Re: Digest for electricvlsi@googlegroups.com - 3 updates in 1 topic

[Alexandre Rusev]

These direct links on FreePDK 45nm download resources for Cadence tools may be of  use for you
https://vlsiarch.ecen.okstate.edu/flow/
https://vlsiarch.ecen.okstate.edu/flows/FreePDK_SRC/osu_freepdk_1.0/ref_design/

On Mon, Sep 2, 2019 at 9:30 AM <electr...@googlegroups.com> wrote:

electr...@googlegroups.com

Google Groups

Topic digest
View all topics

• TSMC 45nm PDK - 3 Updates

TSMC 45nm PDK

lingraj hiremath <lingraj....@gmail.com>: Aug 31 11:25PM -0700 Hi,   I need a help in downloading in TSMC 45nm PDK or any other Free PDK to run my circuit simulations in Electric   Please if you could point me to a link or any other source as how to download the free PDK available   Also i am looking if the PDK has both thin gate and thick gate devices to run IO circuits ( Basically having Level up shifters say from 1V to 2.5V and IO Drivers etc)   Thanks Lingraj

Gavin <gabo...@gmail.com>: Sep 01 07:39AM -0700 As far as I know, Electric still does not have a 45nm Technology. So after getting design rules and other information, you would have to create it yourself. Electric has a Technology creation wizard:   https://www.staticfreesoft.com/jmanual/mchap08-11.html   TSMC 45nm PDK (most likely for commercial Cadence software [ https://www.cadence.com/ ]) you can likely get from whomever you sign the NDA with. Refer to the two links:   https://www.mosis.com/vendors/view/tsmc/documents http://europractice-ic.com/mpw-prototyping/asics/tsmc/access-contacts/   For FreePDK45 information, see: https://www.eda.ncsu.edu/wiki/FreePDK https://research.ece.ncsu.edu/eda/freepdk/freepdk45/   For GPDK04 information, see: https://community.cadence.com/cadence_technology_forums/f/custom-ic-design/36796/basics-of-pdk https://perso.telecom-paristech.fr/mathieu/ICS904_TP_LAYOUT/html/_static/doc/gpdk045_pdk_referenceManual.pdf   On Sunday, September 1, 2019 at 8:09:31 AM UTC-6, lingraj hiremath wrote:

lingraj hiremath <lingraj....@gmail.com>: Sep 01 07:51PM -0700 Hi Gavin,   Thanks for the quick response.   I had one question does FreePDK45 has the thick gate devices say for ex: 2.5V, 1.8V etc IO devices   Thanks and Regards Lingraj   On Sunday, 1 September 2019 20:09:10 UTC+5:30, Gavin wrote:

Back to top

You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to electricvlsi...@googlegroups.com.

[Alexandre Rusev]

Has anybody in this list a successful experience of describing electric technology for real world fab?

Could anyone to describe the procedure of verification of dechnology against other cads

[lingraj hiremath]

Hi  Alexandre,

Thanks for your response.

Thanks and Regards

Lingraj

--
You received this message because you are subscribed to the Google Groups "Electric VLSI Editor" group.
To unsubscribe from this group and stop receiving emails from it, send an email to electricvlsi...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/electricvlsi/CACoSTqLzYrZU42p-y%2BgUbKZN76md_GscddNVRQP%2BM9%2BZzez_pA%40mail.gmail.com.