DIAC question

[gunterh...@gmail.com]

It has been a few minutes since I was "active" (like ~8152380 minutes, but who's counting)

I am working on putting together a simple AC motor speed controller for a blower on a coal forge (blacksmithing). I've found a few circuits that may work. 

A couple of questions. DIACs. I'm not familiar with them. The circuits that I've found just say "DB3 DIAC" is there more to spec out? 

I'm looking at something like this

https://drive.google.com/file/d/1Q6AmzJralQQyKOZZ-AdcMVTbjqM0PKkL/view

The other question is who do you get parts from now a days? I've ordered from mouser in the past, but much prefer if I can get local. Surplus Gizmos doesn't have everything that I "need" so am thinking I need to order, but unsure who from anymore.

Thanks.

Dan.

[Jerry Biehler]

Ahh. DIACs. First ran into a schematic that needed one in the 80s when I was kid. Very uncommon even back then. 

I’d personally look at a single phase output VFD. They make them for fractional HP single phase motors. 

DigiKey or mouser is where I order from. About the same service between them. 

-Jerry

On Nov 6, 2025, at 12:19 PM, gunterh...@gmail.com wrote:

It has been a few minutes since I was "active" (like ~8152380 minutes, but who's counting)

--
You received this message because you are subscribed to the Google Groups "dorkbotpdx-blabber" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dorkbotpdx-blab...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/dorkbotpdx-blabber/0d5a071c-b96c-4140-a457-2b24ce6a98f4n%40googlegroups.com.

[Jerry Biehler]

Just looked at the circuit.  That’s… something. What kind of blower do you have?

-Jerry

On Nov 6, 2025, at 4:38 PM, Jerry Biehler <jerry....@gmail.com> wrote:

Ahh. DIACs. First ran into a schematic that needed one in the 80s when I was kid. Very uncommon even back then. 

[Doug Ausmus]

I have a supply of diacs... Look at this curve:

It's a spec'd trigger device. Neon bulbs used to exist that were tightly spec'd and were used as switching devices way back when. Good luck finding stable/spec's neon bulbs now. It is useful when you need this kind of controlled breakdown.

Doug

To view this discussion visit https://groups.google.com/d/msgid/dorkbotpdx-blabber/7149FB5B-3D0E-4A70-9F2E-7C2A27234408%40gmail.com.