[PATCH 1/4] recipes-kernel: Add support to build pine64plus kernel

[Vijai Kumar K]

Add defconfig for pine64-plus development board.

Signed-off-by: Vijai Kumar K <vijaikumar....@gmail.com>
---
.../linux/files/pine64-plus_defconfig_5.4 | 849 ++++++++++++++++++
recipes-kernel/linux/linux-jailhouse_5.4.inc | 1 +
2 files changed, 850 insertions(+)
create mode 100644 recipes-kernel/linux/files/pine64-plus_defconfig_5.4

diff --git a/recipes-kernel/linux/files/pine64-plus_defconfig_5.4 b/recipes-kernel/linux/files/pine64-plus_defconfig_5.4
new file mode 100644
index 0000000..44a01f6
--- /dev/null
+++ b/recipes-kernel/linux/files/pine64-plus_defconfig_5.4
@@ -0,0 +1,849 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_ARCH_AGILEX=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_BCM_IPROC=y
+CONFIG_ARCH_BERLIN=y
+CONFIG_ARCH_BRCMSTB=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_K3=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_LG1K=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_MESON=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_RENESAS=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_STRATIX10=y
+CONFIG_ARCH_SYNQUACER=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_SPRD=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_THUNDER2=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZX=y
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_SCHED_MC=y
+CONFIG_NUMA=y
+CONFIG_SECCOMP=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_XEN=y
+CONFIG_COMPAT=y
+CONFIG_RANDOMIZE_BASE=y
+CONFIG_HIBERNATION=y
+CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_ARM_PSCI_CPUIDLE=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_ACPI_CPPC_CPUFREQ=m
+CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
+CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ARM_IMX_CPUFREQ_DT=m
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
+CONFIG_ARM_TEGRA186_CPUFREQ=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_INTEL_STRATIX10_SERVICE=y
+CONFIG_EFI_CAPSULE_LOADER=y
+CONFIG_IMX_SCU=y
+CONFIG_IMX_SCU_PD=y
+CONFIG_ACPI=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+CONFIG_ACPI_APEI_EINJ=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=y
+CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SHA512_ARM64_CE=m
+CONFIG_CRYPTO_SHA3_ARM64=m
+CONFIG_CRYPTO_SM3_ARM64_CE=m
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRYPTO_AES_ARM64_BS=m
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_KSM=y
+CONFIG_MEMORY_FAILURE=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IPV6=m
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+CONFIG_QRTR=m
+CONFIG_QRTR_SMD=m
+CONFIG_QRTR_TUN=m
+CONFIG_BPF_JIT=y
+CONFIG_BT=m
+CONFIG_BT_HIDP=m
+# CONFIG_BT_HS is not set
+# CONFIG_BT_LE is not set
+CONFIG_BT_LEDS=y
+# CONFIG_BT_DEBUGFS is not set
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_LEDS=y
+CONFIG_RFKILL=m
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_IOV=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PCI_TEGRA=y
+CONFIG_PCIE_RCAR=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
+CONFIG_PCIE_ALTERA=y
+CONFIG_PCIE_ALTERA_MSI=y
+CONFIG_PCI_HOST_THUNDER_PEM=y
+CONFIG_PCI_HOST_THUNDER_ECAM=y
+CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
+CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCIE_KIRIN=y
+CONFIG_PCIE_HISI_STB=y
+CONFIG_PCIE_TEGRA194=m
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
+CONFIG_HISILICON_LPC=y
+CONFIG_SIMPLE_PM_BUS=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_DENALI_DT=y
+CONFIG_MTD_NAND_MARVELL=y
+CONFIG_MTD_NAND_QCOM=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_NVME=m
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT25=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_HISI_SAS=y
+CONFIG_SCSI_HISI_SAS_PCI=y
+CONFIG_SCSI_MPT3SAS=m
+CONFIG_SCSI_UFSHCD=y
+CONFIG_SCSI_UFSHCD_PLATFORM=y
+CONFIG_SCSI_UFS_QCOM=m
+CONFIG_SCSI_UFS_HISI=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_CEVA=y
+CONFIG_AHCI_MVEBU=y
+CONFIG_AHCI_XGENE=y
+CONFIG_AHCI_QORIQ=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_RCAR=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_NETDEVICES=y
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_TUN=y
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=y
+CONFIG_AMD_XGBE=y
+CONFIG_NET_XGENE=y
+CONFIG_ATL1C=m
+CONFIG_BNX2X=m
+CONFIG_MACB=y
+CONFIG_THUNDER_NIC_PF=y
+CONFIG_FEC=y
+CONFIG_HIX5HD2_GMAC=y
+CONFIG_HNS_DSAF=y
+CONFIG_HNS_ENET=y
+CONFIG_HNS3=y
+CONFIG_HNS3_HCLGE=y
+CONFIG_HNS3_ENET=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGBVF=y
+CONFIG_MVNETA=y
+CONFIG_MVPP2=y
+CONFIG_SKY2=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX5_CORE=m
+CONFIG_MLX5_CORE_EN=y
+CONFIG_QCOM_EMAC=m
+CONFIG_RAVB=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_SNI_AVE=y
+CONFIG_SNI_NETSEC=y
+CONFIG_STMMAC_ETH=m
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_AT803X_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_MARVELL_10G_PHY=m
+CONFIG_MESON_GXL_PHY=m
+CONFIG_MICREL_PHY=y
+CONFIG_REALTEK_PHY=m
+CONFIG_ROCKCHIP_PHY=y
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_LAN78XX=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_ATH10K=m
+CONFIG_ATH10K_PCI=m
+CONFIG_BRCMFMAC=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_ADC=m
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_SNVS_PWRKEY=m
+CONFIG_KEYBOARD_CROS_EC=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PM8941_PWRKEY=y
+CONFIG_INPUT_HISI_POWERKEY=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_BCM2835AUX=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_OMAP=y
+CONFIG_SERIAL_8250_MT6577=y
