[PATCH] arm64: dts: allwinner: h5: Add deinterlace node

[Jernej Skrabec]

Deinterlace core is completely compatible to H3.

Add a node for it.

Signed-off-by: Jernej Skrabec <jernej....@siol.net>
---
Note: I didn't add H5 fallback, since the only reason why this node
is not in common H3/H5 dtsi is that it's located on different addresses.

If anyone feel fallback compatible is needed, I'll add it in next revision.

arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 10489e508695..578a63dedf46 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -121,6 +121,19 @@ crypto: crypto@1c15000 {
resets = <&ccu RST_BUS_CE>;
};

+ deinterlace: deinterlace@1e00000 {
+ compatible = "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01e00000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
mali: gpu@1e80000 {
compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
reg = <0x01e80000 0x30000>;
--
2.30.0

[Maxime Ripard]

On Wed, Jan 06, 2021 at 07:25:23PM +0100, Jernej Skrabec wrote:
> Deinterlace core is completely compatible to H3.
>
> Add a node for it.
>
> Signed-off-by: Jernej Skrabec <jernej....@siol.net>
> ---
> Note: I didn't add H5 fallback, since the only reason why this node
> is not in common H3/H5 dtsi is that it's located on different addresses.
>
> If anyone feel fallback compatible is needed, I'll add it in next revision.

Applied, thanks
Maxime