[JIRA] (JENKINS-49631) git-plugin setup fails

[francesco.labate@external.thalesaleniaspace.com (JIRA)]

francesco labate created an issue

Jenkins / JENKINS-49631 git-plugin setup fails Issue Type: Bug Assignee: Mark Waite Components: git-plugin Created: 2018-02-19 16:11 Environment: Jenkins ver. 2.46.2 Git client plugin 2.7.1 Git plugin 3.7.0 and all related dependencies have been successfully installed Git version on the RedHat node is 2.12.2 Bitbucket v4.14.2 Priority: Major Reporter: francesco labate When setting in Jenkins, into Job->Configuration->SourceCodeManagement->Git->RepositoryURL the following line: ssh://g...@myserver.mydomain:port.myrepository.git I have following error displayed below immediatly in red by the Jenkins Git Plugin: Failed to connect to repository : Error performing command: git ls-remote -h ssh://g...@myserver.mydomain:port.myrepository.git HEAD The git.exe ls-remote <repo url> command also works correctly from git bash of the node and Git is in the path and its path is specified into tools in the node configuration; besides my permissions are set correctly and the clone of this repository works correctly so, it should be a bug with the Git Plugin. Add Comment

This message was sent by Atlassian JIRA (v7.3.0#73011-sha1:3c73d0e)

[mark.earl.waite@gmail.com (JIRA)]

Mark Waite assigned an issue to Unassigned

Jenkins / JENKINS-49631 git-plugin setup fails

Change By: Mark Waite Assignee: Mark Waite

Add Comment

[mark.earl.waite@gmail.com (JIRA)]

Mark Waite commented on JENKINS-49631

Re: git-plugin setup fails As far as I can tell, that is not a valid URL for a git repository that uses SSH protocol. You reported the repository URL as: ssh://g...@myserver.mydomain:port.myrepository.git The correct URL would be: ssh://g...@myserver.mydomain:port/myrepository.git

Add Comment

[francesco.labate@external.thalesaleniaspace.com (JIRA)]

francesco labate updated an issue

Jenkins / JENKINS-49631 git-plugin setup fails

Change By: francesco labate Priority: Major Critical

Add Comment

[francesco.labate@external.thalesaleniaspace.com (JIRA)]

francesco labate commented on JENKINS-49631

Re: git-plugin setup fails yes, you are right, this is what I used: ssh://g...@myserver.mydomain:port/myrepository.git and the problem is the one described in this ticket.

Add Comment

[francesco.labate@external.thalesaleniaspace.com (JIRA)]

francesco labate updated an issue

Jenkins / JENKINS-49631 git-plugin setup fails

Change By: francesco labate Environment:

Jenkins ver. 2.46.2 Git client plugin 2.7.1 Git plugin 3.7.0

and all related dependencies have been successfully installed as per attached screenshot.

Git version on the RedHat node is 2.12.2 Bitbucket v4.14.2

Add Comment

[francesco.labate@external.thalesaleniaspace.com (JIRA)]

francesco labate updated an issue

Jenkins / JENKINS-49631 git-plugin setup fails

Change By: francesco labate Attachment: installed git plugins.jpg

Add Comment

[mark.earl.waite@gmail.com (JIRA)]

Mark Waite commented on JENKINS-49631

Re: git-plugin setup fails It is quite unlikely that this is a bug in the git plugin. There are 130 000+ installations of the git plugin. It is more likely that there is a problem in your local configuration. Diagnosing your configuration is best done through channels other than a bug report. Please use the chat system, or the Jenkins users mailing list rather than the bug tracker. When you begin that discussion on one of those other channels, you'll have more people who might be able to help and a better chance of reaching an answer. They will probably ask for information like: What form of private key credential are you using with that ssh URL? Confirm that you are not attempting to use a username/password credential with that ssh URL When you say "git.exe" in your question, are you referring to a Windows agent or something different? Is there any other message in the output besides "Failed to connect to repository"? If you save that job and run the job, what is the output of the job?

