Thetis V2.9.0.11 with HL2

[Ed Grafton]

Check this thread. In setup, there is a box to check for HL2 & it's got all of the funky meters.

Understanding G7KLJ 2.9.0.11 release - apache-labs.com

I am 2500 miles away from my HL-2 & cannot test it. 

Ed

[Ed Grafton]

Well, I set it up  CPU usage (Without connecting to HL-2) is 3%, where it was 15% with the latest patched Thetis.

Wow !

Ed

[Ed Grafton]

Sorry, different laptor. It was 7%-8% on this one. Still 1/2 the CPU usage.

Ed

[Ed Grafton]

Meter tutorial:

Thetis 2.9.0.8 pre-release - Meters Overview - YouTube

Ed

[John Williams]

How did you install this new release so it will not affect the current release?

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/hermes-lite/c676da12-1ad0-4afa-98e9-e22547c97b5an%40googlegroups.com.

 

[Ed Grafton]

It overwrote the old release. The author only has an HL-2  no Anan units, so it seems that he added all settings for HL-2, then began stripping out ancient code & optimizing.

When setting up meters, it automagically had the right PO for the Hermes.

I am reading a couple reports of Aan issues.

I have not tried connecting, due to being 2500 miles from my HL-2.

It seemed to have all of my database settings imported from the old version  does not seem to need the patch.

Ed

[Ezio Insinna]

Hello Ed and all,

I've tried to switch to this new version 2.9.0.11 from the latest 2.9.0.6-HL I'd installed a couple of weeks ago. There are, however, some problems when operating with my HL2

1. The SWR indication is wrong.  It displays 1.0:1 when the real SWR is 1.7:1.

2. Pure Signal does not work right. Either it displays VAC1 overload or it does not correct the signal properly. The very same setup and feedback level works nicely with 2.9.0.6-HL.

3. I do not find any difference in CPU usage between this and the 2.9.0.6-HL version. Both show on my I7 HP 8Gb Ram PC 13 to 14% CPU load.  

I'll stick with the 2.9.0.6-HL for the moment and I'll run more tests in the next few days.

73 to all

Ezio - K3EK / F5MWA

  

To view this discussion on the web visit https://groups.google.com/d/msgid/hermes-lite/0808b99d-89bb-4728-9eef-d64e00322cb0n%40googlegroups.com.

[Ed Grafton]

I do recall that the PS numbers were changed to make them more in line with the Anans. I think it was due to hardware. It was somewhere in the lengthy changelog.

Ed