new release Openwebrx

[jose manuel Bernabeu]

hello everybody

in the openwebrx last release , they comment that the support for Hermes lite 2
 is added.

However Iḿ not able to connect the server with the HL2.

any help is appreciated, thank you very much

[Jim Ancona]

Hi Jose,

I'm the developer of the HPSDR connector. Can you tell me a bit about how you installed OpenWebRX and what you tried to get it running with the HL2?

Jim

N1ADJ

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/hermes-lite/a80a26d6-89c5-484f-a4c6-d8d8e339e0bdn%40googlegroups.com.

[Jim Ancona]

(Replying to the list so other folks can see.)

You will need to configure a device and profile for the HL2 using the new settings UI in OpenWebRX. See this wiki page for the basics: https://github.com/jketterl/openwebrx/wiki/Configuration-guide

You will have to create a new HPSDR device, then add one or more profiles to that device. I'm going to add some information to the HPSDR connector wiki page and will update this thread after I do that.

Jim

N1ADJ 

On Mon, May 10, 2021 at 10:15 AM jose manuel Bernabeu <ea4...@gmail.com> wrote:

Hi Jim

to run openwebrx I use a raspberry pi 4 connected to the same router as the HL2.

openwebsdr recognizes a sdrplay receiver and an rtl receiver that I have connected to the raspberry, but I do not see information about the HL2.

Thank you very much for your work and for your answer.

You received this message because you are subscribed to a topic in the Google Groups "Hermes-Lite" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/hermes-lite/DIX6vjarHdk/unsubscribe.
To unsubscribe from this group and all its topics, send an email to hermes-lite...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/hermes-lite/CAKYY9AL0%2BJfFUXqXp6Xf2CoUig2hi%3DKT6-oNsaRRRzZoyyJODA%40mail.gmail.com.

[Jim Ancona]

Here's the updated wiki page, which now explains a bit more about how to configure OpenWebRX for the HL2: https://github.com/jketterl/openwebrx/wiki/HPSDR-(including-Hermes-Lite-2)-device-notes

If anyone still has problems, I'm happy to help troubleshoot them.

Jim

N1ADJ

[jose manuel Bernabeu]

Thank you Jim for your help.

after two attempts it is already working.

thanks for your fantastic work and your help.

73 Pepe EA4CF

To view this discussion on the web visit https://groups.google.com/d/msgid/hermes-lite/CAKYY9A%2Bax6ujcu4Y1bkCwCm0ng7O0%2BLZkmrOR82-9nBh%3DrER8A%40mail.gmail.com.