Good day
I am trying to setup a windows slave, but keep getting this error
I tried to solve it by setting “TCP port for inbound agents” to a specific port, but that is not helping.
Any suggestions?
Regards
Anetta
--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/c19448de-c6a6-4c0d-a69d-ff1c918d5ae9%40googlegroups.com.
Emilio Escobar
Software Engineer
CloudBees, Inc.
E: eescoba...@cloudbees.com
Skype: escoem
Hi,It seems that you cannot reach 10.17.23.30 (port:39677) from the slave host. You need to check that before. Also seems to be a random port (configured in the master at Manage Jenkins / Configure Global Security). You probably prefer to use a fixed one (choosing one port like 50000) and opening it in your firewalls.Regards.
On Thu, Aug 29, 2019 at 10:07 AM Anetta van der Walt <anetta...@gmail.com> wrote:
--Good day
I am trying to setup a windows slave, but keep getting this error
I tried to solve it by setting “TCP port for inbound agents” to a specific port, but that is not helping.
Any suggestions?
Regards
Anetta
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkins...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/c19448de-c6a6-4c0d-a69d-ff1c918d5ae9%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/d33847c8-f990-483a-bedf-b5a40f7af523%40googlegroups.com.