+CONFIG_SERIAL_8250_UNIPHIER=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+CONFIG_SERIAL_TEGRA_TCU=y
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_SERIAL_QCOM_GENI=y
+CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_IPMI_HANDLER=m
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C_INFINEON=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_BCM2835=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_IMX=y
+CONFIG_I2C_IMX_LPI2C=y
+CONFIG_I2C_MESON=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_PXA=y
+CONFIG_I2C_QCOM_GENI=m
+CONFIG_I2C_QUP=y
+CONFIG_I2C_RK3X=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_I2C_TEGRA=y
+CONFIG_I2C_UNIPHIER_F=y
+CONFIG_I2C_RCAR=y
+CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_SPI=y
+CONFIG_SPI_ARMADA_3700=y
+CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_NXP_FLEXSPI=y
+CONFIG_SPI_IMX=m
+CONFIG_SPI_MESON_SPICC=m
+CONFIG_SPI_MESON_SPIFC=m
+CONFIG_SPI_ORION=y
+CONFIG_SPI_PL022=y
+CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_QUP=y
+CONFIG_SPI_S3C64XX=y
+CONFIG_SPI_SUN6I=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPMI=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_IMX8MM=y
+CONFIG_PINCTRL_IMX8MN=y
+CONFIG_PINCTRL_IMX8MQ=y
+CONFIG_PINCTRL_IMX8QXP=y
+CONFIG_PINCTRL_IPQ8074=y
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8994=y
+CONFIG_PINCTRL_MSM8996=y
+CONFIG_PINCTRL_MSM8998=y
+CONFIG_PINCTRL_QCS404=y
+CONFIG_PINCTRL_QDF2XXX=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_SDM845=y
+CONFIG_PINCTRL_SM8150=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_MB86S7X=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_RCAR=y
+CONFIG_GPIO_UNIPHIER=y
+CONFIG_GPIO_XGENE=y
+CONFIG_GPIO_XGENE_SB=y
+CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_MAX77620=y
+CONFIG_POWER_AVS=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_RESET_XGENE=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_SENSORS_ARM_SCPI=y
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_PWM_FAN=m
+CONFIG_SENSORS_RASPBERRYPI_HWMON=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_INA3221=m
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_CPU_THERMAL=y
+CONFIG_THERMAL_EMULATION=y
+CONFIG_QORIQ_THERMAL=m
+CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_RCAR_THERMAL=y
+CONFIG_RCAR_GEN3_THERMAL=y
+CONFIG_ARMADA_THERMAL=y
+CONFIG_BCM2835_THERMAL=m
+CONFIG_BRCMSTB_THERMAL=m
+CONFIG_EXYNOS_THERMAL=y
+CONFIG_TEGRA_BPMP_THERMAL=m
+CONFIG_QCOM_TSENS=y
+CONFIG_UNIPHIER_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_S3C2410_WATCHDOG=y
+CONFIG_DW_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=m
+CONFIG_IMX2_WDT=y
+CONFIG_IMX_SC_WDT=m
+CONFIG_MESON_GXBB_WATCHDOG=m
+CONFIG_MESON_WATCHDOG=m
+CONFIG_RENESAS_WDT=y
+CONFIG_UNIPHIER_WATCHDOG=y
+CONFIG_BCM2835_WDT=y
+CONFIG_MFD_ALTERA_SYSMGR=y
+CONFIG_MFD_BD9571MWV=y
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_AXP20X_RSB=y
+CONFIG_MFD_EXYNOS_LPASS=m
+CONFIG_MFD_HI6421_PMIC=y
+CONFIG_MFD_HI655X_PMIC=y
+CONFIG_MFD_MAX77620=y
+CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_RK808=y
+CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_ROHM_BD718XX=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_BD718XX=y
+CONFIG_REGULATOR_BD9571MWV=y
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_HI6421V530=y
+CONFIG_REGULATOR_HI655X=y
+CONFIG_REGULATOR_MAX77620=y
+CONFIG_REGULATOR_MAX8973=y
+CONFIG_REGULATOR_PFUZE100=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_RPMH=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
+CONFIG_REGULATOR_RK808=y
+CONFIG_REGULATOR_S2MPS11=y
+CONFIG_REGULATOR_VCTRL=m
+CONFIG_RC_CORE=m
+CONFIG_RC_DECODERS=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_MESON=m
+CONFIG_IR_SUNXI=m
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+# CONFIG_DVB_NET is not set
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_SUN6I_CSI=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
+CONFIG_VIDEO_RENESAS_FCP=m
+CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_DRM=m
+CONFIG_DRM_I2C_NXP_TDA998X=m
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_EXYNOS=m
+CONFIG_DRM_EXYNOS5433_DECON=y
+CONFIG_DRM_EXYNOS7_DECON=y
+CONFIG_DRM_EXYNOS_DSI=y
+# CONFIG_DRM_EXYNOS_DP is not set
+CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_EXYNOS_MIC=y
+CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_ANALOGIX_DP=y
+CONFIG_ROCKCHIP_CDN_DP=y
+CONFIG_ROCKCHIP_DW_HDMI=y
+CONFIG_ROCKCHIP_DW_MIPI_DSI=y
+CONFIG_ROCKCHIP_INNO_HDMI=y
+CONFIG_DRM_RCAR_DU=m
+CONFIG_DRM_SUN4I=m
+CONFIG_DRM_SUN8I_DW_HDMI=m
+CONFIG_DRM_SUN8I_MIXER=m
+CONFIG_DRM_MSM=m
+CONFIG_DRM_TEGRA=m
+CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_SII902X=m
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_VC4=m
+CONFIG_DRM_ETNAVIV=m
+CONFIG_DRM_HISI_HIBMC=m
+CONFIG_DRM_HISI_KIRIN=m
+CONFIG_DRM_MESON=m
+CONFIG_DRM_PL111=m
+CONFIG_DRM_LIMA=m
+CONFIG_DRM_PANFROST=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_EFI=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_TEGRA=m
+CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_SOC=y
+CONFIG_SND_BCM2835_SOC_I2S=m
+CONFIG_SND_MESON_AXG_SOUND_CARD=m
+CONFIG_SND_SOC_ROCKCHIP=m
+CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
+CONFIG_SND_SOC_ROCKCHIP_RT5645=m
+CONFIG_SND_SOC_RK3399_GRU_SOUND=m
+CONFIG_SND_SOC_SAMSUNG=y
+CONFIG_SND_SOC_RCAR=m
+CONFIG_SND_SUN4I_SPDIF=m
+CONFIG_SND_SOC_AK4613=m
+CONFIG_SND_SOC_ES7134=m
+CONFIG_SND_SOC_ES7241=m
+CONFIG_SND_SOC_PCM3168A_I2C=m
+CONFIG_SND_SOC_TAS571X=m
+CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_AUDIO_GRAPH_CARD=m
+CONFIG_I2C_HID=m
+CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_TEGRA=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_EXYNOS=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_RENESAS_USBHS=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_RENESAS_USB3=m
+CONFIG_TYPEC=m
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_CADENCE=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_SDHCI_F_SDH30=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_MMC_SDHCI_MSM=y
+CONFIG_MMC_SPI=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_UNIPHIER=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_HI3798CV200=y
+CONFIG_MMC_DW_K3=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SUNXI=y
+CONFIG_MMC_BCM2835=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGER_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_EDAC=y
+CONFIG_EDAC_GHES=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RK808=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_S5M=y
+CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_CROS_EC=y
+CONFIG_RTC_DRV_S3C=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_SUN6I=y
+CONFIG_RTC_DRV_ARMADA38X=y
+CONFIG_RTC_DRV_TEGRA=y
+CONFIG_RTC_DRV_SNVS=m
+CONFIG_RTC_DRV_IMX_SC=m
+CONFIG_RTC_DRV_XGENE=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2835=m
+CONFIG_DMA_SUN6I=m
+CONFIG_FSL_EDMA=y
+CONFIG_IMX_SDMA=y
+CONFIG_K3_DMA=y
+CONFIG_MV_XOR=y
+CONFIG_MV_XOR_V2=y
+CONFIG_PL330_DMA=y
+CONFIG_TEGRA20_APB_DMA=y
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=y
+CONFIG_QCOM_HIDMA=y
+CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=m
+CONFIG_UIO=y
+CONFIG_UIO_IVSHMEM=y
+CONFIG_VFIO=y
+CONFIG_VFIO_PCI=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_JAILHOUSE_DBGCON=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_MFD_CROS_EC=y
+CONFIG_CROS_EC_I2C=y
+CONFIG_CROS_EC_SPI=y
+CONFIG_COMMON_CLK_RK808=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_CLK_QORIQ=y
+CONFIG_COMMON_CLK_PWM=y
+CONFIG_CLK_RASPBERRYPI=m
+CONFIG_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MN=y
+CONFIG_CLK_IMX8MQ=y
+CONFIG_CLK_IMX8QXP=y
+CONFIG_TI_SCI_CLK=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_A53PLL=y
+CONFIG_QCOM_CLK_APCS_MSM8916=y
+CONFIG_QCOM_CLK_SMD_RPM=y
+CONFIG_QCOM_CLK_RPMH=y
+CONFIG_IPQ_GCC_8074=y
+CONFIG_MSM_GCC_8916=y
+CONFIG_MSM_GCC_8994=y
+CONFIG_MSM_MMCC_8996=y
+CONFIG_MSM_GCC_8998=y
+CONFIG_QCS_GCC_404=y
+CONFIG_SDM_GCC_845=y
+CONFIG_SM_GCC_8150=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_ARM_MHU=y
+CONFIG_IMX_MBOX=y
+CONFIG_PLATFORM_MHU=y
+CONFIG_BCM2835_MBOX=y
+CONFIG_QCOM_APCS_IPC=y
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_TEGRA_IOMMU_SMMU=y
+CONFIG_ARM_SMMU=y
+CONFIG_ARM_SMMU_V3=y
+CONFIG_QCOM_IOMMU=y
+CONFIG_REMOTEPROC=y
+CONFIG_QCOM_Q6V5_MSS=m
+CONFIG_QCOM_Q6V5_PAS=m
+CONFIG_QCOM_SYSMON=m
+CONFIG_RPMSG_QCOM_GLINK_RPM=y
+CONFIG_RPMSG_QCOM_GLINK_SMEM=m
+CONFIG_RPMSG_QCOM_SMD=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_IMX_SCU_SOC=y
+CONFIG_QCOM_GENI_SE=y
+CONFIG_QCOM_GLINK_SSR=m
+CONFIG_QCOM_RPMH=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_ARCH_R8A774A1=y
+CONFIG_ARCH_R8A774C0=y
+CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_R8A7796=y
+CONFIG_ARCH_R8A77965=y
+CONFIG_ARCH_R8A77970=y
+CONFIG_ARCH_R8A77980=y
+CONFIG_ARCH_R8A77990=y
+CONFIG_ARCH_R8A77995=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+CONFIG_ARCH_TEGRA_186_SOC=y
+CONFIG_ARCH_TEGRA_194_SOC=y
+CONFIG_ARCH_K3_AM6_SOC=y
+CONFIG_ARCH_K3_J721E_SOC=y
+CONFIG_TI_SCI_PM_DOMAINS=y
+CONFIG_EXTCON_USB_GPIO=y
+CONFIG_EXTCON_USBC_CROS_EC=y
+CONFIG_MEMORY=y
+CONFIG_IIO=y
+CONFIG_EXYNOS_ADC=y
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_IIO_CROS_EC_SENSORS_CORE=m
+CONFIG_IIO_CROS_EC_SENSORS=m
+CONFIG_IIO_CROS_EC_LIGHT_PROX=m
+CONFIG_SENSORS_ISL29018=m
+CONFIG_IIO_CROS_EC_BARO=m
+CONFIG_MPL3115=m
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=m
+CONFIG_PWM_CROS_EC=m
+CONFIG_PWM_MESON=m
+CONFIG_PWM_RCAR=m
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_PWM_SAMSUNG=y
+CONFIG_PWM_SUN4I=m
+CONFIG_PWM_TEGRA=m
+CONFIG_RESET_TI_SCI=y
+CONFIG_PHY_XGENE=y
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_HISTB_COMBPHY=y
+CONFIG_PHY_HISI_INNO_USB2=y
+CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_QCOM_QMP=m
+CONFIG_PHY_QCOM_QUSB2=m
+CONFIG_PHY_QCOM_USB_HS=y
+CONFIG_PHY_RCAR_GEN3_PCIE=y
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_RCAR_GEN3_USB3=m
+CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_INNO_HDMI=m
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_PCIE=m
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+CONFIG_PHY_UNIPHIER_USB2=y
+CONFIG_PHY_UNIPHIER_USB3=y
+CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_FSL_IMX8_DDR_PMU=m
+CONFIG_HISI_PMU=y
+CONFIG_QCOM_L2_PMU=y
+CONFIG_QCOM_L3_PMU=y
+CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_NVMEM_IMX_OCOTP_SCU=y
+CONFIG_QCOM_QFPROM=y
+CONFIG_ROCKCHIP_EFUSE=y
+CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_UNIPHIER_EFUSE=y
+CONFIG_MESON_EFUSE=m
+CONFIG_FPGA=y
+CONFIG_FPGA_MGR_STRATIX10_SOC=m
+CONFIG_FPGA_BRIDGE=m
+CONFIG_ALTERA_FREEZE_BRIDGE=m
+CONFIG_FPGA_REGION=m
+CONFIG_OF_FPGA_REGION=m
+CONFIG_TEE=y
+CONFIG_OPTEE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_9P_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CMA_SIZE_MBYTES=32
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_MEMTEST=y
diff --git a/recipes-kernel/linux/linux-jailhouse_5.4.inc b/recipes-kernel/linux/linux-jailhouse_5.4.inc
index a9e75a8..6dbf2a4 100644
--- a/recipes-kernel/linux/linux-jailhouse_5.4.inc
+++ b/recipes-kernel/linux/linux-jailhouse_5.4.inc
@@ -13,6 +13,7 @@ require recipes-kernel/linux/linux-custom.inc

