Problem with DRA-zero-pi hat

[KN6 JEK]

I hope someone can help me figure out what I am doing wrong here. I have a brand new Pi zero 2 WH, a brand new DRA-pi zero hat and the small display. When I get to the digipi initialization page it says at the bottom 

Detected audio interface:

— no soundcard —

Shouldn’t it detect the dra-pi-zero hat???

I’m confused by this. Thanks for reading my post 

Steve

[Craig]

Hi Steve,

That's normal.  The DRA PiZero requires a driver to be enabled on next boot, Initialize
enables it.  So, you don't see it on the Initialize page, but you *will* see it on the SysInfo
page after you Initialize and Restart.

good question!  great hardware!

-craig
KM6LYW

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/214c63ed-e579-4808-9458-69b2567f796en%40googlegroups.com.

[Mike Backus]

Can Confirm Craigs reply Below. Seems odd but works just like he says. 

The DRA hat is the best of the several that I have tried. Works beautifully, great engineering, tolerates RF well, Compatible with most radios right out of the box and uses the DigiRig cables that I already had. 

Built a custom cable for a Kenwood commercial radio and have a excellent digipeater where there was not one out here in the Boonies.  

Great software from Craig and it is a complete package. 

[Dave Perkins]

I second what was said about the DRA-Hat. 

It works flawlessly! No RF issues at all. The 3-D printed enclosure is a bit pricey but It does make the whole unit come together.