Problem with Hugin Panorama, cont.

[scott092707]

>You need to set the output projection to 'rectilinear'...

It was already.

>...and optimize 'translation' parameters in the geometric optimiser.

View->Optimizer is greyed out, and un-selectable.

The Photos tab, bottom left, has Optimize->Geometric

http://hugin.sourceforge.net/docs/manual/Hugin_Optimiser_tab.html

(I find no tab for Optimizer) says:

"when stitching a map or when all is on the same plane you don't need to optimize plane yaw/plane pitch. These variables should only used when there are several remapping planes in the pictures are needed (e.g. for patching a nadir image). For stitching images on the same plane, you have only one defined remapping plane. "

but all options in Optimize->Geometric all have y p and r, except "Custom Parameters", and nothing seems to happen when I select that option.

Oh, wait...when I select "Custom", the Optimize tab appears!

It seems to have selected p and r for the left photo, and y p and r for the right.

I will uncheck all 5, and optimize.

No...It wants SOMETHING to be checked to optimize, so I'll check the X Y Z for the right ("Active") photo.

Oh, yes! much better!  The bottom edge is almost straight, and things look good enough, I guess... The sides are bulging out a bit, and the middle divider line is a bit curved, despite all three being "Vertical Line"s.  Unless you can suggest some way of fixing these lines, I guess we're OK now...

Thank you!

>...so anything you attach gets sent to 2000 mailboxes.

Sorry!  Although I fail to see how I could adequately explain what was not working unless I actually SHOW it...