wrote:

In the space and found the Laser PC turned off.... turned it on.... The Laser itself however won't come to life... (the ACNode is glowing green serenely) but turning the key doesn't show any sign of life... I checked the obvious but all seems to be plugged in.
Any tips? Shall I put it out of order?

--
You received this message because you are subscribed to the Google Groups "London Hackspace" group.

To unsubscribe from this group and stop receiving emails from it, send an email to london-h...@googlegroups.com.

NivagSwerdna

unread,

Feb 1, 2020, 7:54:10 AM2/1/20

to London Hackspace

Despite getting the thing to turn on I am giving up due to Multiple VCOD

I tried changing no shape by moving, rotation and simplification etc but could not get it to work sufficiently to be practical.

I left the machine in service for now. Good Luck!!

Reply all

Reply to author

Forward