Second beta release of Thetis v2.10.3.11

[scumballc...@gmail.com]

Here is the second beta release of v2.10.3.11 of Thetis for HL2.
https://github.com/mi0bot/OpenHPSDR-Thetis/releases/tag/v2.10.3.11-beta2

WARNING - This release requires a rebuild of the database if you are upgrading
from 2.10.3.6 or earlier.

    - Fixed Mic control not adjusting all gain controls
   - Added support for cmASIO for Mic control (Not tested). If cmASIO is enabled, Mic control will not adjust VAC controls.

This release contains the database manager. If you have other Anan radios, this release will work with them, but you must define separate databases and select the correct database with the -dbid: option. This release creates the shortcut with -dbid:HL2. As the official release of Thetis for the Anan series of radios is not HL2 aware, there may be issues if you try to use the official Thetis with a database that is HL2 aware. Please back up your databases.

There is no need for the official Thetis release to be installed before this release. If you have the official release installed, this release will not overwrite it.

No warranty or guarantee, use at your own risk. Do a backup of your current Thetis database just in case and ensure correct power output.
Cheers

Reid
Gi8TME/Mi0BOT

[Phil]

Thanks Reid, downloading now..  I did notice with Beta1 that I couldn;t select the correct power scale on the meters and had to delete and re-create my containers to get the 10W power scale.

Phil

VK7ZPD

[Reid Campbell]

Hi Phil,

It's not an area that has any differences between the HL2 and normal Thetis, so not sure what would be the issue.

Cheers

Reid
Gi8TME/Mi0BOT

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/aac8cef8-1e2c-485d-8d73-09e1d8e691a5n%40googlegroups.com.

[randol...@gmail.com]

Solved my VAC not working with VB Cable VAC1 problem.

Much thanks,.

Randy

W7CPA

[F8NDN]

Hello,

 

I no longer have VAC, and the audio drivers are missing. I have to reset with the CTRL key at startup. But as soon as I close and reopen, the same problem occurs.

--

You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.

To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/9f01ac70-ea70-41d8-85b0-92120a281dd5n%40googlegroups.com.

[F8NDN]

A pop-up scans for audio devices

To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/001001dc3add%24ee66f320%24cb34d960%24%40ham-radio.ovh.

[Christian DRAGICEVIC]

Well, after some research, the audio drivers disappear with the installation of VoiceMeeter. You have to change the original source to find them again.

To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/006101dc3b68%2442f60810%24c8e21830%24%40ham-radio.ovh.

[Villas Boas]

HI My Suggestions when work beta 3:

- MIDI/CONFIG/CAT: Option to toggle NR1/NR2/NR3/NR4/OFF on the same MIDI button (such as using the mouse).
- MIDI/CONFIG/CAT:Option to Toggle NB1/NB2/OFF in same  MIDI button (such as using the mouse).
- DPS/AGC/ALC : "Auto AGC RX1 (requires pana/water)" not retain checked option when start Thetis (RX2 is OK in this retain).
- MAIN SCREEN: Peak Blobs button (behind Blobs button in left Thetis screen) doesn't work.
- GENERAL/OPTIONS/OPTIONS-1: Save different values ​​in "RF Delay" and "PTT Delay" options in the respective saved TX Profile.
- APPEARANCE/RX DISPLAY: Band Edge set a "Line Width" (as it has for "Data Line Width").
- Put the default value in the tooltip when the mouse points to a control.
- Put in the console title bar Data base name in use
- Enable resizing of the Panadapter/Waterfall relationship when the RX2 is visible.

73, Villas - PY5VB
Curitiba - PR
GG54HO75oh - 969m Lat: -25.394618 Long: -49.353472
http://k7fry.com/grid/?qth=GG54HO75OH&t=s

To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/aa9cddc3-21dd-4a3f-8398-68d40649896e%40gmail.com.

[randol...@gmail.com]

Windows Defender is claiming severe Trojan in Beta 2. Is this bogus?

Thetis-v2.10.3.11x64-HL2-beta2.msiFailed - Virus detected

From https://github.com

[Ezio Insinna]

Hello Reid,

I just received the new Anan 10E Revised version and would like to use it alternately with my HL2.

I started the Thetis version (not the HL2 version) but the name HL2 is displayed also in that version. It's a bit confusing. 

In any case I declared the Anan 10E in the menu and the Anan worked all right but I guess it has uploaded the setup of my HL2 database

because my MIDI console was operational without any changes.

It also did NOT execute the FFT check as I expected.

My question : Should I download the standard Thetis 2.10.3.11 and install it separately or can I have the ANAN work with what you call the non HL2 version ?.  

Thanks in advance for your help.

73

Ezio - F5MWA / K3EK

To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/000c01dc3d54%241c9c8840%2455d598c0%24%40dragicevic.eu.