Configuring heli_ewII to work with WWS
11 views
Skip to first unread message
Bob Hammond
Nov 11, 2025, 9:49:31 AMNov 11
to earthwo...@googlegroups.com
How do I configure heli_ewII.d and/or WWS to work together?
I have the correct waveserver IP and port.
I've always used wave_serverV.d and have no experience with a wws.
Or do I have to use a vm or another box running EW and
wave_serverV.d to do this?
Mitchell M Withers (mwithers)
Nov 11, 2025, 10:07:07 AMNov 11
to earthwo...@googlegroups.com
You can connect your heli_ewII.d to the ip:port with WWS exactly the same as you would for waveserverV.
Mitch
Center for Earthquake Research and Information (CERI)
University of Memphis
Memphis, TN 38152
901-678-4940
________________________________________
From: earthwo...@googlegroups.com <earthwo...@googlegroups.com> on behalf of Bob Hammond <propg...@gmail.com>
Sent: Tuesday, November 11, 2025 8:48 AM
To: earthwo...@googlegroups.com
Subject: [Earthworm Forum] Configuring heli_ewII to work with WWS
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and trust the content is safe.
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To post to this group, send an email to earthwo...@googlegroups.com
To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en>
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com<mailto:earthworm_for...@googlegroups.com>.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com<https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com?utm_medium=email&utm_source=footer>.
Bob Hammond
Nov 11, 2025, 10:22:59 AMNov 11
to earthwo...@googlegroups.com
Mitch, I've done that but heli_ewII won't run/zombies on me. I guess something else is going on?
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB2510ACB5A64DCC116513A142CCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com.
Bob Hammond
Nov 11, 2025, 11:07:55 AMNov 11
to earthwo...@googlegroups.com
I'm used to putting something like this in wave_serverV.d:
Tank TBID EHZ WW 00 528 ${EW_INST_ID} MOD_WILDCARD 1 10000 /data/TBID_EHZ_p1001.tnk
And this in heli_ewII.d:
Plot TBID EHZ UI 01 12 1 -7 PDT 1 1 20 20 15 0.01 1.5 1 "TBID EHZ"
What's the equivalent, if any, for a wws?
Bob Hammond
Nov 11, 2025, 1:38:03 PMNov 11
to earthwo...@googlegroups.com
I get a proper response from getmenu 0.0.0.0:16022 but heli_ewII still won't run
ws: 0.0.0.0:16022 pin: 2 TBID.HHZ.WW.00 Start: 20251107_1929_14.50 End: 20251107_2257_34.10
ws: 0.0.0.0:16022 pin: 3 TBID.HHN.WW.00 Start: 20251107_1930_25.02 End: 20251107_2257_32.64
ws: 0.0.0.0:16022 pin: 1 TBID.HHE.WW.00 Start: 20251107_1932_30.56 End: 20251107_2257_32.24
ws: 0.0.0.0:16022 pin: 3 TBID.HHN.WW.00 Start: 20251107_1930_25.02 End: 20251107_2257_32.64
ws: 0.0.0.0:16022 pin: 1 TBID.HHE.WW.00 Start: 20251107_1932_30.56 End: 20251107_2257_32.24
Mitchell M Withers (mwithers)
Nov 11, 2025, 1:42:42 PMNov 11
to earthwo...@googlegroups.com
Your example uses TBID HH? WW 00 channels but your heli plot command has TBID HH? UI 01
Mitch
Center for Earthquake Research and Information (CERI)
University of Memphis
Memphis, TN 38152
901-678-4940
________________________________________
From: earthwo...@googlegroups.com <earthwo...@googlegroups.com> on behalf of Bob Hammond <propg...@gmail.com>
To: earthwo...@googlegroups.com
Subject: Re: [Earthworm Forum] Configuring heli_ewII to work with WWS
I get a proper response from getmenu 0.0.0.0:16022<http://0.0.0.0:16022/> but heli_ewII still won't run
ws: 0.0.0.0:16022<http://0.0.0.0:16022/> pin: 2 TBID.HHZ.WW.00 Start: 20251107_1929_14.50 End: 20251107_2257_34.10
ws: 0.0.0.0:16022<http://0.0.0.0:16022/> pin: 3 TBID.HHN.WW.00 Start: 20251107_1930_25.02 End: 20251107_2257_32.64
ws: 0.0.0.0:16022<http://0.0.0.0:16022/> pin: 1 TBID.HHE.WW.00 Start: 20251107_1932_30.56 End: 20251107_2257_32.24
On Tue, Nov 11, 2025 at 8:07 AM Bob Hammond <propg...@gmail.com<mailto:propg...@gmail.com>> wrote:
I'm used to putting something like this in wave_serverV.d:
Tank TBID EHZ WW 00 528 ${EW_INST_ID} MOD_WILDCARD 1 10000 /data/TBID_EHZ_p1001.tnk
And this in heli_ewII.d:
Plot TBID EHZ UI 01 12 1 -7 PDT 1 1 20 20 15 0.01 1.5 1 "TBID EHZ"
What's the equivalent, if any, for a wws?
