HL2 no longer connecting after installing 3 pins for IO board

[Anthony Shellenbarger]

So, I've been running my HL2 (bought from Makerfabs) with the IO board for a few months now, but I only just now realized that you were supposed to solder three additional pins to the HL2 main board for the IO Board (as described here: https://github.com/jimahlstrom/HL2IOBoard). I had only been using the IO board for puresignal, so I hadn't really noticed.

So I soldered on the three headers, and now I can't connect to it anymore. When the ethernet is disconnected, D2 is solid,  but when I plug in the ethernet, D2 through D5 turn off (but the ethernet lights turn on). Although I have seen D5 come on a few times when testing it before, I can't consistently get it to come on.

So, was I supposed to solder those headers on? 

[Mike Lewis]

Not likely related.  More likely a setting was waiting and turning it off revealed it.

Start with this.  Troubleshoot Network · softerhardware/Hermes-Lite2 Wiki

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/85e1f97d-091f-4ce0-9668-c792f672986bn%40googlegroups.com.