Thank you for the information about HT3D.
Also, I have attached my .out file. It shows the grid dimensions as I specified in the input file, and as far as the physical dimensions are concerned, it has made a round off for some dimensions.
--
You received this message because you are subscribed to the Google Groups "FDS and Smokeview Discussions" group.
To unsubscribe from this group and stop receiving emails from it, send an email to fds-smv+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/c065a5da-688b-4296-8ad0-66e022a8338bn%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/8e180412-5e35-4b31-85b8-c6f33cdbc59fn%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/f30163c4-1abb-4bc6-814b-b51632f68b32n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/CAC6wax3tGNgHyvZxAjH8DJHpt-XWXwPUxPs3r63e5Ryou3nwCw%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/CAN%3Doa6ap9O3NGOcTuHfJoF6LnOO-X3-DBzrrBe4_p4ZbsmWV4g%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/CAC6wax08rZp8b3vFmO-Dr7wfT%2BktNLzi8QkA%3DjpkJW0j-b%2Bhtw%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/CAN%3Doa6YB76hq_PoNNCM9ozs0gD7O6v9O_9aHWqSOR5LD4LDvQg%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/efcb6522-3261-46af-bf75-6ca644c0c3ccn%40googlegroups.com.