MKS Tinybee printer control board

[Bernard(Home)]

Al,

Info about the Tinybee controller here:

https://github.com/makerbase-mks/MKS-TinyBee/blob/main/hardware/MKS%20TinyBee%20V1.0_003/MKS%20TinyBee%20V1.0_003%20SCH.pdf

http://wiki.fluidnc.com/en/hardware/3rd-party/MKS_TinyBee

Cheers
Bernard

[Al Johnson]

Thanks. I need to have a closer look at the pwm speed_map and spinup_ms as it
might be flexible enough (maybe with a small tweak?) to use directly with the
laser. I was confusing fluidnc with grblhal regarding the Pico.

[Gwen Jones]

I was thinking the same thing lol. The only thing I understood is 'Small Tweak' I use that

alot in my sewing lol

See you all next meeting

Gwen

--
You received this message because you are subscribed to the Google Groups "Derby Makers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to derby-makers...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/derby-makers/4472159.LvFx2qVVIh%40hob.

[Bernard(Home)]

Yeah, right!

Hope you have a good Easter Weekend.
Bernard

To view this discussion on the web, visit https://groups.google.com/d/msgid/derby-makers/CAPZnw5%3DJqT7M0MssvVZB5iPmfai7Wg1mTMxb-KHp9d58Kg5e7A%40mail.gmail.com.