On Tue, Nov 11, 2025 at 7:22 AM Bob Hammond <propg...@gmail.com<mailto:propg...@gmail.com>> wrote:
Mitch, I've done that but heli_ewII won't run/zombies on me. I guess something else is going on?
Mitch, I've done that but heli_ewII won't run/zombies on me. I guess something else is going on?
On Tue, Nov 11, 2025 at 7:07 AM Mitchell M Withers (mwithers) <mwit...@memphis.edu<mailto:mwit...@memphis.edu>> wrote:
You can connect your heli_ewII.d to the ip:port with WWS exactly the same as you would for waveserverV.
Mitch
Center for Earthquake Research and Information (CERI)
University of Memphis
Memphis, TN 38152
901-678-4940
________________________________________
From: earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com> <earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>> on behalf of Bob Hammond <propg...@gmail.com<mailto:propg...@gmail.com>>
You can connect your heli_ewII.d to the ip:port with WWS exactly the same as you would for waveserverV.
Mitch
Center for Earthquake Research and Information (CERI)
University of Memphis
Memphis, TN 38152
901-678-4940
________________________________________
Sent: Tuesday, November 11, 2025 8:48 AM
To: earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>
Subject: [Earthworm Forum] Configuring heli_ewII to work with WWS
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and trust the content is safe.
How do I configure heli_ewII.d and/or WWS to work together?
I have the correct waveserver IP and port.
I've always used wave_serverV.d and have no experience with a wws.
Or do I have to use a vm or another box running EW and wave_serverV.d to do this?
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To post to this group, send an email to earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and trust the content is safe.
How do I configure heli_ewII.d and/or WWS to work together?
I have the correct waveserver IP and port.
I've always used wave_serverV.d and have no experience with a wws.
Or do I have to use a vm or another box running EW and wave_serverV.d to do this?
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To unsubscribe from this group, send an email to
For more options, visit this group at
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com<https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com><https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com?utm_medium=email&utm_source=footer<https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com?utm_medium=email&utm_source=footer>>.
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To unsubscribe from this group, send an email to
For more options, visit this group at
http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en>
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB2510ACB5A64DCC116513A142CCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com<https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB2510ACB5A64DCC116513A142CCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com>.
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To post to this group, send an email to earthwo...@googlegroups.com
To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en>
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com<mailto:earthworm_for...@googlegroups.com>.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/CAKoB7Oo%3DN6K-UKy%3DE_dHOPVZsstGurvLHW1C0xt_5_zxBtjjbA%40mail.gmail.com<https://groups.google.com/d/msgid/earthworm_forum/CAKoB7Oo%3DN6K-UKy%3DE_dHOPVZsstGurvLHW1C0xt_5_zxBtjjbA%40mail.gmail.com?utm_medium=email&utm_source=footer>.
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com<mailto:earthworm_for...@googlegroups.com>.
