more trouble installing new etm

[lawquest]

pip install says I need python 3.6, at least for the wheel version (I have not tried the alternate etm).  Repository for Debian buster doesn't have 3.6 but instead has python 3.7.3.  Pip balks at 3.7.3, saying I have to have 3.6.

John

[Daniel Graham]

Strange. Here’s the relevant line from setup.py:

REQUIRES_PYTHON = '>=3.6.0'

Notice that it requires a version greater than or equal to 3.6. I’m using 3.7.4 myself. Are you running a version of pip that uses python 3? Instead of running “pip install …” run “pip -V”. The “from” part of the output should have “Versions/3 …”. Usually you can run “pip3" instead of just “pip” to be sure you’re getting version 3 of python for the install.

-- Dan

On Nov 9, 2019, at 3:22 PM, lawquest <jo...@lawquest.com> wrote:

pip install says I need python 3.6, at least for the wheel version (I have not tried the alternate etm).  Repository for Debian buster doesn't have 3.6 but instead has python 3.7.3.  Pip balks at 3.7.3, saying I have to have 3.6.

John

--
You received this message because you are subscribed to the Google Groups "Event and Task Manager" group.
To unsubscribe from this group and stop receiving emails from it, send an email to eventandtaskman...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/eventandtaskmanager/85e2c6fe-d9d2-48e1-999b-75f372c836c2%40googlegroups.com.

[lawquest]

Perhaps you can figure out what I am doing wrong from the following log:

"johwhi@debian:~$ cd new-etm
johwhi@debian:~/new-etm$ ls
etm_dgraham-4.0.0b4-py2.py3-none-any.whl
johwhi@debian:~/new-etm$ pip install etm_dgraham-4.0.0b4-py2.py3-none-any.whl
Processing ./etm_dgraham-4.0.0b4-py2.py3-none-any.whl
etm-dgraham requires Python '>=3.6.0' but the running Python is 2.7.16
johwhi@debian:~/new-etm$ alias python='/usr/bin/python3.7'
johwhi@debian:~/new-etm$ pip install etm_dgraham-4.0.0b4-py2.py3-none-any.whl
Processing ./etm_dgraham-4.0.0b4-py2.py3-none-any.whl
etm-dgraham requires Python '>=3.6.0' but the running Python is 2.7.16
johwhi@debian:~/new-etm$ python --version
Python 3.7.3
johwhi@debian:~/new-etm$ pip3 install etm_dgraham-4.0.0b4-py2.py3-none-any.whl
bash: pip3: command not found
johwhi@debian:~/new-etm$ pip install etm_dgraham-4.0.0b4-py2.py3-none-any.whl
Processing ./etm_dgraham-4.0.0b4-py2.py3-none-any.whl
etm-dgraham requires Python '>=3.6.0' but the running Python is 2.7.16
johwhi@debian:~/new-etm$ python --version
Python 3.7.3
johwhi@debian:~/new-etm$ pip install etm-dgraam
Collecting etm-dgraam
Could not install packages due to an EnvironmentError: 404 Client Error: Not Found for url: https://pypi.org/simple/etm-dgraam/

johwhi@debian:~/new-etm$ pip install etm-dgraham
Collecting etm-dgraham
  Could not find a version that satisfies the requirement etm-dgraham (from versions: )
No matching distribution found for etm-dgraham
johwhi@debian:~/new-etm$ python --version
Python 3.7.3
johwhi@debian:~/new-etm$ ls
etm_dgraham-4.0.0b4-py2.py3-none-any.whl
johwhi@debian:~/new-etm$ "

Thanks for any help here.

John

On Saturday, November 9, 2019 at 1:07:05 PM UTC-8, Dan wrote:

Strange. Here’s the relevant line from setup.py:

REQUIRES_PYTHON = '>=3.6.0'

Notice that it requires a version greater than or equal to 3.6. I’m using 3.7.4 myself. Are you running a version of pip that uses python 3? Instead of running “pip install …” run “pip -V”. The “from” part of the output should have “Versions/3 …”. Usually you can run “pip3" instead of just “pip” to be sure you’re getting version 3 of python for the install.

-- Dan

On Nov 9, 2019, at 3:22 PM, lawquest <jo...@lawquest.com> wrote:

pip install says I need python 3.6, at least for the wheel version (I have not tried the alternate etm).  Repository for Debian buster doesn't have 3.6 but instead has python 3.7.3.  Pip balks at 3.7.3, saying I have to have 3.6.

