Item re-order level, it is able to be multiple re-order level against warehouse. I don't understand the scenario re-order level used. any short explanation?

40 views
Skip to first unread message

Y Y

unread,
Sep 19, 2014, 5:48:08 AM9/19/14
to erpnext-u...@googlegroups.com
Dear Team,

As subject. Thanks in advance.

Best Regards,
Yang

Umair Sayyed

unread,
Sep 19, 2014, 6:16:10 AM9/19/14
to ERPNext User's Forum
Yang,

There could be two ways to recover stock level for an Item. Either purchase, or transfer from another warehouse. On warehouse level, you can specify which action will be taken (purchase or transfer) when stock goes below re-order level at specific location.

Since ERPNext has multi-company option, you can define re-order level for item based on each companies warehouse.

Also its possible that separate re-order level is maintained in various warehouses of the same company, hence the option for warehousewise re-order level.

--
You received this message because you are subscribed to the Google Groups "ERPNext User's Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-user-fo...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-user-forum/bb3f5f84-c93e-4cd5-ab9a-1bbbd29094c8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.



--
Thanks and Regards,
Umair Sayyed
www.erpnext.com

Y Y

unread,
Sep 20, 2014, 11:44:11 PM9/20/14
to erpnext-u...@googlegroups.com
It seems Re-order level is quantity of how much item left(in warehouse) or below.

say, in warehouse table, i added
reorder level, quantity, warehouse, type
500                  2000        ware1      purchase
2000                5000        ware1      purchase,

will this work?

both set as 500, 2000 fro ware1, will it work? what validation/rule shall i follow?

Thanks


在 2014年9月19日星期五UTC+8下午6时16分10秒，Umair Sayyed写道：
Yang,

There could be two ways to recover stock level for an Item. Either purchase, or transfer from another warehouse. On warehouse level, you can specify which action will be taken (purchase or transfer) when stock goes below re-order level at specific location.

Since ERPNext has multi-company option, you can define re-order level for item based on each companies warehouse.

Also its possible that separate re-order level is maintained in various warehouses of the same company, hence the option for warehousewise re-order level.
On Fri, Sep 19, 2014 at 3:18 PM, Y Y <yangy...@gmail.com> wrote:
Dear Team,

As subject. Thanks in advance.

Best Regards,
Yang

--
You received this message because you are subscribed to the Google Groups "ERPNext User's Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-user-forum+unsub...@googlegroups.com.

Umair Sayyed

unread,
Sep 22, 2014, 2:46:39 AM9/22/14
to ERPNext User's Forum
Hello Yang,

One warehouse cannot have two re-order level for the same item. Hence you should set re-order level as 500 OR 2000 for warehouse "ware1".

With this, Material Request will be auto-created and email to Purchase Manager when stock level for this item reaches 500 or 2000 (as per your setting).

This will also require you activating auto-Material Request creation from:

Stock >> Setup >> Stock Settings

Check "Raise Material Request when stock reaches re-order level".

Hope this helps.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-user-fo...@googlegroups.com.
 To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-user-forum/a0694a4f-21d2-4e50-8fd9-3636642654cf%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

Y Y

unread,
Sep 22, 2014, 2:59:23 AM9/22/14
to erpnext-u...@googlegroups.com
Thanks, It helps.

By the way, at my side, seems no validation for the logic "One warehouse cannot have two re-order level for the same item.". However, it is a very low priority check at my side.

Thanks for detail explanation. 

在 2014年9月22日星期一UTC+8下午2时46分39秒，Umair Sayyed写道：


在 2014年9月19日星期五UTC+8下午6时16分10秒，Umair Sayyed写道：
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-user-forum+unsubscribe@googlegroups.com.



--
Thanks and Regards,
Umair Sayyed
www.erpnext.com

--
You received this message because you are subscribed to the Google Groups "ERPNext User's Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-user-forum+unsub...@googlegroups.com.

Umair Sayyed

unread,
Sep 22, 2014, 3:23:59 AM9/22/14
to ERPNext User's Forum
Yang,

Thanks for reporting this issue. A Github Issue please for the required validation.

--
1. Please be kind and don't send large attachments
2. For issues, features requests use https://github.com/frappe/erpnext/issues
---
You received this message because you are subscribed to the Google Groups "ERPNext User's Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-user-fo...@googlegroups.com.
 To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-user-forum/948fdf67-a768-4c9b-ba53-5cf9ad76e858%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

Y Y

unread,
Sep 22, 2014, 3:43:00 AM9/22/14
to erpnext-u...@googlegroups.com
Created. https://github.com/frappe/erpnext/issues/2219, Thanks for explanation.

在 2014年9月22日星期一UTC+8下午3时23分59秒，Umair Sayyed写道：

在 2014年9月22日星期一UTC+8下午2时46分39秒，Umair Sayyed写道：



--
Thanks and Regards,
Umair Sayyed
www.erpnext.com

--
1. Please be kind and don't send large attachments
2. For issues, features requests use https://github.com/frappe/erpnext/issues
---
You received this message because you are subscribed to the Google Groups "ERPNext User's Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-user-forum+unsub...@googlegroups.com.
Reply all
Reply to author
Forward
0 new messages