Errors when trying to print some of the parts

[Marius Tiplea]

Hello everyone,

I've started to build Cyclone PCB Factory. For some of the parts when trying to print them I'm seeing some auto-repaired errors (attaching print-screen).

Please let me know if I should allow the application to auto-correct this errors or print it as is.

Thanks and regards,
Marius

[Carlos García]

I use Cura without an issue. No idea whether the output after auto-repairing the errors will be OK.
Please let us know if you detect gcode problems.

You can always repair the STLs with NetFabb/Meshlab or use Cura instead for the gcode generation.

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-fac...@googlegroups.com.
To post to this group, send email to cyclone-p...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/311722e7-9ce5-4bfb-94ab-668ce862c66c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Marius Tiplea]

Thank you for your reply!

Unfortunately, I had bad experiences with Cura when printing and that's why I've switched to another software. When I print with Cura I get the following behavior: http://i.imgur.com/BCKCTwq.jpg

Could you please tell me what version of Cura are you using and maybe what settings?

Best regards,
Marius

--
You received this message because you are subscribed to a topic in the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/cyclone-pcb-factory/cU0JqdEP47I/unsubscribe.
To unsubscribe from this group and all its topics, send an email to cyclone-pcb-fac...@googlegroups.com.

To post to this group, send email to cyclone-p...@googlegroups.com.

Visit this group at http://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/CAJCftXXOHMD4m_1qhvqCbWj2-%2BXhftkwOpshvo5tM-vLnYWZPw%40mail.gmail.com.

[Carlos García]

I didn't take note neither of the version I used, nor the settings. The latest one should work just fine.

That print result is very odd, no clue on what setting was wrong :S (maybe nozzle diam/filament diam?)

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/CAD%3Djzg3drZnrptyedSVEG_qXGsES%3DzmHqeUTbAD9NMDW64BY8w%40mail.gmail.com.

[Marius Tiplea]

Yeah, I don't know why I'm experiencing that problem. I don't think it's something wrong with the filament diameter. Might be something related to the nozzle but I wasn't able to spot anything wrong.

In the end I've used Slic3r the latest version and then imported in Netfabb. Netfabb repaired them and generated new stl files.

Then used again Slic3r and from the repaired stl I've used the gcode file.

Thank you for your wasted time to answer my messages.

Thanks and regards,

Marius

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/CAJCftXUtKC%3DhPzwBwAbqMApGm4LvqC1HX6EYKJECUJ-S_wErqA%40mail.gmail.com.