Pull request: u-boot-sunxi/master for v2022.07

[Andre Przywara]

Hi Tom,

please pull the sunxi/master branch, containing the first part of the
2022.07 changes.

A big part is the DM pinctrl driver, which allows us to get rid of quite
some custom pinmux code and make the whole port much more robust. Many
thanks to Samuel for that nice contribution! There are some more or less
cosmetic warnings about missing clocks right now, I will send the trivial
fixes for that later.
Another big chunk is the mkimage upgrade, which adds RISC-V and TOC0
(secure images) support. Both features are unused at the moment, but I
have an always-secure board that will use that once the DT lands in the
kernel.
On top of those big things we have some smaller fixes, improving the
I2C DM support, fixing some H6/H616 early clock setup and improving the
eMMC boot partition support.

The gitlab CI completed successfully, including the build test for all
161 sunxi boards. I also boot tested on a A64, A20, H3, H6, and F1C100
board. USB, SD card, eMMC, and Ethernet all work there (where applicable).

Thanks,
Andre
===========================
The following changes since commit e4b6ebd3de982ae7185dbf689a030e73fd06e0d2:

Prepare v2022.04 (2022-04-04 10:31:32 -0400)

are available in the Git repository at:

https://source.denx.de/u-boot/custodians/u-boot-sunxi.git master

for you to fetch changes up to 69a0ea007826bf27584943591e61ee087683fdca:

sunxi: defconfig: enable eMMC boot partition support (2022-04-05 00:08:46 +0100)

----------------------------------------------------------------
Andre Przywara (3):
spl: mmc: extend spl_mmc_boot_mode() to take mmc argument
sunxi: eMMC: Improve automatic boot source detection
sunxi: defconfig: enable eMMC boot partition support

Angelo Dureghello (1):
sunxi: H3: fix non working console on uart2

Baltazar Radics (1):
Add ethernet0 alias in Nanopi NEO's device tree

Icenowy Zheng (4):
mkimage: add a flag to describe whether -A is specified
mkimage: sunxi_egon: refactor for multi-architecture support
mkimage: sunxi_egon: add support for riscv
sunxi: specify architecture when generating SPL boot image

Jernej Skrabec (3):
sunxi: prcm: Add a few registers
sunxi: clock: H6/H616: Add resistor calibration
sunxi: clock: H6: Adjust PLL LDO before clock setup

Samuel Holland (28):
sunxi: pinctrl: Create the driver skeleton
sunxi: pinctrl: Implement pin muxing functions
sunxi: pinctrl: Implement get_pin_muxing function
sunxi: pinctrl: Implement pin configuration
pinctrl: sunxi: Add UART pinmuxes
pinctrl: sunxi: Add sun4i EMAC pinmuxes
net: sunxi_emac: Remove non-DM pin setup
pinctrl: sunxi: Add sunxi GMAC pinmuxes
sunxi: Remove non-DM GMAC pin setup
pinctrl: sunxi: Add sun8i EMAC pinmuxes
net: sun8i_emac: Remove non-DM pin setup
pinctrl: sunxi: Add I2C pinmuxes
sunxi: Remove options and setup code for I2C2-I2C4
i2c: sun6i_p2wi: Only do non-DM pin setup for non-DM I2C
i2c: sun8i_rsb: Only do non-DM pin setup for non-DM I2C
pinctrl: sunxi: Add MMC pinmuxes
sunxi: Remove non-DM MMC pin setup
pinctrl: sunxi: Add the A64 PWM pinmux
pwm: sunxi: Remove non-DM pin setup
pinctrl: sunxi: Add SPI0 pinmuxes
spi: sun4i_spi: Remove non-DM pin setup
tools: mkimage: Add Allwinner TOC0 support
sunxi: Support SPL in both eGON and TOC0 images
sunxi: Support building a SPL as a TOC0 image
i2c: sun6i_p2wi: Initialize chips in .child_pre_probe
i2c: sun6i_p2wi: Add support for DM clocks and resets
i2c: sun8i_rsb: Initialize chips in .child_pre_probe
i2c: sun8i_rsb: Add support for DM clocks and resets