KERNEL_DEFCONFIG = "${DISTRO_ARCH}_defconfig_5.4"
KERNEL_DEFCONFIG_orangepi-zero = "orangepi-zero_defconfig_5.4"
+KERNEL_DEFCONFIG_pine64-plus = "pine64-plus_defconfig_5.4"
KERNEL_DEFCONFIG_rpi4 = "rpi4_defconfig_5.4"

SRC_URI += " \
--
2.17.1

[Vijai Kumar K]

Add support for building pine64-plus u-boot. Use mainline u-boot + ATF.

Build only the necessary envtools. u-boot tools-only build is broken
upstream and hence not supported here.

Signed-off-by: Vijai Kumar K <vijaikumar....@gmail.com>
---

recipes-bsp/u-boot/files/pine64-plus-rules | 32 ++++++++++++++++++
.../u-boot-pine64-plus_2019.10-atf2.2.bb | 33 +++++++++++++++++++
2 files changed, 65 insertions(+)
create mode 100644 recipes-bsp/u-boot/files/pine64-plus-rules
create mode 100644 recipes-bsp/u-boot/u-boot-pine64-plus_2019.10-atf2.2.bb

diff --git a/recipes-bsp/u-boot/files/pine64-plus-rules b/recipes-bsp/u-boot/files/pine64-plus-rules
new file mode 100644
index 0000000..f6340f7
--- /dev/null
+++ b/recipes-bsp/u-boot/files/pine64-plus-rules
@@ -0,0 +1,32 @@
+#!/usr/bin/make -f
+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:
+# Vijai Kumar K <vijaikumar....@gmail.com>
+#
+# SPDX-License-Identifier: MIT
+#
+
+ifneq ($(DEB_BUILD_GNU_TYPE),$(DEB_HOST_GNU_TYPE))
+export CROSS_COMPILE=$(DEB_HOST_GNU_TYPE)-
+SET_CROSS_BUILD_TOOLS=CROSS_BUILD_TOOLS=y
+endif
+PARALLEL_BUILD=-j $(shell echo $$(($$(nproc) * 2)))
+
+override_dh_auto_build:
+ $(MAKE) $(PARALLEL_BUILD) -C ../arm-trusted-firmware-* PLAT=sun50i_a64 bl31
+ $(MAKE) $(PARALLEL_BUILD) $(U_BOOT_CONFIG)
+ BL31=$$(readlink -f ../arm-trusted-firmware-*/build/sun50i_a64/release/bl31.bin) \
+ $(MAKE) $(PARALLEL_BUILD) $(U_BOOT_BIN)
+ $(MAKE) $(PARALLEL_BUILD) $(SET_CROSS_BUILD_TOOLS) NO_SDL=1 envtools
+
+override_dh_auto_install:
+ mv tools/env/lib.a tools/env/libubootenv.a
+
+override_dh_auto_test:
+
+%:
+ CFLAGS= LDFLAGS= dh $@ --parallel
diff --git a/recipes-bsp/u-boot/u-boot-pine64-plus_2019.10-atf2.2.bb b/recipes-bsp/u-boot/u-boot-pine64-plus_2019.10-atf2.2.bb
new file mode 100644
index 0000000..4842ef8
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-pine64-plus_2019.10-atf2.2.bb
@@ -0,0 +1,33 @@
+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:
+# Vijai Kumar K <vijaikumar....@gmail.com>
+#
+# SPDX-License-Identifier: MIT
+#
+
+U_BOOT_PV="${@d.getVar('PV').split('-atf')[0]}"
+ATF_PV="${@d.getVar('PV').split('-atf')[1]}"
+
+require recipes-bsp/u-boot/u-boot-custom.inc
+require recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_${ATF_PV}.inc
+
+SRC_URI += " \
+ ftp://ftp.denx.de/pub/u-boot/u-boot-${U_BOOT_PV}.tar.bz2;name=u-boot \
+ file://pine64-plus-rules \
+ "
+SRC_URI[u-boot.sha256sum] = "8d6d6070739522dd236cba7055b8736bfe92b4fac0ea18ad809829ca79667014"
+
+U_BOOT_CONFIG="pine64_plus_defconfig"
+U_BOOT_BIN="u-boot-sunxi-with-spl.bin"
+
+BUILD_DEPENDS += ", libssl-dev, swig:native, python-dev:native"
+
+S = "${WORKDIR}/u-boot-${U_BOOT_PV}"
+
+do_prepare_build_append() {
+ cp ${WORKDIR}/pine64-plus-rules ${S}/debian/rules
+}
--
2.17.1

[Vijai Kumar K]

Add bash history and dummy postinst script for pine64-plus.