Bob Hammond
Nov 11, 2025, 2:49:50 PMNov 11
to earthwo...@googlegroups.com
That was a copy/paste error on my part. This is what is in heli_ewII:
Plot TBID HHZ WW 00 24 24 -8 PST 1 0 10 18 15 1.0 0.25 1 "Tomer Butte, ID
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB251054466C3834C6E7115004CCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com.
Mitchell M Withers (mwithers)
Nov 11, 2025, 2:54:45 PMNov 11
to earthwo...@googlegroups.com
Hmm, well it's over my head then. If you can get the expected response from the wws with getmenu then heli_ew should work. The wws does need current data though and your getmenu showed only up to 20251107_2257.
Mitch
Center for Earthquake Research and Information (CERI)
University of Memphis
Memphis, TN 38152
901-678-4940
________________________________________
From: earthwo...@googlegroups.com <earthwo...@googlegroups.com> on behalf of Bob Hammond <propg...@gmail.com>
To: earthwo...@googlegroups.com
Subject: Re: [Earthworm Forum] Configuring heli_ewII to work with WWS
Subject: Re: [Earthworm Forum] Configuring heli_ewII to work with WWS
That was a copy/paste error on my part. This is what is in heli_ewII:
Plot TBID HHZ WW 00 24 24 -8 PST 1 0 10 18 15 1.0 0.25 1 "Tomer Butte, ID
Plot TBID HHZ WW 00 24 24 -8 PST 1 0 10 18 15 1.0 0.25 1 "Tomer Butte, ID
On Tue, Nov 11, 2025 at 10:42 AM Mitchell M Withers (mwithers) <mwit...@memphis.edu<mailto:mwit...@memphis.edu>> wrote:
Your example uses TBID HH? WW 00 channels but your heli plot command has TBID HH? UI 01
Mitch
Center for Earthquake Research and Information (CERI)
University of Memphis
Memphis, TN 38152
901-678-4940
________________________________________
Your example uses TBID HH? WW 00 channels but your heli plot command has TBID HH? UI 01
Mitch
Center for Earthquake Research and Information (CERI)
University of Memphis
Memphis, TN 38152
901-678-4940
________________________________________
From: earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com> <earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>> on behalf of Bob Hammond <propg...@gmail.com<mailto:propg...@gmail.com>>
Sent: Tuesday, November 11, 2025 12:37 PM
To: earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>
Subject: Re: [Earthworm Forum] Configuring heli_ewII to work with WWS
I get a proper response from getmenu 0.0.0.0:16022<http://0.0.0.0:16022/><http://0.0.0.0:16022/<http://0.0.0.0:16022/>> but heli_ewII still won't run
ws: 0.0.0.0:16022<http://0.0.0.0:16022/><http://0.0.0.0:16022/<http://0.0.0.0:16022/>> pin: 2 TBID.HHZ.WW.00 Start: 20251107_1929_14.50 End: 20251107_2257_34.10
ws: 0.0.0.0:16022<http://0.0.0.0:16022/><http://0.0.0.0:16022/<http://0.0.0.0:16022/>> pin: 3 TBID.HHN.WW.00 Start: 20251107_1930_25.02 End: 20251107_2257_32.64
ws: 0.0.0.0:16022<http://0.0.0.0:16022/><http://0.0.0.0:16022/<http://0.0.0.0:16022/>> pin: 1 TBID.HHE.WW.00 Start: 20251107_1932_30.56 End: 20251107_2257_32.24
On Tue, Nov 11, 2025 at 8:07 AM Bob Hammond <propg...@gmail.com<mailto:propg...@gmail.com><mailto:propg...@gmail.com<mailto:propg...@gmail.com>>> wrote:
I'm used to putting something like this in wave_serverV.d:
Tank TBID EHZ WW 00 528 ${EW_INST_ID} MOD_WILDCARD 1 10000 /data/TBID_EHZ_p1001.tnk
And this in heli_ewII.d:
Plot TBID EHZ UI 01 12 1 -7 PDT 1 1 20 20 15 0.01 1.5 1 "TBID EHZ"
What's the equivalent, if any, for a wws?