MAINTAINERS | 2 +
arch/arm/Kconfig | 1 +
arch/arm/dts/sun8i-h3-nanopi-neo.dts | 4 +
arch/arm/include/asm/arch-sunxi/gpio.h | 18 +-
arch/arm/include/asm/arch-sunxi/i2c.h | 11 +-
arch/arm/include/asm/arch-sunxi/prcm_sun50i.h | 10 +
arch/arm/include/asm/arch-sunxi/spl.h | 3 +-
arch/arm/mach-imx/spl.c | 2 +-
arch/arm/mach-k3/am642_init.c | 2 +-
arch/arm/mach-k3/am6_init.c | 2 +-
arch/arm/mach-k3/j721e_init.c | 2 +-
arch/arm/mach-k3/j721s2_init.c | 2 +-
arch/arm/mach-mvebu/spl.c | 2 +-
arch/arm/mach-omap2/boot-common.c | 2 +-
arch/arm/mach-rockchip/spl.c | 2 +-
arch/arm/mach-socfpga/spl_a10.c | 2 +-
arch/arm/mach-socfpga/spl_gen5.c | 2 +-
arch/arm/mach-stm32mp/spl.c | 2 +-
arch/arm/mach-sunxi/Kconfig | 24 +-
arch/arm/mach-sunxi/board.c | 126 +++-
arch/arm/mach-sunxi/clock_sun50i_h6.c | 20 +-
arch/arm/mach-sunxi/dram_sun50i_h6.c | 8 +-
arch/arm/mach-sunxi/dram_sun50i_h616.c | 7 +-
arch/arm/mach-sunxi/spl_spi_sunxi.c | 4 +-
arch/arm/mach-uniphier/mmc-boot-mode.c | 5 +-
board/sunxi/Kconfig | 24 +
board/sunxi/board.c | 59 --
board/sunxi/gmac.c | 55 --
boot/image.c | 1 +
common/spl/spl_mmc.c | 4 +-
configs/bananapi_m64_defconfig | 1 +
configs/emlid_neutis_n5_devboard_defconfig | 1 +
configs/pine64-lts_defconfig | 1 +
configs/pine_h64_defconfig | 1 +
configs/sopine_baseboard_defconfig | 1 +
drivers/gpio/sunxi_gpio.c | 130 +---
drivers/i2c/sun6i_p2wi.c | 27 +-
drivers/i2c/sun8i_rsb.c | 61 +-
drivers/net/sun8i_emac.c | 90 ---
drivers/net/sunxi_emac.c | 7 +-
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 2 +-
drivers/pinctrl/sunxi/Kconfig | 127 ++++
drivers/pinctrl/sunxi/Makefile | 3 +
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 897 +++++++++++++++++++++++++
drivers/pwm/sunxi_pwm.c | 11 -
drivers/spi/spi-sunxi.c | 84 ---
include/image.h | 1 +
include/spl.h | 3 +-
include/sunxi_image.h | 37 ++
scripts/Makefile.spl | 5 +-
tools/Makefile | 7 +-
tools/imagetool.h | 1 +
tools/mkimage.c | 1 +
tools/sunxi_egon.c | 73 ++-
tools/sunxi_toc0.c | 907 ++++++++++++++++++++++++++
56 files changed, 2325 insertions(+), 563 deletions(-)
create mode 100644 board/sunxi/Kconfig
create mode 100644 drivers/pinctrl/sunxi/Kconfig
create mode 100644 drivers/pinctrl/sunxi/Makefile
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sunxi.c
create mode 100644 tools/sunxi_toc0.c

[Tom Rini]

Applied to u-boot/master, thanks!

--
Tom