Signed-off-by: Vijai Kumar K <vijaikumar....@gmail.com>
---

.../customizations/files/.bash_history-pine64-plus | 14 ++++++++++++++
.../customizations/files/postinst-pine64-plus | 1 +
2 files changed, 15 insertions(+)
create mode 100644 recipes-core/customizations/files/.bash_history-pine64-plus
create mode 100644 recipes-core/customizations/files/postinst-pine64-plus

diff --git a/recipes-core/customizations/files/.bash_history-pine64-plus b/recipes-core/customizations/files/.bash_history-pine64-plus
new file mode 100644
index 0000000..8e8b246
--- /dev/null
+++ b/recipes-core/customizations/files/.bash_history-pine64-plus
@@ -0,0 +1,14 @@
+jailhouse enable /etc/jailhouse/pine64-plus.cell
+jailhouse console
+jailhouse cell create /etc/jailhouse/pine64-plus-inmate-demo.cell
+jailhouse cell load inmate-demo \
+ /usr/libexec/jailhouse/demos/gic-demo.bin
+jailhouse cell start inmate-demo
+jailhouse cell stats inmate-demo
+jailhouse cell destroy inmate-demo
+jailhouse cell linux /etc/jailhouse/pine64-plus-linux-demo.cell /boot/vmlinuz* \
+ -d /etc/jailhouse/dts/inmate-pine64-plus.dtb \
+ -i /usr/libexec/jailhouse/demos/rootfs.cpio \
+ -c "console=ttyS0,115200 ip=192.168.19.2"
+ssh 192.168.19.2
+jailhouse disable
diff --git a/recipes-core/customizations/files/postinst-pine64-plus b/recipes-core/customizations/files/postinst-pine64-plus
new file mode 100644
index 0000000..2dde661
--- /dev/null
+++ b/recipes-core/customizations/files/postinst-pine64-plus
@@ -0,0 +1 @@
+# Nothing to do
--
2.17.1

[Vijai Kumar K]

- Add the necessary machine, multiconfig and wks file.
- Add entry in images list.

Signed-off-by: Vijai Kumar K <vijaikumar....@gmail.com>
---

conf/machine/pine64-plus.conf | 19 +++++++++++++++++++
.../pine64-plus-jailhouse-demo.conf | 14 ++++++++++++++
images.list | 1 +
wic/pine64-plus.wks | 16 ++++++++++++++++
4 files changed, 50 insertions(+)
create mode 100644 conf/machine/pine64-plus.conf
create mode 100644 conf/multiconfig/pine64-plus-jailhouse-demo.conf
create mode 100644 wic/pine64-plus.wks

diff --git a/conf/machine/pine64-plus.conf b/conf/machine/pine64-plus.conf
new file mode 100644
index 0000000..0949ab4
--- /dev/null
+++ b/conf/machine/pine64-plus.conf
@@ -0,0 +1,19 @@

+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:
+# Vijai Kumar K <vijaikumar....@gmail.com>
+#
+# SPDX-License-Identifier: MIT
+#
+

+DISTRO_ARCH = "arm64"
+
+IMAGE_TYPE = "wic-img"
+IMAGER_INSTALL += "u-boot-pine64-plus"
+IMAGER_BUILD_DEPS += "u-boot-pine64-plus"
+PREFERRED_PROVIDER_u-boot-pine64-plus = "u-boot-pine64-plus"
+
+IMAGE_INSTALL += "u-boot-script"
diff --git a/conf/multiconfig/pine64-plus-jailhouse-demo.conf b/conf/multiconfig/pine64-plus-jailhouse-demo.conf
new file mode 100644
index 0000000..5e66c94
--- /dev/null
+++ b/conf/multiconfig/pine64-plus-jailhouse-demo.conf
@@ -0,0 +1,14 @@

+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:
+# Vijai Kumar K <vijaikumar....@gmail.com>
+#
+# SPDX-License-Identifier: MIT
+#

+#
+MACHINE = "pine64-plus"
+
+DISTRO = "jailhouse-demo"
diff --git a/images.list b/images.list
index 26a802d..b794d85 100644
--- a/images.list
+++ b/images.list
@@ -7,3 +7,4 @@ macchiatobin Marvell MACCHIATObin
hikey620 LeMaker HiKey (Kirin 620 SoC, 2 GB edition)
ultra96 Avnet Ultra96
rpi4 Raspberry Pi 4 (1 GB edition)
+pine64-plus Pine64+ (Allwinner A64, 2GB edition)
diff --git a/wic/pine64-plus.wks b/wic/pine64-plus.wks
new file mode 100644
index 0000000..aacca04
--- /dev/null
+++ b/wic/pine64-plus.wks
@@ -0,0 +1,16 @@

+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:
+# Vijai Kumar K <vijaikumar....@gmail.com>
+#
+# SPDX-License-Identifier: MIT
+#
+

+part u-boot --source rawcopy --sourceparams "file=/usr/lib/u-boot/pine64-plus/u-boot-sunxi-with-spl.bin" --no-table --align 8
+
+part / --source rootfs-u-boot --ondisk mmcblk0 --fstype ext4 --label platform --align 1024
+
+bootloader --append "rootwait mem=1792M"
--
2.17.1

[vijai kumar]

I missed the cover letter for this series.

This series adds support for Pine64-plus board(2GB edition) in jailhouse-images.

The hypervisor side patch for the same is already pushed to the mailing list and is

available here[1].

[1] https://groups.google.com/d/msg/jailhouse-dev/Rn_LBYftSdc/iuG2bQqCBQAJ

Thanks,

Vijai Kumar K

On Thursday, February 13, 2020 at 7:14:44 PM UTC+5:30, vijai kumar wrote:

Add defconfig for pine64-plus development board.

