Conditional Parameters not working in klish 2.2.5

[Amol Lad]

Hi,

I'm trying the reference ping.xml which comes in klish package. As you can see the parameters "resolve", "repeat" and "size" are visible even for "arp" proto. The XML definition has test='"${proto}"!="arp"' for these commands. Please advise if I'm doing something wrong? Do we need to enable any compiler switch to enable "test=" directive?

Thanks in advance

> ping arp 192.168.4.1 ?
  source            Source IP-address (ip) or interface (ip and arp)
  repeat            Requests to send count, default is 5
  resolve           Resolve names
  broadcast         Ping broadcast address
  size              Packet size
  interval          The time interval between packets, default is 1
  flood             Flood ping
  duplicate-detect  Duplicate address detection mode
  <cr>

...

         <PARAM name="size"
                        test='"${proto}"!="arp"'
                        help="Packet size"
                        optional="true"
                        mode="subcommand"
                        ptype="SUBCOMMAND">
                        <PARAM name="psize"
                                help="Number of data bytes to send"
                                ptype="UINT"/>
                </PARAM>

 ...

Thanks

[serj.kalichev]

hi

Try spaces around !=.

test='"${proto}" != "arp"'

26.07.2023 10:41, Amol Lad пишет:

--
You received this message because you are subscribed to the Google Groups "klish" group.
To unsubscribe from this group and stop receiving emails from it, send an email to klish+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/klish/de515fc8-1b8b-496d-b69c-03164f39abdfn%40googlegroups.com.

[Amol Lad]

Thanks !! It worked!!

You received this message because you are subscribed to a topic in the Google Groups "klish" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/klish/IsHurnFW6PA/unsubscribe.
To unsubscribe from this group and all its topics, send an email to klish+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/klish/19fd9e51-a5ee-ca4c-de3e-d8a0552edef0%40gmail.com.

[Amol Lad]

Hello Serj,

Can I use the "test=" condition in the COMMAND definition as well so my commands can be conditional (based on viewid for example) or it only applies to parameters?

Thanks

[serj.kalichev]

No, COMMAND has no "test" attribute

27.07.2023 04:09, Amol Lad пишет:

To view this discussion on the web visit https://groups.google.com/d/msgid/klish/6cf134d2-c280-4e43-83f4-094d0b3352e4n%40googlegroups.com.