Pratik please give advice: using tag v4.4, now there is a hotfix on develop branch

[Y Y]

Dear pratick,

Locally, i'm checkout tag as stable version running, now there is a hotfix: https://github.com/frappe/frappe/issues/848

Please help advise, using bench update?

Best Regards,

Yang

[Pratik Vyas]

Released v4.4.1

Thanks!

> --
> Note:
>
> If you are posting an issue,
>
> 1. ERPNext is a free and open source software and support is given on this
> forum by a team (https://frappe.io/webnotes). So please consider donating if
> you find this forum useful (https://frappe.io/buy). Even a small amount
> would be helpful.
> 2. We should be able to replicate it at our end. So please give us as much
> information as you can. Please see it from the point of view of the person
> receiving the communication.
> 3. Paste your code at http://pastebin.com or http://gist.github.com and send
> only the URL via email
> 4. For sending images, use http://imgur.com or other similar services. Do
> not send images as attachments. Links are good. Same goes for any file you
> are going to send.
>
> End of Note
> ---
> You received this message because you are subscribed to the Google Groups
> "ERPNext Developer Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to erpnext-developer...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/f5ff103e-c578-4819-9551-c7b9d6ac7c50%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.



--
Pratik
erpnext

[Y Y]

I was checking out tag4.4, is that i need to checkout develop branch, then do bench update? or just do bench update will work?

Thanks in advance.

在 2014年9月17日星期三UTC+8下午3时51分02秒，Y Y写道：

[Pratik Vyas]

You should switch branches to master. Latest stable tag is always the tip of master. After switching bench update should work fine.

---

From: Y Y
Sent: ‎18-‎09-‎2014 07:13
To: erpnext-dev...@googlegroups.com
Subject: [erpnext-dev] Re: Pratik please give advice: using tag v4.4, nowthere is a hotfix on develop branch

--

Note:
 
If you are posting an issue,
 
1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
 
End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/f84b4dbb-013c-468c-b85f-d0c6d9044cc9%40googlegroups.com.