Where is frappe --build_sitemap?

[Luis Fernandes]

I'm using bench from here https://github.com/frappe/frappe-bench but when i enter bench frappe --build_sitemap or frappe --build_sitemap i get: frappe: error: unrecognized arguments: --build_sitemap

I just follow the tutorial https://frappe.io/developers/guide-chat/public-pages and he says: To build this page, run frappe --build_sitemap from the sites folder.

there is other command?

Thanks.

[Anand Doshi]

Hi Luis,

That guide is a bit old. The new command is --build_website

-Anand.

--
Note:
 
If you are posting an issue,
 
1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
 
End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/e609cb70-d913-4b79-a299-de34cafaff19%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Luis Fernandes]

Thanks. I have spend a lot of time searching for the replace!!

Sexta-feira, 29 de Agosto de 2014 17:14:48 UTC+1, Anand Doshi escreveu:

Hi Luis,

That guide is a bit old. The new command is --build_website

-Anand.

On Thu, Aug 28, 2014 at 3:14 PM, Luis Fernandes <luisfmf...@gmail.com> wrote:

I'm using bench from here https://github.com/frappe/frappe-bench but when i enter bench frappe --build_sitemap or frappe --build_sitemap i get: frappe: error: unrecognized arguments: --build_sitemap

I just follow the tutorial https://frappe.io/developers/guide-chat/public-pages and he says: To build this page, run frappe --build_sitemap from the sites folder.

there is other command?

Thanks.

--
Note:
 
If you are posting an issue,
 
1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.
 
End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+unsub...@googlegroups.com.