Changes to install.rst
10 views
Skip to first unread message
Waldek Hebisch
Jan 7, 2024, 7:15:12 PMJan 7
to fricas...@googlegroups.com
I would like to do the following change to install.rst (and
consequently INSTALL). This is mostly change due to Ralf,
but I did small change to Aldor instructions. Now it is
enough to give '--enable-aldor' to make Aldor interface,
do I removed part about changing directores and 'make'
in the subdirectory.
I also did small change to performance comparison corresponding
to my latest measurements.
--
Waldek Hebisch
consequently INSTALL). This is mostly change due to Ralf,
but I did small change to Aldor instructions. Now it is
enough to give '--enable-aldor' to make Aldor interface,
do I removed part about changing directores and 'make'
in the subdirectory.
I also did small change to performance comparison corresponding
to my latest measurements.
--
Waldek Hebisch
Ralf Hemmecke
Jan 8, 2024, 7:43:56 PMJan 8
to fricas...@googlegroups.com
Hi Waldek,
On 1/8/24 01:15, Waldek Hebisch wrote:
> I would like to do the following change to install.rst (and
> consequently INSTALL). This is mostly change due to Ralf,
> but I did small change to Aldor instructions. Now it is
> enough to give '--enable-aldor' to make Aldor interface,
> do I removed part about changing directores and 'make'
> in the subdirectory.
I've added your changes to my patch and also corrected a little.
It would be ready to commit (patch attached).
> I also did small change to performance comparison corresponding
> to my latest measurements.
The "than" in line 73 looks a bit weird. Shouldn't it be "then"?
https://github.com/hemmecke/fricas/blob/update-doc-aldor-interface/src/doc/sphinx/source/install.rst?plain=1#L73
On 64-bit AMD64 on average SBCL is the fastest one (9 times faster than
CLISP), Clozure CL and GCL the second (about 3 times slower than SBCL),
than ECL (about 7 times slower than SBCL) and CLISP is the slowest
^^^^
one. Note: very old versions of ECL were much (about 4 times) slower,
versions from about 7-10 years ago gave best performance and
newest ECL versions are progressively slower.
Ralf
On 1/8/24 01:15, Waldek Hebisch wrote:
> I would like to do the following change to install.rst (and
> consequently INSTALL). This is mostly change due to Ralf,
> but I did small change to Aldor instructions. Now it is
> enough to give '--enable-aldor' to make Aldor interface,
> do I removed part about changing directores and 'make'
> in the subdirectory.
It would be ready to commit (patch attached).
> I also did small change to performance comparison corresponding
> to my latest measurements.
https://github.com/hemmecke/fricas/blob/update-doc-aldor-interface/src/doc/sphinx/source/install.rst?plain=1#L73
On 64-bit AMD64 on average SBCL is the fastest one (9 times faster than
CLISP), Clozure CL and GCL the second (about 3 times slower than SBCL),
than ECL (about 7 times slower than SBCL) and CLISP is the slowest
^^^^
one. Note: very old versions of ECL were much (about 4 times) slower,
versions from about 7-10 years ago gave best performance and
newest ECL versions are progressively slower.
Ralf
Waldek Hebisch
Jan 8, 2024, 7:52:40 PMJan 8
to fricas...@googlegroups.com
On Tue, Jan 09, 2024 at 01:43:51AM +0100, Ralf Hemmecke wrote:
> Hi Waldek,
>
> On 1/8/24 01:15, Waldek Hebisch wrote:
> > I would like to do the following change to install.rst (and
> > consequently INSTALL). This is mostly change due to Ralf,
> > but I did small change to Aldor instructions. Now it is
> > enough to give '--enable-aldor' to make Aldor interface,
> > do I removed part about changing directores and 'make'
> > in the subdirectory.
>
> I've added your changes to my patch and also corrected a little.
>
> It would be ready to commit (patch attached).
OK, please commit (with correction below).
> Hi Waldek,
>
> On 1/8/24 01:15, Waldek Hebisch wrote:
> > I would like to do the following change to install.rst (and
> > consequently INSTALL). This is mostly change due to Ralf,
> > but I did small change to Aldor instructions. Now it is
> > enough to give '--enable-aldor' to make Aldor interface,
> > do I removed part about changing directores and 'make'
> > in the subdirectory.
>
> I've added your changes to my patch and also corrected a little.
>
> It would be ready to commit (patch attached).
> > I also did small change to performance comparison corresponding
> > to my latest measurements.
>
> The "than" in line 73 looks a bit weird. Shouldn't it be "then"?
>
> https://github.com/hemmecke/fricas/blob/update-doc-aldor-interface/src/doc/sphinx/source/install.rst?plain=1#L73
>
> On 64-bit AMD64 on average SBCL is the fastest one (9 times faster than
> CLISP), Clozure CL and GCL the second (about 3 times slower than SBCL), than
> ECL (about 7 times slower than SBCL) and CLISP is the slowest
> ^^^^
> one. Note: very old versions of ECL were much (about 4 times) slower,
> versions from about 7-10 years ago gave best performance and
> newest ECL versions are progressively slower.
Waldek Hebisch
Reply all
Reply to author
Forward
0 new messages