Intermediate results JAL library for the ILI9341 display

[rob...@hotmail.com]

Hello JAL users,

Just want to share the intermediate results of the JAL library for the ILI9341 display.

It is still work in progress and the recording is not always that clear. At the end a small picture is shown but it is not visible. It is not correct anyway buy I do not yet know if that is the picture or the library..

See: https://youtu.be/0yT5pA8968I

I only created the graphics part, fonts do not yet work and I need to add more features of the display. After that I will add the library to Jallib and will see if I can implement the touch functionality which this version of the display also has. And since the display has a slot for an SD card I also want to make a sample program that copies pictures form the SD card to the display.

Kind regards,

Rob

[Mike]

That looks good Rob.

Regards,

Mike

[vsurducan]

Veeeery nice Rob!

I need to look in my monkey box  someday if there is any display with this driver...

Usually a TFT display is eating a lot of resources, so it has to display something very beautiful to be worth the use.

Congrats!

--
You received this message because you are subscribed to the Google Groups "jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jallib+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/bacbb5a3-843d-4f9d-90c9-4ce5374dc9e2n%40googlegroups.com.

[rob...@hotmail.com]

Hi Mike, Vasile,

Thanks. The next step. I managed to copy a RGB 565 pictures to the display. The pictures are stored on the SD card that can be plugged into the display. I used Matt's sd_card_fat32 sample program to read the pictures from the SD card.

Attached you see the JAL logo and a picture I took during a holiday which I converted to the format the display understands. Taken with my smart phone so do not look at the picture quality. I also had to resize the photo because it was too big for this post.

Kind regards,

Rob