FreeDV Internet reporter Update?

[Stefan N.]

Hi all.

The improvements to the reporter's filters in version 2.2.0 are great.
It would be helpful to see this update in the Internet Reporter, too.
Even when you make the best possible use of the available filter options, it is becoming increasingly confusing sometimes.

73, Stefan

[Mooneer Salem]

Hi Stefan,

Done. See below:

(you may need to push Ctrl-R to get the latest HTML/JavaScript that implements the idle filter)

Thanks,

-Mooneer K6AQ

--
You received this message because you are subscribed to the Google Groups "digitalvoice" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digitalvoice...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/90454b8c-ce7a-4698-8721-25455a6c3482n%40googlegroups.com.

[stefan netzer]

Wow👍 Great to see Mooneer.

Thanks, that really helps those of us working via the waveform with no software instance open.

By the way, I found that using the waveform on my iPhone (13 Mini with the internal mic) produced significantly better TX audio than using the iPad (which produced the worst audio of all) with a headset and the Flex M. It's not as 'crisp' as using the Flex itself. The same applies to incoming audio from others working via the waveform. The audio is much sharper than via the software. AGT-T is set to 0 and AGC is set to slow.

73, Stefan

Am 12.01.2026 um 10:55 schrieb Mooneer Salem <moo...@gmail.com>:



Hi Stefan,

Done. See below:

You received this message because you are subscribed to a topic in the Google Groups "digitalvoice" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/digitalvoice/ivPsttWxw48/unsubscribe.
To unsubscribe from this group and all its topics, send an email to digitalvoice...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxOHbBxYxW5TT0G8%3DZLtRnssqZaHqrGn9%3DcD_dCcntoKVQ%40mail.gmail.com.

[Stefan N.]

Hi Mooneer,

just wanted to give you a report on the new feature.
Unfortunately, there is no difference between selecting "active in the last * minutes" and "disabled".

Even stations that haven't been active for days are shown.

Cheers, Stefan

[Mooneer Salem]

Hi Stefan,

I took the following screenshot at 10:50 AM my time:

And here's without the idle filter turned on:

According to the above, the idle filter appears to be behaving as expected. Are you able to send a screenshot so I can better see what's going on?

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CABnwQNSjk_YYs2jBT-%2Bz%3DZxPHhFExg7ui03rcp8%2BPxq%2Bwc%3DB1Q%40mail.gmail.com.

[Alan Beard]

Hi all,

Can the "Bands" filter include the whole band? Example: We in Australia have settled on 7045KHz.

There, we only experience a little CW.

Also, the reporting for "freedv-ka9q", the "text" string, there isn't a command line option for it.

Thus, Reporter cannot mention the current band the SDR is on. And, since the frequency 

"freedv-ka9q" reports is outside the "band" eg 6900KHz because it's the SDR centre frequency,

never is reported.

A small niggle, otherwise great work. The SDR RADEv1 decode is fantastic.

Alan VK2ZIW

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxMN8bEV4Xcjint%3DW2PAiv%3DnXwzUsbWyHvesNtv0JB8LSQ%40mail.gmail.com.

[Mooneer Salem]

Hi Alan,

The band filters for the Web version of FreeDV Reporter are currently as follows:

// Handles frequency changes

freqToBandClass = function(freq) {

    if (freq >= 1800000 && freq <= 2000000)

    {

        return "band-160m";

    }     

    else if (freq >= 3500000 && freq <= 4000000)

    {     

        return "band-80m";

    }     

    else if (freq >= 5250000 && freq <= 5450000)

    {     

        return "band-60m";

    }     

    else if (freq >= 7000000 && freq <= 7300000)

    {     

        return "band-40m";

    }   

    else if (freq >= 10100000 && freq <= 10150000)

    {

        return "band-30m";

    }

    else if (freq >= 14000000 && freq <= 14350000)

    {

        return "band-20m";

    }

    else if (freq >= 18068000 && freq <= 18168000)

    {

        return "band-17m";

    }

    else if (freq >= 21000000 && freq <= 21450000)

    {

        return "band-15m";

    }

    else if (freq >= 24890000 && freq <= 24990000)

    {

        return "band-12m";

    }

    else if (freq >= 28000000 && freq <= 29700000)

    {

        return "band-10m";

    }

    else if (freq >= 50000000)

    {

        return "band-vhfuhf";

    }

    else

    {

        return "band-unknown";

    }

};

If these need to be adjusted to reflect band plans in other countries that may have been missed, let me know and I can do that.