Add Comment

[mark.earl.waite@gmail.com (JIRA)]

Mark Waite resolved as Not A Defect

Jenkins / JENKINS-49631 git-plugin setup fails

Change By: Mark Waite Status: Open Resolved Resolution: Not A Defect

Add Comment

[mark.earl.waite@gmail.com (JIRA)]

Mark Waite edited a comment on JENKINS-49631

Re: git-plugin setup fails

It is quite unlikely that this is a bug in the git plugin.  There are 130 000+ installations of the git plugin.  It is more likely that there is a problem in your local configuration. Diagnosing your configuration is best done through channels other than a bug report.  Please use the chat system, or the Jenkins users mailing list rather than the bug tracker. When you begin that discussion on one of those other channels, you'll have more people who might be able to help and a better chance of reaching an answer. They will probably ask for information like:

* What form of private key credential are you using with that ssh URL? * Confirm that you are not attempting to use a username/password credential with that ssh URL * When you say "git.exe" in your question, are you referring to a Windows agent or something different? * Is there any other message in the output besides "Failed to connect to repository"? * If you save that job and run the job, what is the output of the job? If you can provide sufficient configuration instructions that others can duplicate your configuration and see the failure, then a bug report is the correct approach.

Add Comment

[francesco.labate@external.thalesaleniaspace.com (JIRA)]

francesco labate commented on JENKINS-49631

Re: git-plugin setup fails Mark, I reopen the issue as I am available to provide sufficient configuration instructions to allow others to reproduce the issue, ask me the info you still need please, I start answering your questions: 1) there is a mistake in what I wrote in the bug description: from the windows server which guests Jenkins using bash is possible to clone the repository; it is also possible from the node Linux RH using git 2.12.2 command lline. 2) I am using in both cases a couple of private/pubblic ssh keys and they work. 3) there is no other message in the output; 4) the log of the console is attached, apparently it works.

Add Comment

[francesco.labate@external.thalesaleniaspace.com (JIRA)]

francesco labate reopened an issue

Please let me know which information do you need to reproduce and debug the issue and i will provide you.

Jenkins / JENKINS-49631 git-plugin setup fails

Change By: francesco labate Resolution: Not A Defect Status: Resolved Reopened

Add Comment

[francesco.labate@external.thalesaleniaspace.com (JIRA)]

francesco labate updated an issue

Jenkins / JENKINS-49631 git-plugin setup fails

Change By: francesco labate Attachment: Output Console.txt

Add Comment

[francesco.labate@external.thalesaleniaspace.com (JIRA)]

francesco labate updated an issue

Jenkins / JENKINS-49631 git-plugin setup fails

Change By: francesco labate Priority: Critical Major

Add Comment

[francesco.labate@external.thalesaleniaspace.com (JIRA)]

francesco labate commented on JENKINS-49631

Re: git-plugin setup fails Further details about the ssh-key, it has been generated using the command: ssh-keygen -t rsa and enabling the flag: PubkeyAuthentication yes in both files below: /etc/ssh/sshd_config /etc/ssh/config then restarting the service jenkins. As said this key works well using the git clone command from the node.

Add Comment

[mark.earl.waite@gmail.com (JIRA)]

Mark Waite resolved as Not A Defect

Closing. Not a defect. User configuration error that needs to be investigated somewhere other than a bug report.

Jenkins / JENKINS-49631 git-plugin setup fails

Change By: Mark Waite Status: Reopened Resolved Resolution: Not A Defect

Add Comment

[mark.earl.waite@gmail.com (JIRA)]

Mark Waite closed an issue as Not A Defect

Jenkins / JENKINS-49631 git-plugin setup fails

Change By: Mark Waite Status: Resolved Closed

Add Comment

This message was sent by Atlassian Jira (v7.13.6#713006-sha1:cc4451f)