Ondrej Jirman
unread,Jun 16, 2020, 8:32:18 PM6/16/20Sign in to reply to author
Sign in to forward
You do not have permission to delete messages in this group
Sign in to report message
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to linux...@googlegroups.com, Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Rob Herring, Maxime Ripard, Chen-Yu Tsai, Linus Walleij, Icenowy Zheng, dri-...@lists.freedesktop.org, devic...@vger.kernel.org, linux-...@vger.kernel.org, linux-ar...@lists.infradead.org, Samuel Holland, Martijn Braam, Luca Weiss, Bhushan Shah, Ondrej Jirman
From: Icenowy Zheng <
ice...@aosc.io>
PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
display.
Backlight levels curve was optimized by Martijn Braam using a
lux meter.
Add its device nodes.
Signed-off-by: Icenowy Zheng <
ice...@aosc.io>
Signed-off-by: Martijn Braam <
mar...@brixit.nl>
Signed-off-by: Ondrej Jirman <
meg...@megous.com>
---
.../allwinner/sun50i-a64-pinephone-1.1.dts | 19 ++++++++++
.../dts/allwinner/sun50i-a64-pinephone.dtsi | 35 +++++++++++++++++++
2 files changed, 54 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
index 06a775c41664..3e99a87e9ce5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -9,3 +9,22 @@ / {
model = "Pine64 PinePhone Braveheart (1.1)";
compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
};
+
+&backlight {
+ power-supply = <®_ldo_io0>;
+ /*
+ * PWM backlight circuit on this PinePhone revision was changed since
+ * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
+ * being off is around 20%. Duty cycle for the lowest brightness level
+ * also varries quite a bit between individual boards, so the lowest
+ * value here was chosen as a safe default.
+ */
+ brightness-levels = <
+ 774 793 814 842
+ 882 935 1003 1088
+ 1192 1316 1462 1633
+ 1830 2054 2309 2596
+ 2916 3271 3664 4096>;
+ num-interpolated-steps = <50>;
+ default-brightness-level = <400>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index cefda145c3c9..e60b57f8ac14 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -16,6 +16,13 @@ aliases {
serial0 = &uart0;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+ enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ /* Backlight configuration differs per PinePhone revision. */
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -84,6 +91,30 @@ &dai {
status = "okay";
};
+&de {
+ status = "okay";
+};
+
+&dphy {
+ status = "okay";
+};
+
+&dsi {
+ vcc-dsi-supply = <®_dldo1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "xingbangda,xbd599", "sitronix,st7703";
+ reg = <0>;
+ reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
+ iovcc-supply = <®_dldo2>;
+ vcc-supply = <®_ldo_io0>;
+ backlight = <&backlight>;
+ };
+};
+
&ehci0 {
status = "okay";
};
@@ -188,6 +219,10 @@ &r_pio {
*/
};
+&r_pwm {
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
--
2.27.0