Re: KA9Q: there is the ability to pass a specific frequency:

mooneer@fedora:~/freedv-gui/build_linux$ src/integrations/ka9q/freedv-ka9q -h
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:139: freedv-ka9q version 2.0.3-dev-645cd
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:101: Usage: src/integrations/ka9q/freedv-ka9q [-i|--input-sample-rate RATE] [-o|--output-sample-rate RATE] [-c|--reporting-callsign CALLSIGN] [-l|--reporting-locator LOCATOR] [-f|--reporting-freq-hz FREQUENCY_IN_HERTZ] [-h|--help] [-v|--version]
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:102:     -i|--input-sample-rate: The sample rate for int16 audio samples received over standard input (default 8000 Hz).
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:103:     -o|--output-sample-rate: The sample rate for int16 audio samples output over standard output (default 16000 Hz).
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:104:     -c|--reporting-callsign: The callsign to use for FreeDV Reporter reporting.
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:105:     -l|--reporting-locator: The grid square/locator to use for FreeDV Reporter reporting.
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:106:     -f|--reporting-frequency-hz: The frequency to report for FreeDV Reporter reporting, in hertz. (Example: 14236000 for 14.236MHz)
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:107:     -h|--help: This help message.
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:108:     -v|--version: Prints the application version and exits.
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:109:
13:21:37 INFO /home/mooneer/freedv-gui/src/integrations/ka9q/main.cpp:110: Note: Callsign, locator and frequency must all be provided for the application to connect to FreeDV Reporter.
mooneer@fedora:~/freedv-gui/build_linux$

However, I can see how it wouldn't be ideal given how long it takes for RADE decode to start. Adding the ability to adjust that dynamically might be a longer term effort, but adding the same message capability as the Flex waveform might be doable quickly.

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAKVz7kYp6eutCODuSTBy1VbkkRpvTs_JMY-DiqtXxvPF16i0dA%40mail.gmail.com.

[stefan netzer]

Hi Mooneer,

now the band selection doesn’t work properly.
Think the time filter works now, but…
Confusing (hope the video shows that too).

73, Stefan

[Stefan N.]

Mooneer,

just wanted to let you know, that on a windows 11 system it's working all good (but isn't used here primarily)

Mac (MacBook/IpadPro) have the  mentioned  issues.

Cheers, Stefan

> Am 15.01.2026 um 00:51 schrieb Stefan N. <stefan...@googlemail.com>:
>
> Hi Mooneer,
>

> now the band selection doesn’t work properly, so it’s hard to show that on a screenshot.

> Think the time filter works now, but…

> Confusing (hope the video shows that).

[Stefan N.]

Due to further "investigations":

"show active in the last -15 Minutes", saved 16:20, shows these results: screenshot

Is the filter perhaps meant differently?

Shouldn't the stations be completely invisible without any TX event?

Thanks, Stefan

[Mooneer Salem]

Hi Alan,

Currently working on adding reporting message capability to the KA9Q integration: https://github.com/drowe67/freedv-gui/pull/1179. Let me know if you run into any issues.

Thanks,

-Mooneer K6AQ

[Mooneer Salem]

Hi Stefan,

Try going to the FreeDV Reporter page again and let me know how it goes (you may need to push Ctrl-R to fully reload the page). I fixed some bugs on there that may have been contributing to the issue (mainly that the server should be tracking the connect time, not relying on when the client thinks that someone connected).

Thanks,

-Mooneer K6AQ

--

You received this message because you are subscribed to the Google Groups "digitalvoice" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digitalvoice...@googlegroups.com.

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CABnwQNTD_ZZm_qHFRdmaq_ygLZNQ9i-gptswkLhqp7DPVD%3Dx9g%40mail.gmail.com.

[stefan netzer]

Good morning Mooneer,

as i can see (on the IPad) so far☕️:

As soon as a filter is set, the band selection crashes and all stations on all bands are visible.

That’s reproducible, also after a restart of the browser.

I’m going to check the other devices today.

