Good question - I like to set the capture volume (press F4) to about
85, then adjust the physical knob on the radio
until the "audio level" reported in PktLog on received packets is
about 50 (x,y).
As far as transmit (playback) volume goes, I like to find another
radio and listen to your packet and
other packets, get them to be about the same volume by adjusting
playback volume under Audio.
If your rig has "mic gain" you can mess with that as well.
if it helps,
-craig
KM6LYW
On 4/19/26 19:05, WA4SKI wrote:
I've been experimenting with the Audio settings on my DigiPi
running in Digipeater mode. I appears that the Capture audio is
set as a combination of the volume control on my radio, the actual
volume of audio that would be coming from my radio's speaker, and
the "capture/audio in" setting on my AICO, which I can control via
the Audio settings on the DigiPi. I have the AIOC Audio Out set
to 0, and everything appears to be working correctly. Am I
understanding this correctly? Meaning, in this APRS Digipeater
mode, I only need to adjust the radio's volume and the AICO's
Capture level, and I'm good to go?
--
You received this message because you are subscribed to the Google
Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/2d34b2ca-57ec-4e8a-80b0-f2c0c022facen%40googlegroups.com.