Rut-Ro: Had to revert back to v2.01

[Thomas Dukes]

Webchat is not working for me. When sending a message, all I hear on another radio is like some just keyed the mic. No 'modem' sound. Sound was adjusted to low 60's in alsamixer and stored.

Using a Digirig Mobile with an AnyTone AT-778UV, RPI 3B+.

Seems to receive packets OK, just the TX doesn't work.

Works fine on the previous version.

Sorry, Craig. Been messing with this most all day then decided to try the old version.

[Craig]

Thanks for the report!  We're looking at a couple of digirig mobile issues with Yaesu ht's.

SysInfo show an audio device?

cat /proc/asound/cards?

PkgLog show any errors?

It sounds like you messed with Audio "playback" volumes, and nothing is [MM]uted

cool,
-craig
KM6LYW

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/3e275d97-45ba-4046-899e-328ff3334bbfn%40googlegroups.com.

[Craig]

and just to be sure, webchat is working, it seems like direwolf is the problem.

if you start APRS Digipeater and wait exactly 8 seconds, does it transmit dead air for a second also?

On 6/28/26 14:25, Thomas Dukes wrote:

[Thomas Dukes]

Hey Craig,

I'm kinda done for today. I have a feeling it has to do with the digirig. Using the AIOC, all I needed to do was lower the volume on the Capture to get the volume around 50. I had to cut off the AGC on the digirig to get it in that range. I'll play with again tomorrow,

[Mark Cohen]

I just downloaded the image, wrote it to the card, popped it in the PI and configured it with the Digirig Mobile..

It’s been working for the past 2 hours w/o issue.

Mark

To view this discussion visit https://groups.google.com/d/msgid/digipi/d6a723cf-a0cb-4a13-ade2-915d1e3e0257n%40googlegroups.com.