Thanks,

Stefan

Am 15.01.2026 um 22:39 schrieb Mooneer Salem <moo...@gmail.com>:



You received this message because you are subscribed to a topic in the Google Groups "digitalvoice" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/digitalvoice/ivPsttWxw48/unsubscribe.
To unsubscribe from this group and all its topics, send an email to digitalvoice...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxNi7Ufar-dGihc3Wygq016H8nVeHC%3D7jzrV3Q08BVnE0w%40mail.gmail.com.

[Alan Beard]

Chrome browser on Mac Mini M2 and all is fine with Reporter qso.freedv.org.

Changed bands to and fro, Changed "Show active..", all good.

Alan VK2ZIW

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/C4484A78-9748-4581-8912-8FE19BB62418%40googlemail.com.

[Alan Beard]

Can you PM me when it's ready to download and compile the code for "freedv-ka9q"?

I've set the "freedv-ka9q -f $FREQ" to 7160001 for 40m so it's "in band".

Alan VK2ZIW

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxPbGbj0ZfPdb9Tqkv7WT02uR66OCzQN-i2OoMSsQKNYyQ%40mail.gmail.com.

[stefan netzer]

Hi Mooneer.

Update:

it‘s working fine now on the Ipad with Firefox, which is the standard browser here.

On the Macbook it’s fine with Safari, not with Firefox.

PC: Firefox has still issues, but i have no other browser for testing.

73, Stefan

Am 16.01.2026 um 12:18 schrieb Alan Beard <bear...@gmail.com>:



<image.png>

And here's without the idle filter turned on:

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAKVz7kaZWpcteZTPSXJyMK-g2pEZ6k1J13OiVM0QueP02mtRBQ%40mail.gmail.com.

[Dayne Aldridge]

not working correctly with Firefox on my PC at this time

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/177E3563-5189-4DD7-A3FD-40EF2C3E8ABA%40googlemail.com.

[Mooneer Salem]

Hi Stefan,

I fixed another bug with the idle filter. Can you try again? Note that you may need to clear your cache for the latest changes to take effect.

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAKVz7kZR5jxb8qNqYk6Fu4VCtz37uZp%2B-NVbW2jG1YzJec%3DLeg%40mail.gmail.com.

[Mooneer Salem]

Hi Dayne,

Any difference now? As mentioned previously you may need to push Ctrl-R to fully reload the page. 

Thanks, 

-Mooneer K6AQ 

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAEb0nVJtTZ0BNJvgZ0wjasTMR2%3D7mpzJ3tmd8GKPzzqzizapEg%40mail.gmail.com.

[stefan netzer]

Hi Mooneer,

Ipad is OK, except the aspect ratio doesn’t fit. I have to scroll to the right hand side to see the missing parts of the screen. See also the screenshots.

PC with Firefox is working fine now👍

Nothing changed on the MacBook with Firefox so far. Non of the bandfilter working.

Safari is OK.

Thanks and 73,

Stefan

Stefan Netzer

Hohenschwangauplatz 1

81549 München 

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxMzSjzi%3D2DsLEW24h3G%3Dw2y2VZ_sRD3DZa%2B4vM4dHFDdQ%40mail.gmail.com.

[Dayne Aldridge]

Still does not work with Firefox after clearing cashe.  Works great in Chrome!!!!

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxMOfdCCHKSYB0ZtRrpc1JDL8oFzUXFRYUfZqCDvGV4kwg%40mail.gmail.com.

[Mooneer Salem]

Hi Dayne,

Any way you can send a screenshot of what it looks like in Firefox so I can get a better idea of what's wrong?

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAEb0nVLZfrn8j2GTi5aEhd434v3ye62W7%2B07q0nNUkCkjDHgbA%40mail.gmail.com.

[Mooneer Salem]

Hi Stefan,

I'm not sure if the columns themselves can be shrunk at all without making it look worse on mobile devices, but I moved the controls to the left hand side so they're at least easier to get to:

Let me know if that works for you.

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/130C0FD9-051A-4F23-9515-8992E96E59A3%40googlemail.com.

[stefan netzer]



Hi Mooneer,

it helped that you moved the filter to the left in any case👍

It is so, that the aspect ratio doesn’t fit, only when no time filter is set.

I found that the size of the message column produces the issue.

It‘s much narrower only when a time filter ist set.

On the other hand, does it make really sense to have the „RX Mode“ Column? 

