a preliminary questione

[Ivan Marchesini]

Dear Itzi users and developer,

I'm thinking about to propose the adoption of itzi for a project which involve a medium size town in central Italy.

Due to the historical roads and buildings, the minimum resolution to be used for modeling the terrain elevation is 2 meters (but one meter is probably better).

I remember that I have read some papers where the Itzi software was used using DTM having a resolution of 5 meters. 

Do you think that the software can also run at 1 or 2 meter resolution (assuming enough hardware is available)?

thank you very much

best regards

Ivan  

[Laurent C.]

Hi Ivan,

We successfully used itzi with resolution down to 10cm (to reproduce physical experiments).

There should be no problem using it at 1m.

The only limitation would be the amount of RAM if your domain is large, and your patience.

Laurent

--
You received this message because you are subscribed to the Google Groups "Itzï" group.
To unsubscribe from this group and stop receiving emails from it, send an email to itzi+uns...@googlegroups.com.
To post to this group, send email to it...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/itzi/1e9f9c76-b33f-4d14-b256-00ae15dab523%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Ivan Marchesini]

Good to know this, Laurent!!

Thank you very much

Ivan

--

Sent by smartphone