--
--
You received this message because you are subscribed to the Google
Groups "DS-List" group.
To post to this group, send email to ds-...@googlegroups.com
To unsubscribe from this group, send email to
ds-list+u...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/ds-list?hl=en
Legacy file uploads can be found here:
https://docs.google.com/leaf?id=0B7UT9Nhp99kVZWMwZjdlYjgtYzMwYS00YjVhLTgwYWEtMGU2YTc2YzZmNWM4&hl=en
---
You received this message because you are subscribed to the Google Groups "DS-List" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ds-list+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/D57790BB-5C5D-4582-A516-954AD2B80698%40gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/971804F9-002C-4AA9-85C0-D58AB8951BEF%40gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/CAE92iiyEfGh2UbBt2TXGPJLC6zWKu1Km18gHNGU218KWM1QNAg%40mail.gmail.com.
I have an SDI to HDI convertor.
That feeds a ATEM Mini Pro. Also being fed by a camera, and a feed from my graphics card.(the graphics card feed allows me to show my desktop, or timeline/NLE interface)
Add a mic into the mixer, and you can pretty much do or show anything to the client.
Then the output of the mixer goes to either Zoom or Youtube live.
(Honestly…trying to remember if YouTube live was fed from OBS…which was fed by the mixer…been a while since I’ve done that one.)
(I think the ATEM is needed for the multibridge…but I’d have to check that)
By far zoom is the easiest with this setup, and looks quite good, depending on their internet connection.
Plus with this setup, I can use a real camera, and am not locked into a crappy webcam.
I do have a webpresenter in storage. (It’s the old version…720 only) To be honest, it worked fine, but was limited to 720. Super easy. Feed an SDI into it, and it turns it into a web cam feed as far as zoom is concerned. Much the same way that the ATEM mini pro does now, but ATEM allows multiple inputs, and better control over audio sources.
I looked into Twitch. (My kid does a lot of twitching) I was under the impression they don’t allow non gaming stuff on the site…maybe that has changed. Not sure how private it is either.
That’s always a big concern for clients. Streaming their unfinished movie, or commercial gets them a bit concerned as to who else might see it.
Sent from Mail for Windows
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/427E45F5-6763-4625-9C40-178B87C60390%40gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/0D9E7617-5B4B-4FA1-AD97-B186D73FA7D1%40hxcore.ol.
We use Sohonet from Los Angeles with clients in Europe. It's
great. In the past we used Makito-X, but Sohonet is way easier to
deploy on both ends.
--
--
You received this message because you are subscribed to the Google
Groups "DS-List" group.
To post to this group, send email to ds-...@googlegroups.com
To unsubscribe from this group, send email to
ds-list+u...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/ds-list?hl=en
Legacy file uploads can be found here:
https://docs.google.com/leaf?id=0B7UT9Nhp99kVZWMwZjdlYjgtYzMwYS00YjVhLTgwYWEtMGU2YTc2YzZmNWM4&hl=en
---
You received this message because you are subscribed to the Google Groups "DS-List" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ds-list+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/43c4712f-845d-f00a-9441-5f29d60a3db1%40hdhead.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/E0D6A643-8BF3-4131-84C1-A07D8C579352%40gmail.com.
Bob I just love it when you chime in with all that smart stuff. You da man! And such a pro!
B
From:
ds-...@googlegroups.com <ds-...@googlegroups.com> on behalf of Bob Maple <bob...@burner.com>
Date: Wednesday, March 22, 2023 at 9:04 AM
To: ds-...@googlegroups.com <ds-...@googlegroups.com>
Subject: Re: Streaming for remote viewings
[EXTERNAL EMAIL] DO NOT CLICK links or attachments unless you recognize the sender and know the content is safe.
On 3/22/2023 1:26 AM, Andi Loor wrote:
> Banding is to my understanding solely a 8 bit video thing. Not a
> compression thing. Please correct me if I'm wrong.
I can be both, since compression is (among other things) quantizing
pixel blocks to make them smaller thus small variations like skies and
other subtle gradients can get "flattened" across the blocks. 8-bit is
what it is, but if the banding additionally look very blocky it's
bitrate and/or the quality of the compressor (realtime encoders run at
various levels of 'fast' and have to do their best with what they are
given in a short slice of time, and some do a better job than others.)
--
| Bob Maple
| Stick it to the NSA - Get my public key at https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fburner.com%2Fabout%2F&data=05%7C01%7Cbbearg%40lithia.com%7Cb482095f1c9e492df9db08db2aef2507%7Cf1a215ee69104213aec6ac36fdca6048%7C0%7C0%7C638150978832740455%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=TD0%2FxtH2EU7iu4nu1rfIjijQrookcJb6uxrrrbxv%2Blc%3D&reserved=0
|
| When love is gone, there's always justice. And when justice is gone,
| there's always force. And when force is gone, there's always Mom.
| Hi, Mom! -Laurie Anderson
--
--
You received this message because you are subscribed to the Google
Groups "DS-List" group.
To post to this group, send email to ds-...@googlegroups.com
To unsubscribe from this group, send email to
ds-list+u...@googlegroups.com
For more options, visit this group at
Legacy file uploads can be found here:
---
You received this message because you are subscribed to the Google Groups "DS-List" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ds-list+u...@googlegroups.com.
On 28 Nov 2022, at 1:55 pm, Igor Riđanović <ig...@hdhead.com> wrote:
--
--
You received this message because you are subscribed to the Google
Groups "DS-List" group.
To post to this group, send email to ds-...@googlegroups.com
To unsubscribe from this group, send email to
ds-list+u...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/ds-list?hl=en
Legacy file uploads can be found here:
https://docs.google.com/leaf?id=0B7UT9Nhp99kVZWMwZjdlYjgtYzMwYS00YjVhLTgwYWEtMGU2YTc2YzZmNWM4&hl=en
---
You received this message because you are subscribed to the Google Groups "DS-List" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ds-list+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/43c4712f-845d-f00a-9441-5f29d60a3db1%40hdhead.com.
Sohonet "clearviewFlex." That's what it says on the encoder
hardware.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/DC92AFFB-329F-4B4E-A826-643DD8A672FB%40gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/152649f0-8290-4dd0-414b-f8535753b305%40hdhead.com.
I think the advantage of Sohonet's solution is the simplicity of
the interface. My producers can easily setup a job without little
technical knowledge. And it's also very simple on the client end.
Aside from that there are other streaming options that cost far
less but may not be as elegant and simple as Sohonet.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/67FD80A8-EB58-4ECD-AB6E-867FAACCF806%40gmail.com.
On 23 Mar 2023, at 1:49 am, 'Brian Bearg' via DS-List <ds-...@googlegroups.com> wrote:
Bob I just love it when you chime in with all that smart stuff. You da man! And such a pro!B
Legacy file uploads can be found here:
---
You received this message because you are subscribed to the Google Groups "DS-List" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ds-list+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ds-list/MW4PR06MB8441DB630DDEE5E09EBC746AB5869%40MW4PR06MB8441.namprd06.prod.outlook.com.