read*
Model number
Firmware version
Country of origin
Great and concise information Fraser.
Tim Homer - Lead Engineer
Desert Data Recovery
--
Data Recovery Certification Group / for issue with google group please email sc...@myharddrivedied.com
---
You received this message because you are subscribed to the Google Groups "DataRecoveryCertification" group.
To unsubscribe from this group and stop receiving emails from it, send an email to datarecoverycertif...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/datarecoverycertification/ad077ea9-9edf-4e36-9758-f61c66d4769en%40googlegroups.com.
--
Data Recovery Certification Group / for issue with google group please email sc...@myharddrivedied.com
---
You received this message because you are subscribed to the Google Groups "DataRecoveryCertification" group.
To unsubscribe from this group and stop receiving emails from it, send an email to datarecoverycertif...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/datarecoverycertification/c31d19b1-30a6-4b20-b62c-b120fe6bda75n%40googlegroups.com.
/4k - Perform Resonance Identification (Similar to certtest)
/7Nxxyy,aabb,m mnn - Adaptive Test
xx - start point of tuning range for WP or left range for FC yy - total points in tuning range for WP or right range for FC aa - parameter select 01 - Write pre-compensations (WP) 02 - Boost frequency and Frequency cutoff (FCFB) bb - upper nibble:start zone, lower nibble:end zone mm - start point of tuning range (applicable for FCFB only) nn - total points in tuning range (applicable for FCFB only) mm and nn are only applicable to FCFB tuning. Tuned value is updated in RAM. F
/7Oh,z,deff Read/Write Coarse Offset Calibration
h - Head number (default = head 0) z - Zone number (default = all) if z = number of zones then calibration is done at the ID of the last zone. if z = number of zones +1 then OD of zone 0 is calibrated Tuning is done using the VGA mode. And ff indicates the de - first data rough gain to use ff - last data rough gain to use Best offset value is updated in RAM.
/7dx,y,f Reset Adaptives to the Default Settings
x - Zone Number (default = current zone) if x = number of zones then reset all zones
y - Head Number (default = current head) if y = number of heads then reset all heads f - Flag. If f is entered, the head offset values are reset instead of the channel adaptives (default is channel adaptives).
If anyone out there has researched any of these commands, please do share your findings. :-)Here are the first 10 or so in my database.
https://drive.google.com/file/d/1Y6mp9Zy2hj3P_4m4UM3IhiYKWHhAxb7b/view?usp=sharing
Tim Homer - Lead Engineer
Desert Data Recovery
From: datarecovery...@googlegroups.com <datarecovery...@googlegroups.com> On Behalf Of Markus Bauer
Sent: Friday, June 4, 2021 4:04 PM
To: DataRecoveryCertification <datarecovery...@googlegroups.com>
Subject: Re: DIY fail
--
Data Recovery Certification Group / for issue with google group please email sc...@myharddrivedied.com
---
You received this message because you are subscribed to the Google Groups "DataRecoveryCertification" group.
To unsubscribe from this group and stop receiving emails from it, send an email to datarecoverycertif...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/datarecoverycertification/a43585be-ed67-4e83-b85a-580a85cc67ebn%40googlegroups.com.
+10 to both of you!
FC356103.rpm is the sys file that contains the text strings pertaining to terminal commands. It appears to be the "Diag Cmd Processor Overlay". I suspect that that one would need to start the drive from a loader which would incorporate this overlay file and others. Then the diag commands may work.
--
Data Recovery Certification Group / for issue with google group please email sc...@myharddrivedied.com
---
You received this message because you are subscribed to the Google Groups "DataRecoveryCertification" group.
To unsubscribe from this group and stop receiving emails from it, send an email to datarecoverycertif...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/datarecoverycertification/2362b79b-5760-4693-8139-ff2fa27ca864n%40googlegroups.com.