Atmega programming

[hans]

Hello all,
Another question from an old man.
  Years ago I made a device that works with an atmel 328. I have the hex file and I could set the fuses with the program PONYprog. I made a small circuit for charging. That combination worked fine on my Windows XP, but not on my current Windows 10. The case is also no longer supported by the builders of Pony.
I have now purchased a programmer USBasp and the program Microchip Studio. Unfortunately, getting the case to work for me is very complicated. My question :
Does anyone of you have experience with this and where can I find a step by step description.
regards
Hans

[vasi vasi]

Fast answer, inside LunaAVR product (Luna Studio for AVR), you have a avrdude graphical interface...

http://avr.myluna.de/

Also, here you have a GUI for avrdude (you can use an Arduino as an ISP programmer - it is a ino sketch delivered with arduino)

https://github.com/ZakKemble/AVRDUDESS

Video tutorial as how you use an Arduino as a programmer:

https://www.youtube.com/watch?v=muP1dp73Mdg

[vasi vasi]

https://adduino.com/upload-hex-file-on-arduino-using-avrdude-programming-avr-boards/

--

Vasi

[hans]

Hi Vasi,

I dont have an Arduino and the Luna Studio downloaded reports errors. I'll try to find out more.

regards

Hans

Op woensdag 21 september 2022 om 18:02:45 UTC+2 schreef funlw65(Vasi):

[PtrZet]

 Hi Hans

The Atmega328 is made by Atmel.

Arduino has boards with the Atmega328..

Maybe that forum can help you.

Kindly regards,

Peter

 

Verzonden vanuit Mail voor Windows

--
You received this message because you are subscribed to the Google Groups "jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jallib+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/53a2512a-db23-4541-8883-102234a7206bn%40googlegroups.com.

 

[vsurducan]

One old laptop with win7 + one old and well known programmer?

Or pickit4 and a bunch of money.

--

You received this message because you are subscribed to the Google Groups "jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jallib+un...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/a45fc226-5504-45a0-b198-4e7823677e53n%40googlegroups.com.

[hans]

I've been honoring an XP and the ancient Pony program for a long time, but the XP has given up the ghost. The Lunaavr program always indicates that it cannot find an avr config while everything is in the total folder. According to the builder, he has no more time to make an update... so

Op donderdag 22 september 2022 om 06:18:29 UTC+2 schreef vasile:

[vsurducan]

AFIK pony works ok on Win7. Serial programmer which steals energy from RS232 port works OK on any computer with true RS232 interface. Perhaps an old $30 single core computer?

To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/df146901-ec5a-43d8-83bd-3d1d92e617d1n%40googlegroups.com.

[vasi vasi]

If you can borrow an Arduino or make an effort to buy one, it will serve you well as a programmer, not only for AVRs, but also for the most recent PICs (not all but a huge chunk of new ones, starting from pic12 to pic18) and you can use it from Linux. Is even simpler than using a pickit clone...

https://github.com/cjacker/a-p-prog

This project could even be maintained by Jallib :P

To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/CAM%2Bj4qs%2BC2m7KbU3tS0fuUs3_tk8FqRH8mDN5o3zW8jj56brJA%40mail.gmail.com.

--

Vasi

[vasi vasi]

JUST remembered... avrdude has suport for pickit2 programmer that can be used to program AVR's...

--

Vasi

[vasi vasi]

And here is an USBasp GUI that can be compiled for windows...

https://github.com/excursively/USBasp_GUI

--

Vasi

[hans]

Hi Vasi,
I went back to an old windows 7 PC and that solved this problem with Pony.
regards
Hans

Op zaterdag 15 oktober 2022 om 15:23:41 UTC+2 schreef funlw65(Vasi):