Signed-off-by: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>

[Jan Kiszka]

On 13.02.20 14:44, Vijai Kumar K wrote:
> Add defconfig for pine64-plus development board.
>

Can we add the missing switches to the arm64_defconfig instead? If not,
you would have to provide a different kernel (recipe) for this target,
just like for the rpi4. But I don't think that should be needed.

Jan

Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux

[Jan Kiszka]

On 13.02.20 14:44, Vijai Kumar K wrote:

> Add support for building pine64-plus u-boot. Use mainline u-boot + ATF.
>
> Build only the necessary envtools. u-boot tools-only build is broken
> upstream and hence not supported here.

Actually, there is rarely the need to use self-built tools. Those
provided by Debian prebuilt are generally fine.

Where do those dependencies come from? libssl-dev is understood, but the
others? Just curious.

> +
> +S = "${WORKDIR}/u-boot-${U_BOOT_PV}"
> +
> +do_prepare_build_append() {
> + cp ${WORKDIR}/pine64-plus-rules ${S}/debian/rules
> +}
>

Jan

[Jan Kiszka]

On 13.02.20 14:44, Vijai Kumar K wrote:

Could you add a section to the README as well?

Thanks,

[vijai kumar]

On Thursday, February 13, 2020 at 7:47:34 PM UTC+5:30, Jan Kiszka wrote:

On 13.02.20 14:44, Vijai Kumar K wrote:
> Add support for building pine64-plus u-boot. Use mainline u-boot + ATF.
>
> Build only the necessary envtools. u-boot tools-only build is broken
> upstream and hence not supported here.

Actually, there is rarely the need to use self-built tools. Those
provided by Debian prebuilt are generally fine.

>

> Signed-off-by: Vijai Kumar K <vijaikumar...@gmail.com>

> ---
>   recipes-bsp/u-boot/files/pine64-plus-rules    | 32 ++++++++++++++++++
>   .../u-boot-pine64-plus_2019.10-atf2.2.bb      | 33 +++++++++++++++++++
>   2 files changed, 65 insertions(+)
>   create mode 100644 recipes-bsp/u-boot/files/pine64-plus-rules
>   create mode 100644 recipes-bsp/u-boot/u-boot-pine64-plus_2019.10-atf2.2.bb
>
> diff --git a/recipes-bsp/u-boot/files/pine64-plus-rules b/recipes-bsp/u-boot/files/pine64-plus-rules
> new file mode 100644
> index 0000000..f6340f7
> --- /dev/null
> +++ b/recipes-bsp/u-boot/files/pine64-plus-rules
> @@ -0,0 +1,32 @@
> +#!/usr/bin/make -f
> +#
> +# Jailhouse, a Linux-based partitioning hypervisor
> +#
> +# Copyright (c) Vijai Kumar K, 2020
> +#
> +# Authors:

> +#  Vijai Kumar K <vijaikumar...@gmail.com>

> +#  Vijai Kumar K <vijaikumar...@gmail.com>

> +#
> +# SPDX-License-Identifier: MIT
> +#
> +
> +U_BOOT_PV="${@d.getVar('PV').split('-atf')[0]}"
> +ATF_PV="${@d.getVar('PV').split('-atf')[1]}"
> +
> +require recipes-bsp/u-boot/u-boot-custom.inc
> +require recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_${ATF_PV}.inc
> +
> +SRC_URI += " \
> +    ftp://ftp.denx.de/pub/u-boot/u-boot-${U_BOOT_PV}.tar.bz2;name=u-boot \
> +    file://pine64-plus-rules \
> +    "
> +SRC_URI[u-boot.sha256sum] = "8d6d6070739522dd236cba7055b8736bfe92b4fac0ea18ad809829ca79667014"
> +
> +U_BOOT_CONFIG="pine64_plus_defconfig"
> +U_BOOT_BIN="u-boot-sunxi-with-spl.bin"
> +
> +BUILD_DEPENDS += ", libssl-dev, swig:native, python-dev:native"

Where do those dependencies come from? libssl-dev is understood, but the
others? Just curious.

swig is needed for scripts/dtc/pylibfdt/ which comes as a dependency from binman.

python-dev is not actually needed. I might have introduced it as part of debugging some compilation issue.

I will check and remove it in v2.

[vijai kumar]

On Thursday, February 13, 2020 at 7:49:02 PM UTC+5:30, Jan Kiszka wrote:

On 13.02.20 14:44, Vijai Kumar K wrote:
> - Add the necessary machine, multiconfig and wks file.
> - Add entry in images list.
>

> Signed-off-by: Vijai Kumar K <vijaikumar...@gmail.com>

> ---
>   conf/machine/pine64-plus.conf                 | 19 +++++++++++++++++++
>   .../pine64-plus-jailhouse-demo.conf           | 14 ++++++++++++++
>   images.list                                   |  1 +
>   wic/pine64-plus.wks                           | 16 ++++++++++++++++
>   4 files changed, 50 insertions(+)
>   create mode 100644 conf/machine/pine64-plus.conf
>   create mode 100644 conf/multiconfig/pine64-plus-jailhouse-demo.conf
>   create mode 100644 wic/pine64-plus.wks
>
> diff --git a/conf/machine/pine64-plus.conf b/conf/machine/pine64-plus.conf
> new file mode 100644
> index 0000000..0949ab4
> --- /dev/null
> +++ b/conf/machine/pine64-plus.conf
> @@ -0,0 +1,19 @@
> +#
> +# Jailhouse, a Linux-based partitioning hypervisor
> +#
> +# Copyright (c) Vijai Kumar K, 2020
> +#
> +# Authors:

> +#  Vijai Kumar K <vijaikumar...@gmail.com>

> +#
> +# SPDX-License-Identifier: MIT
> +#
> +
> +DISTRO_ARCH = "arm64"
> +
> +IMAGE_TYPE = "wic-img"
> +IMAGER_INSTALL += "u-boot-pine64-plus"
> +IMAGER_BUILD_DEPS += "u-boot-pine64-plus"
> +PREFERRED_PROVIDER_u-boot-pine64-plus = "u-boot-pine64-plus"
> +
> +IMAGE_INSTALL += "u-boot-script"
> diff --git a/conf/multiconfig/pine64-plus-jailhouse-demo.conf b/conf/multiconfig/pine64-plus-jailhouse-demo.conf
> new file mode 100644
> index 0000000..5e66c94
> --- /dev/null
> +++ b/conf/multiconfig/pine64-plus-jailhouse-demo.conf
> @@ -0,0 +1,14 @@
> +#
> +# Jailhouse, a Linux-based partitioning hypervisor
> +#
> +# Copyright (c) Vijai Kumar K, 2020
> +#
> +# Authors:

