I am not familiar with COMSOL’s file import abilities. You could try generating a surface mesh and then exporting the surface mesh as an STL file(s). Note that you will get 1 STL file per grain in your microstructure.
--
Mike Jackson
--
You received this message because you are subscribed to the Google Groups "dream3d-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dream3d-user...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dream3d-users/0374390c-b6f8-4498-8000-c9c9a426ed44%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dream3d-users/3675e89a-b412-4af6-b0b9-f8ff4d6f3f15n%40googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "dream3d-users" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/dream3d-users/-Pp7Jpei3VQ/unsubscribe.
To unsubscribe from this group and all its topics, send an email to dream3d-user...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dream3d-users/0cedbe33-5e79-43fd-a3c8-6ab17f0736a2n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dream3d-users/0cedbe33-5e79-43fd-a3c8-6ab17f0736a2n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dream3d-users/070a7b79-a4b4-40bc-b800-df4b8356d394n%40googlegroups.com.