power and W'Bal chart_gap in elapsed time value

[Bernard Rybicki]

Hi all,

I generated a power and W'Bal chart with single series per plot (one chart for the power and one chart for W'Bal.

By moving the mouse, I presume that the elapsed time should be in the same vertical value for both chart.

There is a gap of 40s between both elapsed time for power and W'Bal.

Bernard.

[ZajtiM]

Hi Bernard.

https://github.com/GoldenCheetah/GoldenCheetah/wiki/UG_Special-Topics_Working-with-User-Charts#axis-settings

Change from "Continuous" to "Time"

[Bernard Rybicki]

Hi ZajtiM,

I've checked the settings of the chart.

Elapsed time was already set to time.

And it changes nothing.

Bernard

--
_______________________________________________
Golden-Cheetah-Users mailing list
golden-che...@googlegroups.com
http://groups.google.com/group/golden-cheetah-users?hl=en
---
You received this message because you are subscribed to a topic in the Google Groups "golden-cheetah-users" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/golden-cheetah-users/6EfOaJIkahs/unsubscribe.
To unsubscribe from this group and all its topics, send an email to golden-cheetah-u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/golden-cheetah-users/3a865845-180b-45df-be4c-4895d9cd9277n%40googlegroups.com.

[ZajtiM]

I didn't say change Elapsed time. 

Change from "Continuous" to "Time". Which contains Continuous? Change that to "Time" instead of "Continuous".

I tested it before i posted my reply. But time label above each chart will still be couple of seconds off.

[Bernard Rybicki]

Hi,

I checked again settings of the chart :

Elapsed time type is set to Time

Power type is set to continous

W'Bal is set to continous

the gap between elapsed time is 12s

I made another setting :

Elapsed time type set to Time

Power type set to Time

W'Bal set to Time

Elapsed time is the same for both charts.

But obviously, y-scales have changed and are not correct.

That seems to be curious.

When I uncheck 'single series per plot' in the chart settings and we have both curves drawn on the same chart, all seems to be correct.

Bernard.

[Ale Martinez]

El sábado, 20 de septiembre de 2025 a la(s) 3:52:15 p.m. UTC-3, bernard....@gmail.com escribió:

Hi all,

I generated a power and W'Bal chart with single series per plot (one chart for the power and one chart for W'Bal.

By moving the mouse, I presume that the elapsed time should be in the same vertical value for both chart.

Ok, but when the results don't match your assumptions you should reconsider them, didn't you?

There is a gap of 40s between both elapsed time for power and W'Bal.

I don't see the chart code but it is very likely the x-values are different: Power series can have gaps and W''bal can't by construction.

When you put them on the same axis they are synced, when you put them on different axes otherwise... 

[Bernard Rybicki]

Hi,

Power and W'Bal on the same chart is the best wayto sync them.

And I keep in mind : "when the results don't match your assumptions you should reconsider them, didn't you?"

Bernard.