> +#  Vijai Kumar K <vijaikumar...@gmail.com>

> +#  Vijai Kumar K <vijaikumar...@gmail.com>

> +#
> +# SPDX-License-Identifier: MIT
> +#
> +
> +part u-boot --source rawcopy --sourceparams "file=/usr/lib/u-boot/pine64-plus/u-boot-sunxi-with-spl.bin" --no-table --align 8
> +
> +part / --source rootfs-u-boot --ondisk mmcblk0 --fstype ext4 --label platform --align 1024
> +
> +bootloader --append "rootwait mem=1792M"
>

Could you add a section to the README as well?

Sure.

[vijai kumar]

On Thursday, February 13, 2020 at 7:40:17 PM UTC+5:30, Jan Kiszka wrote:

On 13.02.20 14:44, Vijai Kumar K wrote:
> Add defconfig for pine64-plus development board.
>

Can we add the missing switches to the arm64_defconfig instead? If not,
you would have to provide a different kernel (recipe) for this target,
just like for the rpi4. But I don't think that should be needed.

Sure. I will try to consolidate it and send it as part of v2.

Jan

> Signed-off-by: Vijai Kumar K <vijaikumar...@gmail.com>

[vijai kumar]

Ok.  The same pylibfdt also needs Python.h header file. So the python-dev.

I will send the v2 in sometime.

[Vijai Kumar K]

Add support for building pine64-plus u-boot. Use mainline u-boot + ATF.

Build only the necessary envtools. u-boot tools-only build is broken
upstream and hence not supported here.

Signed-off-by: Vijai Kumar K <vijaikumar....@gmail.com>

---
recipes-bsp/u-boot/files/pine64-plus-rules | 32 ++++++++++++++++++
.../u-boot-pine64-plus_2019.10-atf2.2.bb | 33 +++++++++++++++++++
2 files changed, 65 insertions(+)
create mode 100644 recipes-bsp/u-boot/files/pine64-plus-rules
create mode 100644 recipes-bsp/u-boot/u-boot-pine64-plus_2019.10-atf2.2.bb

diff --git a/recipes-bsp/u-boot/files/pine64-plus-rules b/recipes-bsp/u-boot/files/pine64-plus-rules
new file mode 100644
index 0000000..f6340f7
--- /dev/null
+++ b/recipes-bsp/u-boot/files/pine64-plus-rules
@@ -0,0 +1,32 @@
+#!/usr/bin/make -f
+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:

+# Vijai Kumar K <vijaikumar....@gmail.com>

+# Vijai Kumar K <vijaikumar....@gmail.com>

+#
+# SPDX-License-Identifier: MIT
+#
+
+U_BOOT_PV="${@d.getVar('PV').split('-atf')[0]}"
+ATF_PV="${@d.getVar('PV').split('-atf')[1]}"
+
+require recipes-bsp/u-boot/u-boot-custom.inc
+require recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_${ATF_PV}.inc
+
+SRC_URI += " \
+ ftp://ftp.denx.de/pub/u-boot/u-boot-${U_BOOT_PV}.tar.bz2;name=u-boot \
+ file://pine64-plus-rules \
+ "
+SRC_URI[u-boot.sha256sum] = "8d6d6070739522dd236cba7055b8736bfe92b4fac0ea18ad809829ca79667014"
+
+U_BOOT_CONFIG="pine64_plus_defconfig"
+U_BOOT_BIN="u-boot-sunxi-with-spl.bin"
+
+BUILD_DEPENDS += ", libssl-dev, swig:native, python-dev:native"

+
+S = "${WORKDIR}/u-boot-${U_BOOT_PV}"
+
+do_prepare_build_append() {
+ cp ${WORKDIR}/pine64-plus-rules ${S}/debian/rules
+}

--
2.17.1

[Vijai Kumar K]

Enable support for pine64-plus ethernet, watchdog, pmic and regulators
in arm64_defconfig_5.4.

Signed-off-by: Vijai Kumar K <vijaikumar....@gmail.com>
---

Changes in v2:
- Consolidated pine64 config changes into arm64_defconfig_5.4 and
removed the extra config.
- Added entry in README

recipes-kernel/linux/files/arm64_defconfig_5.4 | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/recipes-kernel/linux/files/arm64_defconfig_5.4 b/recipes-kernel/linux/files/arm64_defconfig_5.4
index ccfd7d7..a972ad6 100644
--- a/recipes-kernel/linux/files/arm64_defconfig_5.4
+++ b/recipes-kernel/linux/files/arm64_defconfig_5.4
@@ -125,7 +125,6 @@ CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_SUNXI_RSB is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_SPI_NOR=y
@@ -166,6 +165,14 @@ CONFIG_SKY2=y
CONFIG_RAVB=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+# CONFIG_DWMAC_GENERIC is not set
+# CONFIG_DWMAC_IPQ806X is not set
+# CONFIG_DWMAC_MESON is not set
+# CONFIG_DWMAC_QCOM_ETHQOS is not set
+# CONFIG_DWMAC_ROCKCHIP is not set
+# CONFIG_DWMAC_SOCFPGA is not set
+# CONFIG_DWMAC_SUNXI is not set
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
@@ -297,8 +304,10 @@ CONFIG_ARMADA_THERMAL=y
CONFIG_EXYNOS_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
CONFIG_RENESAS_WDT=y
CONFIG_BCM2835_WDT=y
+CONFIG_MFD_AXP20X_RSB=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_SPMI_PMIC=y
@@ -306,6 +315,7 @@ CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI655X=y
--
2.17.1

[Vijai Kumar K]

Add bash history and dummy postinst script for pine64-plus.