John

--
You received this message because you are subscribed to the Google Groups "Event and Task Manager" group.

To unsubscribe from this group and stop receiving emails from it, send an email to eventandtaskmanager+unsub...@googlegroups.com.

[Daniel Graham]

From your output, you are running python 2.7.16. Use pip3.

[lawquest]

Thanks.

I downloaded pip3 and then

pip3 install etm-dgraham

worked.

[lawquest]

Now, when checking, I see I am running etm 3.2.30.  Yet  when checking for updates, I see latest version is 4.0.0b4.  How do I get the latest version?

John

[Daniel Graham]

3.2.30 is a version of etmtk (the old, Tk/Tcl based version of etm). I’m not sure I understand what you are trying to do.

— Dan

[lawquest]

I am trying to open and use the new etm. I just deleted the old etm from synaptic. Now I get nothing.

I gather I probably have a path problem, though I don't know much about paths.  When I do pip3 install -U etm-dgraham, I get a list of "already satisfied, skipping upgrade: stuff but when I type etm I get nothing other than "/usr/bin/etm:" no such file or directory.

John

[lawquest]

johwhi@debian:~$ pip3 install -U etm-dgraham
Requirement already up-to-date: etm-dgraham in ./.local/lib/python3.7/site-packages (4.0.0b4)
Requirement already satisfied, skipping upgrade: tinydb-serialization>=1.0.4 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (1.0.4)
Requirement already satisfied, skipping upgrade: pyperclip>=1.7.0 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (1.7.0)
Requirement already satisfied, skipping upgrade: prompt-toolkit>=2.0.9 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (2.0.10)
Requirement already satisfied, skipping upgrade: tinydb-smartcache>=1.0.2 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (1.0.2)
Requirement already satisfied, skipping upgrade: pytzdata>=2018.9 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (2019.3)
Requirement already satisfied, skipping upgrade: python-dateutil>=2.7.3 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (2.8.1)
Requirement already satisfied, skipping upgrade: MarkupSafe>=1.1.0 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (1.1.1)
Requirement already satisfied, skipping upgrade: style>=1.1.0 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (1.1.6)
Requirement already satisfied, skipping upgrade: tzlocal>=1.5.1 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (2.0.0)
Requirement already satisfied, skipping upgrade: ujson>=1.35 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (1.35)
Requirement already satisfied, skipping upgrade: wcwidth>=0.1.7 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (0.1.7)
Requirement already satisfied, skipping upgrade: Jinja2>=2.10 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (2.10.3)
Requirement already satisfied, skipping upgrade: six>=1.11.0 in /usr/lib/python3/dist-packages (from etm-dgraham) (1.12.0)
Requirement already satisfied, skipping upgrade: pytz>=2018.9 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (2019.3)
Requirement already satisfied, skipping upgrade: icalendar>=4.0.3 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (4.0.3)
Requirement already satisfied, skipping upgrade: pendulum>=2.0.4 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (2.0.5)
Requirement already satisfied, skipping upgrade: update>=0.0.1 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (0.0.1)
Requirement already satisfied, skipping upgrade: tinydb>=3.12.2 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (3.15.1)
Requirement already satisfied, skipping upgrade: ruamel.yaml>=0.15.88 in ./.local/lib/python3.7/site-packages (from etm-dgraham) (0.16.5)
Requirement already satisfied, skipping upgrade: ruamel.yaml.clib>=0.1.2; platform_python_implementation == "CPython" and python_version < "3.8" in ./.local/lib/python3.7/site-packages (from ruamel.yaml>=0.15.88->etm-dgraham) (0.2.0)
johwhi@debian:~$

[Daniel Graham]

From the output, I would guess that the etm executable might be located in ~/.local/bin. Once you find it you can add that directory to your path or simply enter the entire path when you run etm, i.e., ~/.local/bin/etm.

 

-- Dan

-- 
You received this message because you are subscribed to the Google Groups "Event and Task Manager" group.

To unsubscribe from this group and stop receiving emails from it, send an email to eventandtaskman...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/eventandtaskmanager/d172bcc0-441c-4fb9-a579-a69e824f178e%40googlegroups.com.

