--
-- You received this message because you are subscribed to the Google Groups DIYbio group. To post to this group, send email to diy...@googlegroups.com. To unsubscribe from this group, send email to diybio+unsubscribe@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/diybio?hl=en
Learn more at www.diybio.org
---
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diybio+unsubscribe@googlegroups.com.
To post to this group, send email to diy...@googlegroups.com.
Visit this group at https://groups.google.com/group/diybio.
To view this discussion on the web visit https://groups.google.com/d/msgid/diybio/0687ec8a-b6c3-4c62-a8bf-0289b005c521%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
I was just looking at buying a NuAire hood for a hundred bucks, or so... and was wondering if you (or anyone else here) had experience with it. I want to do some spin-coating, and feel like I'd want exhausting during initial prep, but clean air after prep was done when I was actually going to be using the stuff I spin-coat.