Skip to first unread message
gregor christandl
Nov 15, 2014, 7:55:50 AM11/15/14
to cyclone-p...@googlegroups.com
I have bought a Sanguinololu and 3 Pololu DRV8825 motor drivers and will be using a 12V 5A Power supply for my cyclone.
Is it possible to use 4V / 1.2A stpper motors with this setup or should I use 12V stepper motors?
Is it possible to use 4V / 1.2A stpper motors with this setup or should I use 12V stepper motors?
Iceflow
Nov 15, 2014, 9:51:17 AM11/15/14
to cyclone-p...@googlegroups.com
You can use these 4v/1.2A motors :D usually in reprap machines, the motors used arent 12v motors.
El 15 de noviembre de 2014, 13:55, gregor christandl <chris...@gmail.com> escribió:
I have bought a Sanguinololu and 3 Pololu DRV8825 motor drivers and will be using a 12V 5A Power supply for my cyclone.
Is it possible to use 4V / 1.2A stpper motors with this setup or should I use 12V stepper motors?
--
Has recibido este mensaje porque estás suscrito al grupo "Cyclone PCB Factory" de Grupos de Google.
Para anular la suscripción a este grupo y dejar de recibir sus mensajes, envía un correo electrónico a cyclone-pcb-fac...@googlegroups.com.
Para publicar en este grupo, envía un correo electrónico a cyclone-p...@googlegroups.com.
Para ver esta conversación en el sitio web, visita https://groups.google.com/d/msgid/cyclone-pcb-factory/70383996-f1c4-432c-87e7-1fe48d450f2f%40googlegroups.com.
Para acceder a más opciones, visita https://groups.google.com/d/optout.
gregor christandl
Nov 15, 2014, 7:09:04 PM11/15/14
to cyclone-p...@googlegroups.com
Thanks.
I figured it would be possible (as my 3d Printer uses 3.1V 2.5A Steppers while being powered with a 15V PSU), I just wanted to be sure.
I figured it would be possible (as my 3d Printer uses 3.1V 2.5A Steppers while being powered with a 15V PSU), I just wanted to be sure.
On Saturday, November 15, 2014 3:51:17 PM UTC+1, Iceflow wrote:
You can use these 4v/1.2A motors :D usually in reprap machines, the motors used arent 12v motors.
El 15 de noviembre de 2014, 13:55, gregor christandl <chris...@gmail.com> escribió:
I have bought a Sanguinololu and 3 Pololu DRV8825 motor drivers and will be using a 12V 5A Power supply for my cyclone.
Is it possible to use 4V / 1.2A stpper motors with this setup or should I use 12V stepper motors?
--
Has recibido este mensaje porque estás suscrito al grupo "Cyclone PCB Factory" de Grupos de Google.
Para anular la suscripción a este grupo y dejar de recibir sus mensajes, envía un correo electrónico a cyclone-pcb-factory+unsub...@googlegroups.com.
Reply all
Reply to author
Forward
0 new messages