coordinate system rotate

[issy varsano]

Hi , any idea if is possible to select where to putthe coordinate system and to rotate it arround z-axis in case of need

as several machines use swapped x and y axes

[Christian Kohlöffel]

This can be done with the postprocessor. Check the Wiki for Details

issy varsano <issyv...@gmail.com> schrieb am Do., 22. Aug. 2019, 21:23:

Hi , any idea if is possible to select where to putthe coordinate system and to rotate it arround z-axis in case of need

as several machines use swapped x and y axes

--
--
You received this message because you subscribed to the Google
Groups-group "dxf2gcode-dev".
To post a message, send mail to dxf2gc...@googlegroups.com
To unsubscribe, send mail to dxf2gcode-de...@googlegroups.com
See http://groups.google.de/group/dxf2gcode-dev?hl=en for more options
and the dxf2gcode project page at http://code.google.com/p/dxf2gcode/
---
You received this message because you are subscribed to the Google Groups "dxf2gcode-dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dxf2gcode-de...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dxf2gcode-dev/ab5e6948-fde0-41fb-8931-c76ed62db291%40googlegroups.com.