On Tue, Nov 11, 2025 at 7:22 AM Bob Hammond <propg...@gmail.com<mailto:propg...@gmail.com><mailto:propg...@gmail.com<mailto:propg...@gmail.com>>> wrote:
Mitch, I've done that but heli_ewII won't run/zombies on me. I guess something else is going on?
Mitch, I've done that but heli_ewII won't run/zombies on me. I guess something else is going on?
On Tue, Nov 11, 2025 at 7:07 AM Mitchell M Withers (mwithers) <mwit...@memphis.edu<mailto:mwit...@memphis.edu><mailto:mwit...@memphis.edu<mailto:mwit...@memphis.edu>>> wrote:
You can connect your heli_ewII.d to the ip:port with WWS exactly the same as you would for waveserverV.
Mitch
Center for Earthquake Research and Information (CERI)
University of Memphis
Memphis, TN 38152
901-678-4940
________________________________________
From: earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com><mailto:earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>> <earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com><mailto:earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>>> on behalf of Bob Hammond <propg...@gmail.com<mailto:propg...@gmail.com><mailto:propg...@gmail.com<mailto:propg...@gmail.com>>>
You can connect your heli_ewII.d to the ip:port with WWS exactly the same as you would for waveserverV.
Mitch
Center for Earthquake Research and Information (CERI)
University of Memphis
Memphis, TN 38152
901-678-4940
________________________________________
Sent: Tuesday, November 11, 2025 8:48 AM
To: earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com><mailto:earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>>
Subject: [Earthworm Forum] Configuring heli_ewII to work with WWS
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and trust the content is safe.
How do I configure heli_ewII.d and/or WWS to work together?
I have the correct waveserver IP and port.
I've always used wave_serverV.d and have no experience with a wws.
Or do I have to use a vm or another box running EW and wave_serverV.d to do this?
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To post to this group, send an email to earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com><mailto:earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>>
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and trust the content is safe.
How do I configure heli_ewII.d and/or WWS to work together?
I have the correct waveserver IP and port.
I've always used wave_serverV.d and have no experience with a wws.
Or do I have to use a vm or another box running EW and wave_serverV.d to do this?
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To unsubscribe from this group, send an email to
For more options, visit this group at
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com<https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com><https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com<https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com>><https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com?utm_medium=email&utm_source=footer<https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com?utm_medium=email&utm_source=footer><https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com?utm_medium=email&utm_source=footer<https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com?utm_medium=email&utm_source=footer>>>.
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To unsubscribe from this group, send an email to
For more options, visit this group at
http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en><http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en>>
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB2510ACB5A64DCC116513A142CCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com<https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB2510ACB5A64DCC116513A142CCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com><https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB2510ACB5A64DCC116513A142CCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com<https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB2510ACB5A64DCC116513A142CCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com>>.
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To post to this group, send an email to earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>
To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com<mailto:earthworm_forum%2Bunsu...@googlegroups.com>
For more options, visit this group at
http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en><http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en>>
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com<mailto:earthworm_forum%2Bunsu...@googlegroups.com><mailto:earthworm_for...@googlegroups.com<mailto:earthworm_forum%2Bunsu...@googlegroups.com>>.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/CAKoB7Oo%3DN6K-UKy%3DE_dHOPVZsstGurvLHW1C0xt_5_zxBtjjbA%40mail.gmail.com<https://groups.google.com/d/msgid/earthworm_forum/CAKoB7Oo%3DN6K-UKy%3DE_dHOPVZsstGurvLHW1C0xt_5_zxBtjjbA%40mail.gmail.com><https://groups.google.com/d/msgid/earthworm_forum/CAKoB7Oo%3DN6K-UKy%3DE_dHOPVZsstGurvLHW1C0xt_5_zxBtjjbA%40mail.gmail.com?utm_medium=email&utm_source=footer<https://groups.google.com/d/msgid/earthworm_forum/CAKoB7Oo%3DN6K-UKy%3DE_dHOPVZsstGurvLHW1C0xt_5_zxBtjjbA%40mail.gmail.com?utm_medium=email&utm_source=footer>>.
