Strange haze on panorama photo stitched in HUGIN

[maciej.szcze...@gmail.com]

Hello :)

I cannot handle one issue with strange haze(extra low contrast) on left side of the photo.

To stitch it I used around 40-50 photos and it does not matter if I use tiff or jpeg ,small/high resolution source photos.

What can be wrong with this becaus on the preview there is no such?

Preview:

Pano:

[Terry Duell]

Hello maciej,

On Sat, 21 Jun 2014 19:30:16 +1000, <maciej.szcze...@gmail.com>
wrote:

>
>
> Hello :)
> I cannot handle one issue with strange haze(extra low contrast) on left
> side of the photo.
> To stitch it I used around 40-50 photos and it does not matter if I use
> tiff or jpeg ,small/high resolution source photos.
> What can be wrong with this becaus on the preview there is no such?
>

I'm not sure, but it could be an Enblend problem.
Try using "enblend --no-ciecam"
This should be able to be set in File -> Preferences Programs tab, add
"--no-ciecam" in the "Default Arguments:" to always use this, or can be
done as a command line option in the Stitcher tab as a one off.
Try it and see if it makes any difference.

Cheers,
--
Regards,
Terry Duell

[Monkey]

Is anybody else worried about what's in the bag? :S ;)

[maciej.szcze...@gmail.com]

Thank you Terry , your solution works fine :)

 results:

[David Benes]

Looks very suspicious!

Regards

David

2014-06-22 11:03 GMT+02:00 Monkey <davidh...@gmail.com>:

Is anybody else worried about what's in the bag? :S ;)

--
A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ
---
You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/d69a5908-7e9d-4fdc-a6cd-df9702397bd7%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

[Rak S]

Hello,  I had this problem also after upgrading to v2013.  But the --no-ciecam solution worked for me.  Thanks for the solution.  Still would like to know what caused this though

example

Before

after