Beta testers: Patch for startup sliders

[Craig]

DigiPi Beta testers (and only DigiPi Beta testers),

Chuck noticed wsjtx/js8/sstv/fldigi's on/off sliders didn't start the correct app -- thanks Chuck!

I respun the image so you can either re-download DigiPi-2.1-BETA3 and reflash or,

Shell
password:  raspberry
sudo remount
sudo nano /var/www/html/index.php

Edit line #160:

$output = shell_exec('sudo systemctl is-active tnc tnc300b digipeater tracker webchat node winlinkrms pat rigctld ardop wsjtx sstv fldigi js8call');

Remove "rigctld"


This only applies to the BETA3 image -- not DigiPi 2.0-1.

best,
-craig
KM6LYW

[William Tracy]

I didn't report this earlier because I didn't think beta was support, unit I saw your email above.

i removed rigctld from line 160 and booted. but the sliders still act goofy.

When I slide the pat winlink email slider on, the AX.25 Node Network slider automatically comes on and so does the WSJTSX FT8 slider.

The ax25d is not actually running and neither is wjstx

If I slide pat winlink client slider off and ardop on, ax.25 slider turns off.

If is slide slow scan tv on, fldigi slider comes on.

qsstv is actuall running, but the FLDigi slider is on, and Slow Scan TV slider is off.

if i switch the JS8Call slider on, all the sliders go off, but js8call is actually running.

Everyting below the AX.25 slider behaves goofy.

[Don Porter]

It actually fixed my sliders

Don Porter, ThD, MEd
donporterjr.us

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/d56dbff3-c4f0-496a-8422-223c706cfd6dn%40googlegroups.com.

[William Tracy]

I fussed with this problem for 2 days and gave up.  I couldn't figure it out.  I was hoping the line 160 fix would fix it.  It didn't.

[William Tracy]

wait a minute.  I double check line 160 and rigctl was still there.  I remove rigctld and booted.

It now works.  Sorry everybody.  My mistake.