Issue with Running LM Tool - Error with Several Functions- ArcGIS Pro 3.5.3

[Arvind Pandey]

Hello Linkage Mapper Community,

I am encountering an issue while using the LM Tool. The "Build Network" and "Map Linkages" functions work smoothly, but all other tools are returning errors. I have attached a screenshot of the error message for reference.

Could anyone please assist me in resolving this issue?

Thank you in advance for your help!

Best regards,

[John Gallo]

Hello Arvund,

Please send me directly the log file for the successful "Build network and Map Linkages" run, and the log file for the errant Barrier Mapper (and others) runs.

If the error is something applicable to others and not specific to your case lets circle back and report out to the community.

Thanks,

John

--
You received this message because you are subscribed to the Google Groups "Linkage Mapper" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linkage-mappe...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/linkage-mapper/060355d3-8a34-4828-bfdb-8cc14ee2e1c5n%40googlegroups.com.

--

John A. Gallo, Ph.D.

Project Director, LinkageMapper.org

Associate, Conservation Biology Institute

Principal, John Gallo, Conservation Services

[Arvind Pandey]

Hello John,
I am sharing the log file. Kindly see the attachment.

To view this discussion visit https://groups.google.com/d/msgid/linkage-mapper/CAEUWjEu_mAQZ0%3DoCdzS_%3DxvG6_vn_o5tdeBjCU9kpV%2BgisbGgg%40mail.gmail.com.

--

Best regards,

Arvind Pandey,

Expert- Remote Sensing and GIS

Global Tiger Forum (GTF),

E 18, First Floor, East of Kailash,

New Delhi - 110065, India.

Website | Twitter | Facebook | YouTube

--------------------------------------------------------------------------------------------------------------

P Please do not print this e-mail unless it is absolutely necessary. Think about the environment before printing.

[Arvind Pandey]

2 more file with 100m resolution for test

[Arvind Pandey]

Hello John

Is there any update on this? 

Best regards,

Arvind Pandey,

--------------------------------------------------------------------------------------------------------------

P Please do not print this e-mail unless it is absolutely necessary. Think about the environment before printing.

[John Gallo]

Hello Arvund,

My memory is such that the Min_radius + N(Radius_Step) = Max_Radius  Needs to be true for N being a whole number.

Hence, for your 30 m run, you used:

MIN_RADIUS       100
MAX_RADIUS       500
RADIUS_STEP      300

So either change radius step from 300 to 200 OR change Max_radius from 500 to 700 and see if that works?

In both of these cases N = 2 solves for max radius.

I might be imagining this, but that is the first thing to try.

To be sure, I would start with a fresh directory and a fresh run.  But if processing time is tight, you can try to save a step and try this on your current directory...

Please let me or us know how it goes?  (To reply to me only, you need to change the default recipient.)

Thanks,

John

To view this discussion visit https://groups.google.com/d/msgid/linkage-mapper/CAB%3D_ZfPJytBN%3Dk0kTQbFTtRm1TAA_EU6ZEZ718sLRxh4JzTJng%40mail.gmail.com.