[PATCH v5 04/13] drm/panel: rocktech-jh057n00900: Rename the driver to st7703

[Ondrej Jirman]

This rename is done so that the driver matches the name of the
display controller and in preparation for adding support for more
panels to the driver.

This is just a basic file rename, with no code changes.

Signed-off-by: Ondrej Jirman <meg...@megous.com>
---
drivers/gpu/drm/panel/Kconfig | 26 +++++++++----------
drivers/gpu/drm/panel/Makefile | 2 +-
...-jh057n00900.c => panel-sitronix-st7703.c} | 0
3 files changed, 14 insertions(+), 14 deletions(-)
rename drivers/gpu/drm/panel/{panel-rocktech-jh057n00900.c => panel-sitronix-st7703.c} (100%)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 39055c1f0e2f..de2f2a452be5 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -283,19 +283,6 @@ config DRM_PANEL_RAYDIUM_RM68200
Say Y here if you want to enable support for Raydium RM68200
720x1280 DSI video mode panel.

-config DRM_PANEL_ROCKTECH_JH057N00900
- tristate "Rocktech JH057N00900 MIPI touchscreen panel"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Say Y here if you want to enable support for Rocktech JH057N00900
- MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
- resolution of 720x1440 pixels, a built in backlight and touch
- controller.
- Touch input support is provided by the goodix driver and needs to be
- selected separately.
-
config DRM_PANEL_RONBO_RB070D30
tristate "Ronbo Electronics RB070D30 panel"
depends on OF
@@ -395,6 +382,19 @@ config DRM_PANEL_SITRONIX_ST7701
ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
system interfaces.

+config DRM_PANEL_SITRONIX_ST7703
+ tristate "Sitronix ST7703 based MIPI touchscreen panels"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for Sitronix ST7703 based
+ panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
+ the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
+ in backlight and touch controller.
+ Touch input support is provided by the goodix driver and needs to be
+ selected separately.
+
config DRM_PANEL_SITRONIX_ST7789V
tristate "Sitronix ST7789V panel"
depends on OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index de74f282c433..e45ceac6286f 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o
obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o
obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
-obj-$(CONFIG_DRM_PANEL_ROCKTECH_JH057N00900) += panel-rocktech-jh057n00900.o
obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
@@ -41,6 +40,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
+obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
similarity index 100%
rename from drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
rename to drivers/gpu/drm/panel/panel-sitronix-st7703.c
--
2.27.0

[Linus Walleij]

On Fri, Jun 26, 2020 at 2:56 AM Ondrej Jirman <meg...@megous.com> wrote:

> This rename is done so that the driver matches the name of the
> display controller and in preparation for adding support for more
> panels to the driver.
>
> This is just a basic file rename, with no code changes.
>
> Signed-off-by: Ondrej Jirman <meg...@megous.com>

This is the right thing to do.
Reviewed-by: Linus Walleij <linus....@linaro.org>

Yours,
Linus Walleij

[Ondrej Jirman]

This rename is done so that the driver matches the name of the
display controller and in preparation for adding support for more
panels to the driver.

This is just a basic file rename, with no code changes.

Signed-off-by: Ondrej Jirman <meg...@megous.com>

Reviewed-by: Linus Walleij <linus....@linaro.org>