shows mux not connected from 2nd transaction.

[pks!!@]

Hi,

Here I am using mux-channel.xml as per jpos guideline & working fine but, when in increases from <reconnect-delay>10000</reconnect-delay> to <reconnect-delay>3600000</reconnect-delay>. It shows mux not connected start from 2nd transaction, only 1st transaction succeed.

Please point out me on missing configuration by me.

Thanks & Regards

pks

[Alejandro Revilla]

You are telling the channel adaptor that in case of a connection failure, you want it to *wait for an hour* before attempting a reconnection.

You want a small reconnect-delay, we typically use 1 or 10 seconds.

--

@apr

--
--
jPOS is licensed under AGPL - free for community usage for your open-source project. Licenses are also available for commercial usage. Please support jPOS, contact: sa...@jpos.org
---
You received this message because you are subscribed to the Google Groups "jPOS Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jpos-users+unsubscribe@googlegroups.com.
To post to this group, send email to jpos-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jpos-users/4de7e4cc-4895-4b86-afac-8630999e66f5%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.