Help

[docw...@gmail.com]

hello can someone help me, when I run fitByOptim I find this error message;

> SefraFit <- fitByOptim(SefraMod, samples = 20,

+ method = "PORT")

Error in rval[i, j, drop = drop., ...] : indice hors limites

Error in rval[i, j, drop = drop., ...] : indice hors limites

Thanks

[Willem Vervoort]

Dear docwafa,

without providing any more information about the model you are trying to fit and a sample of your data it is difficult to answer your question

Knowing what version of hydromad and R you are running would also be helpful

Have you checked the github site: https://github.com/josephguillaume/hydromad

We have been doing a bit of work on hydromad and it would be good to make sure you have the latest release

Regards

Willem

--
You received this message because you are subscribed to the Google Groups "hydromad users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hydromad-user...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/hydromad-users/d7d5828f-7fa1-4ef3-b808-3b7f3ba070dan%40googlegroups.com.

[wafa doc]

I work with R 3.4.4 and  Hydromad model with "cwi" SMA and "expuh" routing,  as follows:

> SefraMod <- hydromad(ts24s, sma = "cwi", routing = "expuh",
+ tau_s = c(5, 100), tau_q = c(0, 5), v_s = c(0,1))
> print(SefraMod)

Hydromad model with "cwi" SMA and "expuh" routing:
Start = NA, End =

SMA Parameters:
      lower upper    
tw        0   100    
f         0     8    
scale    NA    NA    
l         0     0 (==)
p         1     1 (==)
t_ref    20    20 (==)
Routing Parameters:
      lower upper  
tau_s     5   100  
tau_q     0     5  
v_s       0     1  
> xyplot(SefraMod)

Error in rval[i, j, drop = drop., ...] : indice hors limites

but finally the problem is not in the calibration is it just after the modeling at the level of graphic representation"xyplot"

a sample of my data is attached

Thanks for your response and attention.

To view this discussion on the web visit https://groups.google.com/d/msgid/hydromad-users/CAHJpk%3DJXTPzZs%2BX-AUK7HENsHaJsP%3DA%2B_1E586nh7mwKDdqa-g%40mail.gmail.com.

[Willem Vervoort]

Dear Wafa,

looking at your exampled data, I think you need to reread the discussion we had previously: https://groups.google.com/g/hydromad-users/c/b4gq-SQf1G0/m/KuH-1oaUBwAJ

regards

Willem

To view this discussion on the web visit https://groups.google.com/d/msgid/hydromad-users/CAMAqbMovTfq9KSRU_oFYiZS8HN8f6-UzQwX-5X%3DF6%2Bfa8aVxsg%40mail.gmail.com.

[wafa doc]

Thank you again, Mr Willem, I did a research and found that the date format was not a problem; despite this I modified my data as you said but it remains the same problem.

greetings

To view this discussion on the web visit https://groups.google.com/d/msgid/hydromad-users/CAHJpk%3DJod-doVdRMn8VQh-Ry5b%3DkczLpvGm0p-5D4vLADqNiag%40mail.gmail.com.

[Willem Vervoort]

Hi Wafa,

so does your modified data conform the examples in the tutorial?

Regards

Willem

To view this discussion on the web visit https://groups.google.com/d/msgid/hydromad-users/CAMAqbMriBjVpRALF7Ef%2BNtqBf%3DGAxk7Lzzc-5JdOmxx3nGr37A%40mail.gmail.com.