The information contained in this electronic communication is intended solely for the individual(s) or entity to which it is addressed. It may contain proprietary, confidential and/or legally privileged information. Any review, retransmission, dissemination, printing, copying or other use of, or taking any action in reliance on the contents of this information by person(s) or entities other than the intended recipient is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us by responding to this email or telephone and immediately and permanently delete all copies of this message and any attachments from your system(s). The contents of this message do not necessarily represent the views or policies of BITS Pilani.
--
You received this message because you are subscribed to the Google Groups "the labscript suite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to labscriptsuit...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/labscriptsuite/e25a0933-63ed-4415-aeed-acaff13a5d81n%40googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/labscriptsuite/9e9a54b5-c695-4f47-91e3-3d9fadcc3571n%40googlegroups.com.
Hi Chris,Thank you for the suggestion. I tried it, but unfortunately I am getting the same error. I dug up a little bit on this and I have two questions to ask:1.) Do I need to explicitly configure my line1/port0 as a PFI channel on NI MAX, as you can see on the pinout page it says configure it to PFI or D I/O2.) On googling the error, the solution on the official page mentions that the sample clock might not be configured correctly, can it be because I didn't define acquisition rate parameter to initialize PrawnBlaster?This is just a guess, but as you can see in the error (attached) it uses the AO_task's WriteAnalogF64, however our PXIe doesn't have an analog input channel is that a problem? Is it possible to use a DO_task to write into the channel instead (sorry if it doesn't make sense, I am still understanding the workflow of the suite).As a matter of fact, if I use NI MAX UI to acquire my pseduoclock signal it works perfectly fine (same output as seen on runviewer).Best,Parth
To view this discussion on the web, visit https://groups.google.com/d/msgid/labscriptsuite/76cdbdd7-5270-460c-8d67-0e70a88af355n%40googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/labscriptsuite/f485fb2f-58b6-45c9-85a3-af0f2092992cn%40googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/labscriptsuite/aaa5d7c4-d776-4792-8531-c18fdf16a3e9n%40googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/labscriptsuite/e9599c8f-d7f9-45a7-a729-71505e12c832n%40googlegroups.com.