Departure Requirements

[Ricardo Pérez-Rodríguez]

Hi there

I am trying to move five parts from a buffer to another with labor, then the User Manual indicates

Labor Departure Requirements

This button is used to assign the minimum part requirements that need to be satisfied for the laborer to leave the current element. If you were modelling the situation where a laborer was required to pick up five parts at a buffer and then leave, this would be easily done using this button for the desired buffer. The departure requirements must be specified as a table. Note: For labor departure requirements to work, you will need to ensure that the labor has capacity greater than or equal to the departure requirements, and that the route logic of the labor should is set to a non-blocking type.

However, I can't find the route logic of the labor, where is it?

Many thanks

Ricardo

[BARNES Martin]

I believe that this is an error in the documentation.

Here is a model that does what you specified.

Using Decision Points and paths is the easiest (in my opinion) for this kind of behavior.

 

Hope that it helps.

 

Regards,

 

Martin BARNES
Senior Software Consultant , Manufacturing - Consulting & Technical Services
Office: +1 248 205 5227 Mobile: +1 248 762 1775 Fax: 248 267 8585 martin...@3ds.com
3DS.COM
DS Americas Corp. | 900 North Squirrel Road, Suite 100 | Auburn Hills, MI 48326 | United States

 

 

--
You received this message because you are subscribed to the Google Groups "delmia_quest" group.
To unsubscribe from this group and stop receiving emails from it, send an email to delmia_quest...@googlegroups.com.
To post to this group, send email to delmia...@googlegroups.com.
Visit this group at https://groups.google.com/group/delmia_quest.
To view this discussion on the web visit https://groups.google.com/d/msgid/delmia_quest/d014d35e-20ae-4a1b-b081-14ee62af2ca2%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systèmes does not accept or assume any liability or responsibility for any use of or reliance on this email.

Please be informed that your personal data are processed according to our data privacy policy as described on our website. Should you have any questions related to personal data protection, please contact 3DS Data Protection Officer at 3DS.complia...@3ds.com

For other languages, go to https://www.3ds.com/terms/email-disclaimer

[Ricardo Pérez-Rodríguez]

Thank you!

I get it now, however for some elements it is possible without decision points, for other elements it is necessary, 

I attached an example, well I think so, 

Kind regards,

Dr. Ricardo Pérez-Rodríguez

Researcher

National Council for Science and Technology

Center for Mathematics Research

+52 (449) 9185061

You received this message because you are subscribed to a topic in the Google Groups "delmia_quest" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/delmia_quest/DWIOmVgyC_M/unsubscribe.
To unsubscribe from this group and all its topics, send an email to delmia_quest...@googlegroups.com.

To post to this group, send email to delmia...@googlegroups.com.
Visit this group at https://groups.google.com/group/delmia_quest.

To view this discussion on the web visit https://groups.google.com/d/msgid/delmia_quest/3C4A09BB72A3B0459DA41DE3AF7F9BFF013FDB55FE%40AG-DCC-MBX13.dsone.3ds.com.

[BARNES Martin]

Still here J

 

Ricardo:

Your model just needed the capacity of the laborer to be set to 5.

Then  it worked fine  - for the case with or without Decision points.

 

See attached.

To view this discussion on the web visit https://groups.google.com/d/msgid/delmia_quest/CAEtTE4u%2BHB0RjosBzCHEeHXZhSUP%3D7f2Oo1w2UwoROdmekXiUA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.