TX and RX are usually the same at the end?

Thanks and 73,

Stefan 

Am 18.01.2026 um 00:14 schrieb Mooneer Salem <moo...@gmail.com>:



Hi Stefan,

I'm not sure if the columns themselves can be shrunk at all without making it look worse on mobile devices, but I moved the controls to the left hand side so they're at least easier to get to:

<image.png>

Let me know if that works for you.

Thanks,

-Mooneer K6AQ

On Sat, Jan 17, 2026 at 4:25 AM 'stefan netzer' via digitalvoice <digita...@googlegroups.com> wrote:

Hi Mooneer,

Ipad is OK, except the aspect ratio doesn’t fit. I have to scroll to the right hand side to see the missing parts of the screen. See also the screenshots.

<image0.jpeg>

<image1.jpeg>

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxOr2QfpZRC0d7N%3DsQo3HD6fOxjcpdNbAxnhV8ag0bMA4g%40mail.gmail.com.

[Mooneer Salem]

Hi Stefan,

RX Mode can still be different if one were on the legacy modes for whatever reason, hence why it can't be removed right now. This is something that can be discussed if we do get around to removing those modes, though.

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/F6539B38-51BB-4964-A155-09445726BF02%40googlemail.com.

[Stefan N.]

Hi Mooneer,

RR. 

It‘s working all fine now also with firefox on the MacBook and Ipad.

So, whatever you changed, it helped. Well done 👍 

Thanks and 73,

Stefan

[Dayne Aldridge]

Just got around to checking in with Firefox this morning and whatever you have done fixed the problem.  Works perfectly now!

While I am at it, thank you for the reporter when we are using the program. It is a super help especially during the 40 meter net 

on Tuesday evenings.  

Thanks.

Dayne

K8CHY

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxNkyV3NNcH7rRRj0ug%3D7dJQpAHb_QpX-OozuiXOra8nEA%40mail.gmail.com.

[Stefan N.]

Hi Mooneer,

Is it possible to keep the filter row visible at all times?

By scrolling down it disappears.

To change a filter, you have to scroll all the way back up.

It would be useful to be able to select more than one band or to have a 'favourite bands' setting?

The same applies to the software reporter. 

Thanks and 73,

Stefan

[Stefan N.]

By the way, the row containing the callsign, locator, etc.? It would be nice to see that permanently too.

Thanks, 

Stefan

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/bb64ab6f-9265-4757-a346-891be3eb32c5n%40googlegroups.com.

[Mooneer Salem]

Hi Stefan,

I investigated this a bit and I haven't found a good way to do this yet, but I did add a button that appears on the lower-right corner when you scroll down that will send you back to the top. (You'll need to clear cache or push Ctrl-R to see this.) Let me know how this works for you.

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CABnwQNQ-XD0WR42t2_RGiGykAT2DKNMQx0GtK7sORg-3CPD2tQ%40mail.gmail.com.

[stefan netzer]

Hi Mooneer.

Thanks for trying to improve it.

Actually, I see the same effect as a double-click at the top of the browser?

Anyway, it was just an idea to make the reporter a little clearer, since you sometimes have to scroll far back to the filter selection. 

I have the feeling that the main window has become wider again, and horizontal scrolling is needed again?

Cheers, 

Stefan

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxNvrDf6gzJGRA%3DErD-VoEOWLhBECwrAZuw71XVyYdUh-Q%40mail.gmail.com.

[Mooneer Salem]

Hi Stefan,

I didn't know about the double-clicking at the top, actually. Probably still a good idea to have that other button since this wouldn't be obvious otherwise. 

Re: column widths, it's going to depend on who's logged into FreeDV Reporter. Might be good to implement resizing over the long term, but not much time at the moment.

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/F66A0C23-413B-4874-92EB-B311F40FD777%40googlemail.com.

[Stefan N.]

Hi Mooneer,

as far as I know, double-clicking at the top works on touch screens (iPad/iPhone).

Yeah, the other button is helpful on the desktop versions, which is great.
I get it. The main issue is getting it to run on different browsers and operating systems.

I understand that this is all very time-consuming, in addition to your actual work.

Thanks, and don't stress.

73, Stefan

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxM8e5md_rzJRmVidmyqeLbt%3DgVFH_EbCsFhiC0AprRnYg%40mail.gmail.com.