[lawquest]

That worked.  Thanks!  I will figure out how to add ~/.local/bin to path.

Now, if you don't mind, do I stand risk of hurting the old etm or its data by using the new etm on the same machine?  I recall you earlier said the two could exist peacefully side by side and would appreciate confirmation.

John

 

-- Dan

To unsubscribe from this group and stop receiving emails from it, send an email to eventandtaskmanager+unsub...@googlegroups.com.

[Daniel Graham]

The data stores are completely different - no worries.

-- Dan

To unsubscribe from this group and stop receiving emails from it, send an email to eventandtaskman...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/eventandtaskmanager/fdb81c62-61e9-41e6-a694-4aa4ba16cbc0%40googlegroups.com.

[lawquest]

If I add ~/.local/bin to my path, how will the system know which etm I want to use?  Should I rename one of them first?  Will renaming cause other problems?

For now, I will just leave as is and run ~/local/bin/etm when I want to play with the new etm.

My thinking, if you can call it that, is that I will eventually learn the new etm and, if I like it, take the old etm out of my path (once I figure out how).

John

-- Dan

To view this discussion on the web visit https://groups.google.com/d/msgid/eventandtaskmanager/fdb81c62-61e9-41e6-a694-4aa4ba16cbc0%40googlegroups.com.

[Daniel Graham]

You can run

$ set | grep PATH

to see which directories are already in your path. Pick one of these, e.g., "/usr/local/bin" and the name you would like to use for the new etm, e.g., “etm4”, and then run

$ ln -sf ~/.local/bin/etm /usr/local/bin/etm4

This will create a symbolic link called “etm-new" to the actual etm executable and put it in the directory “/usr/local/bin”. You can run the new etm with

$ etm4

-- Dan

To unsubscribe from this group and stop receiving emails from it, send an email to eventandtaskman...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/eventandtaskmanager/83bb5cca-76df-42c3-98f2-7c350e990a92%40googlegroups.com.

[lawquest]

Not having much luck today:

johwhi@johwhi:~$ ln -sf ~/.local/bin/etm /usr/local/bin/etm4
ln: failed to access '/usr/local/bin/etm4': Permission denied
johwhi@johwhi:~$

Here is set path log:

johwhi@johwhi:~$ set | grep PATH
PATH=/home/johwhi/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
XDG_SEAT_PATH=/org/freedesktop/DisplayManager/Seat0
XDG_SESSION_PATH=/org/freedesktop/DisplayManager/Session1
    local PATH=$PATH:/sbin;
    if [[ -z "${CDPATH:-}" || "$cur" == ?(.)?(.)/* ]]; then
    for i in ${CDPATH//:/'
    PATH=$PATH:/usr/sbin:/sbin:/usr/local/sbin type $1 &> /dev/null
    COMPREPLY=($( compgen -W "$( PATH="$PATH:/sbin" lsmod |         awk '{if (NR != 1) print $1}' )" -- "$1" ))
    local PATH=$PATH:/sbin;
    local PATH="$PATH:/sbin:/usr/sbin";
    COMPREPLY+=($( compgen -W         "$( PATH="$PATH:/sbin" lspci -n | awk '{print $3}')" -- "$cur" ))
    local PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin;
    COMPREPLY+=($( compgen -W         "$( PATH="$PATH:/sbin" lsusb | awk '{print $6}' )" -- "$cur" ))
johwhi@johwhi:~$

I ran the ln-sf (etc) in root and that seemed to work but etm4 does nothing in either # ro $. I get "command not found."

John

-- Dan

To view this discussion on the web visit https://groups.google.com/d/msgid/eventandtaskmanager/83bb5cca-76df-42c3-98f2-7c350e990a92%40googlegroups.com.

[Daniel Graham]

Use "/home/johwhi/bin” instead of “/usr/local/bin”. There is a space between the “ln" and the “-sf”. 

To unsubscribe from this group and stop receiving emails from it, send an email to eventandtaskman...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/eventandtaskmanager/5aabfbd1-3201-4604-9c24-da4563d3bd56%40googlegroups.com.

[lawquest]

That worked.  Thanks.  I should have known that.

John

To view this discussion on the web visit https://groups.google.com/d/msgid/eventandtaskmanager/5aabfbd1-3201-4604-9c24-da4563d3bd56%40googlegroups.com.