HL2 trouble

[Phil]

I have the D2 (CLK) and D5 (HW) LEDs flashing on my HL2 and software will not connect.

I was installing pihpsdr in a linux machine. I couldn't get the software to discover the HL2.

It found and displayed my PC ip and the word Subnet next to it. I believe it is telling me it couldn't find the subnet. Note: Thetis did work find prior to my adventure.

As I went to power down for the night I found my Hermes had D2 and D5 flashing. 

A power reset did not help.

I believe I need to do a hard reset. Is this correct? Any assistance is appreciated.

Thanks,

Phil KB3UU

[Phil]

Correction D5 (HW) LED is on solid.

Phil KB3UUL

--
You received this message because you are subscribed to the Google Groups "Hermes-Lite" group.
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/hermes-lite/41cf899e-4527-4ad6-8115-af5b9bcfbfc7n%40googlegroups.com.

[Phil]

Please disregard, I found my error. The Hermes unit was not plugged in at the switch. 

Brain dead last night.

Thank you,

Phil KB3UUL