MASS FLUX on SLCF

[joseragonfid]

Hi

I'm making a model of some water arcs, seeing how the air affects it, adding an air boundary condition.

When placing an SLCF plane with a QUANTITY = 'MASS FLUX' it repeatedly gives me the error "ERROR: Output QUANTITY 'MASS FLUX' not appropriate at solid boundary"

I do not understand what the error may be, when in previous tests I have been able to put that cut.

In the guide when he talks about MASS FLUX he does it for SURF, and I can't find that he talks about it for SLCF

Thanks!

[Randy McDermott]

You want MASS FLUX WALL.  Have a look at the list of outputs at the back of the user guide.

--
You received this message because you are subscribed to the Google Groups "FDS and Smokeview Discussions" group.
To unsubscribe from this group and stop receiving emails from it, send an email to fds-smv+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/01e28ac4-8908-41c9-bea2-95d57a31e56bn%40googlegroups.com.

[joseragonfid]

I had already seen the MASS FLUX WALL

But the problem is that with this order:

&SLCF PBX=91.2, QUANTITY='MASS FLUX X', SPEC_ID='AIR' /

It depends on the coordinates of the plane, sometimes I get the commented error and sometimes not. And I can't find why that happens

[Randy McDermott]

If you want to look at data on a boundary, you want to use BNDF, not SLCF.  Again, in the guide you will see a code telling which outputs are appropriate for BNDF, SLCF, etc.

To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/ed87e607-f5cd-45a2-a69f-c31a7d42519cn%40googlegroups.com.