Domain Pass through to FreePBX PJSip endpoint unable to register, but Chan_SIP can.....

[Andrew Pumpelly]

As subject says, DSipRouter 0.78 - pass through domain to a FreePBX v17 machine and I can register test x100 from outside using chan_sip just fine, but the moment I switch to PJSIP, I'm getting failed reg from groundwire (the soft phone I'm making the attempts with) and repeated entries in log of:

[2025-07-31 16:53:27] WARNING[244955] res_pjsip_registrar.c: AOR '' not found for endpoint 'Kam1' (10.213.0.2:5060)

[2025-07-31 16:54:27] WARNING[244955] res_pjsip_registrar.c: AOR '' not found for endpoint 'Kam1' (10.213.0.2:5060)

If pointed in the right direction, I can sort this out myself, 22+ yrs working w/ Asterisk (before FreePBX even was a thing! LOL) and continue to work on FreePBX/PBXact for a living on the daily - so any pointers in the new realm I'm entering would be appreciated (the realm of sbcs/kamailio is new for me)

And just to give a clear pic - softphone on my iphone -> open internet to dsiprouter in data center -> private ip of FreePBX in DC (it sits on private lan, with dsiprouter between it and internet - I chose netmode 2 dmz for install via prepositioning a settings.py in /etc/dsiprouter/gui/settings.py)

Thanks in advance!

-Andy

[Andrew Pumpelly]

nvm - found this is a thing. Can't have pjsip endpoints and pjsip trunks on same PBX w/ FreePBX.

Dealbreaker.

:(

[Mack Hendricks]

I don’t think we tested it, but it should work.  

--
You received this message because you are subscribed to the Google Groups "dSIPRouter" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dSIPRouter+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/dSIPRouter/9b499860-e3d9-43de-8c4f-91833f58e974n%40googlegroups.com.

[Mack Hendricks]

I’m sure PJSIP support probably needs a small change to make it work.  If you need something immediate engage our paid support (sup...@dopensource.com)  Otherwise, open an GitHub issue and we will address it in an upcoming release .