Signed-off-by: Vijai Kumar K <vijaikumar....@gmail.com>
---

.../customizations/files/.bash_history-pine64-plus | 14 ++++++++++++++
.../customizations/files/postinst-pine64-plus | 1 +
2 files changed, 15 insertions(+)
create mode 100644 recipes-core/customizations/files/.bash_history-pine64-plus
create mode 100644 recipes-core/customizations/files/postinst-pine64-plus

diff --git a/recipes-core/customizations/files/.bash_history-pine64-plus b/recipes-core/customizations/files/.bash_history-pine64-plus

new file mode 100644

index 0000000..8e8b246
--- /dev/null
+++ b/recipes-core/customizations/files/.bash_history-pine64-plus
@@ -0,0 +1,14 @@
+jailhouse enable /etc/jailhouse/pine64-plus.cell
+jailhouse console
+jailhouse cell create /etc/jailhouse/pine64-plus-inmate-demo.cell
+jailhouse cell load inmate-demo \
+ /usr/libexec/jailhouse/demos/gic-demo.bin
+jailhouse cell start inmate-demo
+jailhouse cell stats inmate-demo
+jailhouse cell destroy inmate-demo
+jailhouse cell linux /etc/jailhouse/pine64-plus-linux-demo.cell /boot/vmlinuz* \
+ -d /etc/jailhouse/dts/inmate-pine64-plus.dtb \
+ -i /usr/libexec/jailhouse/demos/rootfs.cpio \
+ -c "console=ttyS0,115200 ip=192.168.19.2"
+ssh 192.168.19.2
+jailhouse disable
diff --git a/recipes-core/customizations/files/postinst-pine64-plus b/recipes-core/customizations/files/postinst-pine64-plus

new file mode 100644

[Vijai Kumar K]

- Add the necessary machine, multiconfig and wks file.
- Add entry in images list.

- Add info in README.

Signed-off-by: Vijai Kumar K <vijaikumar....@gmail.com>
---

README.md | 6 ++++++

conf/machine/pine64-plus.conf | 19 +++++++++++++++++++
.../pine64-plus-jailhouse-demo.conf | 14 ++++++++++++++
images.list | 1 +
wic/pine64-plus.wks | 16 ++++++++++++++++

5 files changed, 56 insertions(+)

create mode 100644 conf/machine/pine64-plus.conf
create mode 100644 conf/multiconfig/pine64-plus-jailhouse-demo.conf
create mode 100644 wic/pine64-plus.wks

diff --git a/README.md b/README.md
index 8841513..99d9f0d 100644
--- a/README.md
+++ b/README.md
@@ -115,6 +115,12 @@ is support. You can boot the board directly from the generated SD card image.
The mini UART on the GPIO header (pin 6/8/10: Ground/TXD/RXD) is used as serial
console.

+## Pine64+
+
+The [Pine64+](https://www.pine64.org/devices/single-board-computers/pine-a64/)
+with Allwinner A64 is supported with its 2GB edition. You can boot the board
+directly from the generated SD card image. UART0 available via EXP 10 connector
+(pin 7/8/9: TXD/RXD/GND) is used as serial console. For details refer [here](https://linux-sunxi.org/Pine64#Serial_port_.2F_UART).

Community Resources
-------------------
diff --git a/conf/machine/pine64-plus.conf b/conf/machine/pine64-plus.conf
new file mode 100644

index 0000000..0949ab4
--- /dev/null
+++ b/conf/machine/pine64-plus.conf

@@ -0,0 +1,19 @@

+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:

+# Vijai Kumar K <vijaikumar....@gmail.com>

+#
+# SPDX-License-Identifier: MIT
+#
+

+DISTRO_ARCH = "arm64"
+
+IMAGE_TYPE = "wic-img"
+IMAGER_INSTALL += "u-boot-pine64-plus"
+IMAGER_BUILD_DEPS += "u-boot-pine64-plus"
+PREFERRED_PROVIDER_u-boot-pine64-plus = "u-boot-pine64-plus"
+
+IMAGE_INSTALL += "u-boot-script"
diff --git a/conf/multiconfig/pine64-plus-jailhouse-demo.conf b/conf/multiconfig/pine64-plus-jailhouse-demo.conf

new file mode 100644

index 0000000..5e66c94
--- /dev/null
+++ b/conf/multiconfig/pine64-plus-jailhouse-demo.conf

@@ -0,0 +1,14 @@

+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:

+# Vijai Kumar K <vijaikumar....@gmail.com>

+#
+# SPDX-License-Identifier: MIT
+#

+#
+MACHINE = "pine64-plus"
+
+DISTRO = "jailhouse-demo"
diff --git a/images.list b/images.list
index 26a802d..b794d85 100644
--- a/images.list
+++ b/images.list
@@ -7,3 +7,4 @@ macchiatobin Marvell MACCHIATObin
hikey620 LeMaker HiKey (Kirin 620 SoC, 2 GB edition)
ultra96 Avnet Ultra96
rpi4 Raspberry Pi 4 (1 GB edition)
+pine64-plus Pine64+ (Allwinner A64, 2GB edition)
diff --git a/wic/pine64-plus.wks b/wic/pine64-plus.wks

new file mode 100644

index 0000000..aacca04
--- /dev/null
+++ b/wic/pine64-plus.wks

@@ -0,0 +1,16 @@

+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:

+# Vijai Kumar K <vijaikumar....@gmail.com>

+#
+# SPDX-License-Identifier: MIT
+#
+

+part u-boot --source rawcopy --sourceparams "file=/usr/lib/u-boot/pine64-plus/u-boot-sunxi-with-spl.bin" --no-table --align 8
+
+part / --source rootfs-u-boot --ondisk mmcblk0 --fstype ext4 --label platform --align 1024
+
+bootloader --append "rootwait mem=1792M"

--
2.17.1

[Jan Kiszka]

Thanks, I've merged all 4 to next. But we need some tuning: The config
files only come via --latest, not via the default 0.12 release build. We
can either carry the backported patches from upstream in the 0.12 recipe
or describe the limitation in the documentation until the next release
is out.

Jan

[vijai kumar]

I would say let's back-port it. I'll send a patch on that.

Thanks,

Vijai Kumar K

Jan