Hey John
On Fri, May 9, 2014 at 11:35 PM, John Hooks <hook...@gmail.com> wrote:
> I tried to install with the frappe-bench instructions. However the install
> would fail unless I installed libblas-dev and liblapack-dev. Are these
> supposed to be required? Thanks!
>
These seem to be algebra libs and we don't use them.
> --
> Note:
>
> If you are posting an issue,
> 1. We should be able to replicate it at our end. So please give us as much
> information as you can. Please see it from the point of view of the person
> receiving the communication.
> 2. Paste your code at http://pastebin.com or http://gist.github.com and send
> only the URL via email
> 3. For sending images, use http://imgur.com or other similar services. Do
> not send images as attachments. Links are good. Same goes for any file you
> are going to send.
>
> End of Note
> ---
> You received this message because you are subscribed to the Google Groups
> "ERPNext Developer Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
GCC is known fail with bench if you have less memory (<1G). Running install a few times does work sometimes.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/2b57d19c-f75b-410f-a586-b4da1631ac17%40googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/bd1d7fae-ee01-4001-8095-75e1a3c987c4%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Pratik
erpnext
--
Note:
If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+unsub...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/bd1d7fae-ee01-4001-8095-75e1a3c987c4%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
Pratik
erpnext
--
Note:
If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+unsub...@googlegroups.com.