To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com<mailto:earthworm_forum%2Bunsu...@googlegroups.com>
For more options, visit this group at
http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en><http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en>>
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com<mailto:earthworm_forum%2Bunsu...@googlegroups.com><mailto:earthworm_for...@googlegroups.com<mailto:earthworm_forum%2Bunsu...@googlegroups.com>>.
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To post to this group, send an email to earthwo...@googlegroups.com<mailto:earthwo...@googlegroups.com>
To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com<mailto:earthworm_forum%2Bunsu...@googlegroups.com>
For more options, visit this group at
http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en>
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com<mailto:earthworm_forum%2Bunsu...@googlegroups.com>.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB251054466C3834C6E7115004CCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com<https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB251054466C3834C6E7115004CCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com>.
To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com<mailto:earthworm_forum%2Bunsu...@googlegroups.com>
For more options, visit this group at
http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en>
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com<mailto:earthworm_forum%2Bunsu...@googlegroups.com>.
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To post to this group, send an email to earthwo...@googlegroups.com
To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/earthworm_forum?hl=en<http://groups.google.com/group/earthworm_forum?hl=en>
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com<mailto:earthworm_for...@googlegroups.com>.
Larry Baker
Nov 11, 2025, 3:08:35 PMNov 11
to propg...@gmail.com, Larry Baker, earthwo...@googlegroups.com
Bob,
Mitch brings up a good point. Unlike WaveServerV, which incorporates both the feed into the data store and the data server, Winston splits the feed into the data store in an ImportEW process and serves data from the store using WWS. Check your logs for aberrant ImportEW behavior.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/SN6PR16MB251011AA3C68B0720F1E71BCCCCFA%40SN6PR16MB2510.namprd16.prod.outlook.com.
Stefan Lisowski
Nov 23, 2025, 11:35:50 PM (13 days ago) Nov 23
to earthwo...@googlegroups.com
On 11/11/25 9:48 AM, Bob Hammond wrote:
How do I configure heli_ewII.d and/or WWS to work together?I have the correct waveserver IP and port.
Hi Bob --
I didn't see a solution in the thread, so I'll just say...
You use 0.0.0.0 later in this thread; just want to make sure you don't have heli ew pointing to 0.0.0.0. That special 0 address as you probably already know if this isn't your issue, is just for listening. To connect you need to point to loopback 127.0.0.1 or to an actual IP address of your host.
I've always used wave_serverV.d and have no experience with a wws.
Or do I have to use a vm or another box running EW and wave_serverV.d to do this?
--
--
You received this message because you are subscribed to the Google
Groups "Earthworm Community Forum" group.
To post to this group, send an email to earthwo...@googlegroups.com
To unsubscribe from this group, send an email to
earthworm_for...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/earthworm_forum?hl=en
---
You received this message because you are subscribed to the Google Groups "Earthworm Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to earthworm_for...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/CAKoB7OqrC8X-20%3Dkfe7Ojo9q1fj5L7D3rs_OurEcZGoYQTyR%3DQ%40mail.gmail.com.
To follow ISTI news and updates please subscribe to our newsletter "the isti letter" at https://www.isti.com/newsletter-sign-up.
Bob Hammond
Nov 24, 2025, 7:42:23 AM (13 days ago) Nov 24
to earthwo...@googlegroups.com
Thanks Stefan. I DID have heli_ewII pointed to 0.0.0.0. And using the IP of the host solved the issue.
To view this discussion visit https://groups.google.com/d/msgid/earthworm_forum/e190caaa-9005-4d52-b181-a272c7e9a2e1%40isti.com.
Reply all
Reply to author
Forward
0 new messages